Frequently bought together
The Aeon Labs Door/Window Detector Gen5 is a Z-Wave sensor that detects whether a door or window is open or closed.
The detector uses two magnetic units to detect movement; one is placed on the moving part of the door or window and the other unit on the frame. When the detector is triggered it sends an alert signal to up to six associated Z-Wave devices.
The detector is easily fitted to any door or window using screws or double-sided tape, and as it is battery-operated requires no extra wiring. Battery replacement is simple and the detector even tells you when they need replacing by flashing its LED and sending an alert to the central controller. The unit offers a tampering control and sends an alarm message when tampered.
Note: To be used as part of a Z-Wave network this sensor requires a suitable Z-Wave controller.
Fantastic Wireless Range
The Door & Window Sensor is completely wireless. Despite its small size, it’s very powerfull. It uses a special Z-Wave wireless signal that aims to cause no interference with other technologies in your home. That same wireless signal is ultra-low power, helping the battery last for years. And it does all of this with an antenna that can communicate over 90 meters in an open space.
Small in Size
It attaches to your door and window. Despite its beautiful curves when you don’t want to notice it the Door & Window sensor blends in and becomes a part of your home’s décor. It’s small and looks just beautiful, but without reducing its functionality.
Simple DIY Installation
The Door & Window Sensor is so light that you can install it using only double sided sticky tape. Of course, there are other options including screws and you’ll find them all in the packet. All you’ll need is a screw driver and five minutes of your day.
Changing batteries is inconvenient. Forgetting to change batteries on a sensor that can be used for security can be dangerous. That’s why Door & Window Sensor uses as little power as possible, with an average of 2 years passing before you need to change its batteries. The Door & Window Sensor offers low battery detection and warnings with compatible Z-Wave controllers and gateways.
The Z-Wave Aeon Labs Door/Window Sensor Gen5 is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information
- Technology: Z-Wave Transmitter (868.42MHz); Z-Wave Plus
- Z-Wave Groups: One group and six devices (nodes)
- Detection: Magnetic
- Push-button: Inclusion and exclusion
- LED: Battery level (low)
- Power: 2×AAA batteries
- Operating temperature: 0°C to 40°C
- Dimensions (HxWxD): 79 x 34 x 20mm
- Model number: ZW120
Application Notes, Guides and Videos