The Everspring Flood Sensor is a Z-Wave compatible device that can detect water and possible flooding before it becomes a threat to your property.
The flood detector includes a small sensing device that is connected to the main sensor via a 3m cable. When the unit senses water, it sends an alert signal to up to four other associated Z-Wave devices. This enables it to trigger an alarm, email message via the central controller, or to activate a pre-set event (Scene).
The detector is easily installed on any flat surface using screws or double-sided tape, and as it is battery-operated requires no extra wiring. Battery replacement is simple and the detector even tells you when they need replacing by flashing its LED and sending an alert to the central controller.
Note: To be used as part of a Z-Wave network this sensor requires a suitable Z-Wave controller.
- Technology: Z-Wave Transmitter (868.42MHz)
- Z-Wave Groups: One group and four devices (nodes)
- Sensor: Water sensor
- Push-button: Inclusion, and exclusion
- LED: Battery level (low)
- Power: 3x AA batteries
- Dimensions (HxWxD): 85 x 85 x 41mm
Application Notes, Guides and Videos
1 year ago