The Everspring Illumination Sensor is designed to measure the ambient lighting of your room and communicate signals back to your home automation system's Z-Wave controller, whenever your room's illumination reaches above or fall below the predefined levels.
The intelligent lighting sensor can be used in different scenarios to automatically switch on your lighting when it gets dark and smartly control your curtains if it gets too bright, making your home smart, personalized and energy efficient.
Everspring Illumination sensor detects lighting in the range of 30-1000 Lux, which means it can be used indoors and outdoors. In fact, the light detection range can also be configured manually, so that you receive alerts only when you need it.
The Illumination sensor also comes a backlit LCD display that displays current illumination, timer, battery status, and transmission indication, which means you can keep a check on the levels without connecting to your Z-Wave controller.
Low Battery Alert
The smart sensor runs on 3 x 1.5V AA batteries, and notifies you when the battery gets low with a built-in 60dB beep and LED indication.
Note: To create a smart home automation network, the sensor needs to be a part of a Z-Wave network and connected to a suitable Z-Wave controller.
- Measurement & trigger setting ranges: 30-1000 Lux
- Lux detection range: 0-3000 Lux
- Max. & Min. Ranger Hold
- Digital TN LCD Display
- LCD panel with backlight displays illumination, timer, battery status and transmission indication
- Design for table placing/wall mounting
- 3 x 1.5V AA type battery operation
- Built-in 60dB beep tone reminding sound
Application Notes, Guides and Videos