Everspring In-wall On/Off Module is a Z-Wave module that allows you to toggle electrical appliances wirelessly. The device installs behind a wall switch and allows you to remotely control the appliances connected with the power outlet through a Z-Wave home automation gateway or remote control.
The smart In-wall module has been designed to work perfectly with incandescent, fluorescent or LED lighting. Since it installs inside the wall, it's a convenient way to add smart wireless control to any lighting source in your home. At 230V voltage, this module can support up to 11A resistive, 1200W incandescent, 700W motor, or 320W (40W*8) fluorescent load.
For security, the unit can detect overheating and will automatically turn off the relay to avoid damage. It's also smart enough to automatically remember the status of the relay when it's powered again.
The In-Wall On/Off Module supports 2 sets of dry contacts that can be wired conveniently inside the wall to wirelessly control the connected device. The module does not disrupt the normal functioning of the device, and still allows you to control the connected electrical devices normally from the wall switches .
Note: This unit requires a 3-wire system (including neutral) - Please check your installation before purchasing. Further information about 2-wire and 3-wire installations is available in Application Note 23 - Understanding 2-wire and 3-wire Lighting Systems.
Z-Wave Everspring In-wall On/Off Module is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA).
- Technology: Z-Wave (868.42MHz)
- Power Input: 220-240V/50Hz
- Maximum Power Load: Resistive load Max.11A, Incandescent load Max. 1200W, Fluorescent load Max.320W
- Transmission Range: 30 meters (Indoor; Open space)
- Working Temperature: -10°C - 40°C
Application Notes, Guides and Videos
6 months ago
6 months ago
9 months ago