Z-Wave.Me Wall Controller 2 has the ability to manage its own Z-Wave network (if it is configured as primary controller) and control devices such as sockets, window blinds, dimmer, lights, electronic door locks and more. When integrated with an existing Z-Wave network, it can be used either as primary controller (in absence of central controller) or as a secondary controller.
The switch comes with four buttons, which can either be used as single buttons or button pairs. During inclusion process, this wireless switch checks the new gadget’s functions (switch, dim,…) and assigns the correct functions to its buttons automatically. The connected new device (actuator) can be controlled using the two buttons left (Button 1 = up/on/open, Button 3 = down/off/closed). With buttons 3 and 4, you can include new gadgets to the switch, and even remove devices from your Z-Wave network.
The device is battery-operated and can be mounted on every flat and dry surface. The ZWE_SW7 frame with rocker switch fits perfectly to the WALLC-2 wireless wall switch's board. At first glance, the rocker switch looks like an ordinary rocker switch, but it has significant more functions. For example, the rocker switch can tilt diagonal over the switch's center pushing all 4 buttons in the switch's corners individually. In addition, the switch can distinguish single and double click functions which can be used to trigger appropriate functions.
Application Notes, Guides and Videos
8 months ago
6 months ago