The Z-Wave TZ66 Dual Paddle Wall Switch has been designed to conveniently control electronic appliances as well as Z-Wave devices. The convenient dual paddle switch provides superior control, with the left paddle of the wall switch managing the local load (could be a light switch), while the right paddle providing the capability to control Z-Wave associated devices.
The switch can easily be included and controlled in a Z-Wave network by a remote control or your home automation Z-Wave controller. It's discoverable within a range of 30 metres from your wireless controller.
The TZ66 Dual Paddle Wall Switch allows you to control the local load as well as Z-Wave connected devices in up to three additional Z-Wave groups.
This unit includes switching paddle and a mounting frame. Additionally, it requires 230V power wires and a pattress box for installation.
Wiring and Operation
Note: The switch only controls one wired load up to a max of 6A, it is not a 2-gang switch and will not control two separate loads. It works in a 3-wire system and needs neutral, check your installation before purchasing.
Further information about 2-wire and 3-wire installations is available in Application Note 23 - Understanding 2-wire and 3-wire Lighting Systems.
- Technology: Z-Wave (868.42MHz)
- Colour: Silver
- Maximum load: 6A (resistive)
- Voltage: 230V, 50Hz
- 30m range (indoors)
- Dimensions (LxWxH): 86 x 86 x 47mm
Application Notes, Guides and Videos