The Vision ZP3102-5 Z-Wave motion detector is triggered by movement; allowing it to be used as a security and home automation sensor.
The sensor monitors changes in infrared level and movement that indicate a person's presence. Once detected, the unit sends an alert to up to five associated Z-Wave devices.
The detector also includes a temperature sensor that can be used to monitor the room's temperature or send an alert when the temperature is too low (see note below).
The unit is battery-operated, an alert will be sent to the central controller and the unit's LED will flash when the battery level becomes too low. It also includes a tamper switch that sends an alarm signal if anyone tries to prevent it working.
Note: When used in VERA, the temperature sensor is not available as a separate icon. This means that you must use LUA code to access and use the temperature value.
The Z-Wave Vision Motion Detector - Gen5 is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information
- Technology: Z-Wave (868.42MHz)
- Current: Static current:<25uA
- Voltage: DC3V
- Operating Range: Over 30M
- Operating Temp.: min:-10℃, max:+40℃
- Battery: 1 x CR123A
- PIR Coverage: 120 degree
- Installation: Bracket
- Dimensions (LxWxH): 84x 62 x 50mm
Application Notes, Guides and Videos
10 months ago