Adhoco Switch 13A (ZigBee HA Profile)
- Same hardware as standard S1, but using Certified ZigBee Home Automation Profile instead of Adhoco's own private profile
- Can be implemented in up to 16 rooms and controlled by a single adhoco.H1 control unit
- Supports manual operation without limitation
- The operating program for different terminal equipment categories is already predefined in the adhoco.H1 control unit
- Use of conventional switches and push-buttons
- Supports both automatic and manual operation
AdhocoS.1
The adhoco.S1 is a radio-controlled power switch. It can be used to switch any electrical terminal equipment on or off and is installed in junction boxes, recess-mounted boxes or in similar places suited for electrotechnical installations.
It powers fixed terminal equipment (e.g. ceiling lamps) as well as connected power sockets for mobile terminal equipment (e.g. standard lamps).
You can control the light level in two ways:
- By any commercially available switch or push-button (insulation: 230 V AC) connected to the adhoco.S1 via a two-wire cable;
- via radio commands, from the adhoco.H1 control unit or an adhoco.R1 remote control
In case of a fault on the main control unit, the adhoco.S1 continues to work in manual operation without any limitation; and installation must be carried out by a qualified specialist.
Customers also bought
