Question 1

When you add a Z-Wave network the sensor FGMS-001 (controller Razbery) in the settings is displayed only temperature and illumination. No tamper and motion sensor. Accordingly, they are not in applications. Removed from the network, he added, the problem is not resolved. What to do?

Asked 4 ´years ago | Z-Wave Fibaro Multi Sensor

Question 2

When will you start shipping the HC3?

Asked 4 ´years ago | Fibaro Home Center 3

Question 3

When was this published?

Asked 4 ´years ago | Z-Wave Essentials Book

Question 4

When is this thermostat going to be available? Also, will it work an electric underfloor heating system?

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Heating Thermostat

Question 5

What is the range at which the gestures will work over? And are there any materials the Swipe will not work behind, e.g. glass?

Asked 4 ´years ago | Z-Wave Fibaro Swipe

Question 6

What's the difference between roller shutter 2 & 3? Are there any new features to note?

Asked 4 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 7

What's the average battery life expectancy?

Asked 4 ´years ago | Z-Wave Plus Aeotec Recessed Door Sensor

Question 8

This appears to be a re-incarnation of the Fibaro Universal Binary Sensor which will not now recognise DS18B20 inputs although it used to do so. Is this unit any the more reliable?

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 9

The manual suggests this unit must be installed behind an Air Break Switch. Is this confirmed? As far as I was aware, air break switches are only used in the distribution network?

Asked 4 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 10

So I have this bulb now, it's connected to my vera plus, I can get it to dim and switch on/off. How to i change the color with in vera. Thanks

Asked 4 ´years ago | Z-Wave Plus Aeotec LED Bulb 6 Multi-White (E27)

Question 11

Please could somebody advise me of the hole centre dimensions of the mounting bracket ? I need to fix the mounting bracket directly to an existing UK metal back box. Thank you.

Asked 4 ´years ago | Z-Wave Remotec Scene Master

Question 12

Please can you recommend other night latches which are compatible with the keyless smart lock. This is the only one Yale lists as compatible but I do not like it.

Asked 4 ´years ago | Yale Smart Living Y3 Contemporary Nightlatch

Question 13

Please advise the lead time for these modules. We need to procure 5 of them as soon as available. Regards, Warwick

Asked 4 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 14

Out of stock within 3 days of email saying in stock. Pointless. Bad. How to lose customers.

Asked 4 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 15

Manual says it transmits every 15mins in Normal mode. But does the message contain multiple readings or only a single reading covering the entire 15mins. I am after history with lower granularity, say 1min, but don't want to drain battery with Real-Time mode.

Asked 4 ´years ago | Z-Wave Data Logger for E-Meters

Question 16

Is Z-Wave Plus Aeotec Smart Boost Timer Switch compatible with Piper. Regards, Ruairi

Asked 4 ´years ago | Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 17

Is this Trisensor replacing the Aeotec Multisensor 6, which has 6 different sensors?

Asked 4 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 18

Is this suitable for powering a Zipabox controller?

Asked 4 ´years ago | 12V 30W Interchangeable Power Supply

Question 19

Is this model come with a UK plug ?

Asked 4 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 20

Is this compatible with Vera Plus?

Asked 4 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 21

Is this compatible with Home Assistant?

Asked 4 ´years ago | Z-Wave Fibaro Button

Question 22

Is the common connection a 3v output like the micro modules?

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 23

Is it compatible with google assistant? Can I stream it through a Google Nest Hub?

Asked 4 ´years ago | Aeotec SmartThings Cam 360

Question 24

Im attempting to use this with HomeSeer, has anyone else managed to use a backup & restore function with the same set up ?

Asked 4 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 25

If the z-wave controller is temporarily offline will the chime still sound when the button is pressed, or is all functionality entirely dependent on the z-wave network?

Asked 4 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 26

If I want to change batteries after installation, the whole housing will shoot up in to the insulation since theres no retention ring holding back the housing when I take the sensor out. It makes it near impossible to change batteries unless I'm able to get to the sensor from the backside. How do I do this?

Asked 4 ´years ago | Z-Wave Philio Motion Sensor PSP05 with Round Recessor - Gen5

Question 27

If I mount this in a roof, what's the max angle that it can be moved to in the horizontal & what's the andle of detection?

Asked 4 ´years ago | Z-Wave Philio Motion Sensor PSP05 with Round Recessor - Gen5

Question 28

I used these in the past with LED power supplies but unfortunately even though the static current was under 1 amp, after a while the power supply inrush current would weld the relay contacts closed. I put a thermistor in-line with the load to limit the inrush and Qubino said they were aware of this and working on a solution. Does anyone know if this problem has been fixed?

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 29

I ordered this product before 3 days. Can you tell when the item will be in stock? Thank you.

Asked 4 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 30

I have purchased this and it works fine, but I can't find a way to mount it nicely. UK backboxes and the extension plates for them have recessed mounting tabs. The switch can xxxx on to these with no problem, but it is recessed too far for the front cover to be able to clip onto the main switch housing. Please advise.

Asked 4 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 31

I bought two of these to replace the previous generation ones. however, I'm unable to control these lights remotely on my Vera unit from other devices. Aeotec 4 button remote. I've seen other people who can't now remotely control these. Any ideas?

Asked 4 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 32

I am using the Fibaro Dimmer 2 to control the main lights in my lounge on S1, and to control the lamps by association in Group 5 which are connected to wall dimmers using S2. I have managed to get it all working, but I would like to connect more than one lamp. I have tried to add a second association but it never seems to stick. I have attempted this with OpenHAB, my main server, and with Domoticz control centre. Can you tell me whether this is possible? From the limited documentation I can find, and my experience with associating other devices, I believe it should be.

Asked 4 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 33

I've currently got an AEON S2 installed in my Domoticz environment with a fairly large network of devices. Some of them are in pretty inaccessible spaces. I'm now considering changing the controller but I need to be sure that I can transfer the configuration without re-including the devices. Gareth

Asked 4 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 34

I'm about to pull the trigger on the Conexis L1 and Z-Wave Module 2 for my Fibaro HC2 but I'm hearing lots of reports of the module draining the 4 AA batteries in the Conexis L1 lock, like Malath A mentioned in the review section of this product on Vesternet Does anyone have more insight into this? Thanks Andy

Asked 4 ´years ago | Yale Smart Living Z-Wave Module 2

Question 35

How easy is it to get these working with smartthings?

Asked 4 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 36

How do these behave after a power cut is restored? Can the behaviour be configured like hue bulbs, for example last state? Thanks.

Asked 4 ´years ago | Zigbee Aduro B22 Bulb - Tunable Colour

Question 37

How do I programme the Aeon Labs Clamp meter to record import & export units on Vera Plus?

Asked 4 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 38

Hi. How do you set the parameters for the dimmer 2 with tellstick sent Fibaro Dimmer 2 Parameter Setting: The following parameters need to be set: 20 - 1 - enables the dimmer to work with a toggle switch (default is 0 for a momentary switch) 26 - 1 - enables the dimmers S2 switch to also control the dimmer (default 0) Thanks

Asked 4 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 39

Hi, looking for some information on these with Smartthings Hub. Does it create a z-wave switch for each button, or do you have to try create virtual switches? Thanks,

Asked 4 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 40

Hi, is this works with Homey? Any experience?

Asked 4 ´years ago | Z-Wave Plus Secure 7 Day Programmable Room Thermostat

Question 41

Hi, I have recently installed a set of electric gates with intercom. Can I simply wire this into the existing system such that it will behave as before with the added functionality of control via app? I would be using with SmartThings - should I have any concerns about my gates accidentally/unexpectedly opening? Thanks, Declan.

Asked 4 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule

Question 42

Hi, I had successfully setup 1x MultiSensor 6 (ZW100-C) which required a change of device type. I then purchased 2 more (same model, same firmware) but they have aren't detecting any motion. Is there any advice on how to resolve this? I have tried a number of different DTH, removing and repairing etc and now looking for some help.

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 43

Hi, has anyone had any joy linking with with Samsung Smartthings? Thx

Asked 4 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 44

hi is this light dependent . ie only work at night ? also does it work with n-cube controller?

Asked 4 ´years ago | Z-Wave Philio Motion Sensor PSP05 - Gen5

Question 45

Hey, will it work with the Vera Plus?

Asked 4 ´years ago | Z-Wave Philio 2 * 1.5 KW Relay Inserts

Question 46

Hello. Anyone know if these are shipping with more recent firmware these days? I do not have a Fibaro controller, and have no plans to invest in one, so wouldn't be able to update if they aren't already up to date... Thanks.

Asked 4 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 47

Hello, I was wondering whether you have this item suitable for an american-style box, at the size of 120mm wide, instead of 86mm? Thanks, Gal.

Asked 4 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Two Load - UK

Question 48

hello does anyone know if there is a template for the fibaro hc2 so it will work properly. thanks

Asked 4 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 49

hello - wanted to ask if the device provides data per phase or as a total. thanks!

Asked 4 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 50

Has this been proven to work with HomeSeer?

Asked 4 ´years ago | Z-Wave Fibaro Button

Browse by Topic

Tools