Question 1

Has someone tested this device with a veraplus controller ? (Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5 PHI_PST02-1A)

Asked 4 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 2

Has anyone tried this with the Fibaro dimmer 1? I have a few of the dimmers and have been holding off upgrading to LEDs as you can't get hold of the bypass.

Asked 4 ´years ago | Vision Dimmer Bypass

Question 3

Has anyone got this (Yale Smart Living Z-Wave Module 2) to work with the Zipato Zipabox?

Asked 4 ´years ago | Yale Smart Living Z-Wave Module 2

Question 4

Good afternoon- can you confirm that this will only work with Popp ? and is NOT compatible with any Z-Wave hub devices ie Fibaro ? Best regards Chris

Asked 4 ´years ago | Popp 433 Bridge - Black

Question 5

dose this product works with fibaro HC2?

Asked 4 ´years ago | Z-Wave Popp Weather Station

Question 6

Does this work with Vera Edge ?

Asked 4 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 7

Does this work with the Yale YMF 40 Mortise Lock?

Asked 4 ´years ago | Yale Smart Living Z-Wave Module 2

Question 8

Does this support pulse counting at hardware level ? I'm looking for something to interface to water flow meters with a pulsed output. It would obviously need to store number of pulses received over a certain time period.

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 9

Does this have an outdoor IP rating? If so please could you let me know what it is?

Asked 4 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule with Door Opener

Question 10

Does this function as a normally open switch or normally closed switch? Is this configurable?

Asked 4 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 11

Does this 'smart cable' have a physical power switch, similar to the discontinued Swwidinter zwave cord switches, or is it remote control only.

Asked 4 ´years ago | Zigbee Frient Smart Cable 2

Question 12

Does the siren/doorbell unit fit directly into a UK 3-pin socket or does it require a euro-adaptor?

Asked 4 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 13

Does it work with the z-way software?

Asked 4 ´years ago | Z-Wave.Me USB Stick

Question 14

Does anyone have this working with Homeseer HS3 controllers yet?

Asked 4 ´years ago | Z-Wave Fibaro Heat Controller

Question 15

Do these use the same motion sensor as Aeotec's Multisensor with motion, UV, humidity, vibration, temperature and lux? I'm hoping they don't as the motion sensor in the Aeotec 6-way multisensor is very poor, I have about 5-6 of them and even on the highest setting they often don't detect me even if I walk right up to them and jump around.

Asked 4 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 16

Can you use this to update Aeotec firmware using their Window tools?

Asked 4 ´years ago | Z-Wave.Me USB Stick

Question 17

Can you install your own ringtones?

Asked 4 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 18

Can you clarify what this means, in real terms, "Battery operated possible: 1x PT502035 (400mAh) (only for bridging)"? Can I use it as doorbell with just the batteries or does it have to be plugged in?

Asked 4 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 19

Can Vesternet or any user provide a config file for OpenZWave? I'm trying to write one but not luck.

Asked 4 ´years ago | Z-Wave Plus Secure Boiler Receiver - two channels

Question 20

Can this unit be controlled by other Z-wave controllers? Is the Smart Meter required for it to function?

Asked 4 ´years ago | Qubino 32A Contactor for Smart Meter

Question 21

Can this be used (with the Zipato Zipabox) to perform OTA updates of other devices on the Z-Wave network?

Asked 4 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 22

Can this be configured to control two ACs available in same room at the same time? If yes, are they supposed to match in brand?

Asked 4 ´years ago | Z-Wave Remotec AC IR extender

Question 23

Can the temperature sensitivity be increased using parameters to change the bit length of the temperature sensor?

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 24

Can it be connected to an IPBX (SIP)?

Asked 4 ´years ago | Poly-Control Extendable Security Cylinder for Danalock V3

Question 25

Are there any special instructions for including this in a Vera Edge system. It seemed to install but will only notify about tampering and has no apparent reaction to movement other than a small fashing led. No notifications.

Asked 4 ´years ago | Z-Wave Philio Motion Sensor PSP05 - Gen5

Question 26

Are the actuators (relay wires) really opened for The Bad with crowbar?

Asked 4 ´years ago | Poly-Control Extendable Security Cylinder for Danalock V3

Question 27

Is this work with Samsung Smartthing V3 hub? Can I control the switch using google assistant via Samsung Smartthing Hub v3?

Asked 4 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 28

Does anyone know the trick to getting full functionality (press, press and hold, double press etc.) working with Domoticz?

Asked 4 ´years ago | Z-Wave Remotec Scene Master

Question 29

Does this support MQTT ? View answer

Asked 4 ´years ago | Hubitat Elevation Model C-7 Hub (UK version)

Question 30

Hi, can this operate as a simple on/off switch without the dimmable feature? Thanks in advance. View answer

Asked 4 ´years ago | Z-Wave TKB Single Paddle Wall Dimmer TZ35S - Gen5

Question 31

Is the Z-Wave Plus Philio Outdoor Siren compatible with 2nd gen ring alarm system? View answer

Asked 4 ´years ago | Z-Wave Plus Philio Outdoor Siren

Question 32

What sort of housing would you recommend for this? Would a standard UK single pattress box be suitable? View answer

Asked 4 ´years ago

Question 33

What's the difference between this and the 2.5 apart from bluetooth? View answer

Asked 4 ´years ago | Shelly 2PM PLUS

Question 34

Is it working in israeli z wave? 916 mhz View answer

Asked 4 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 35

Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Answer posted 4 years ago

Question 36

The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Answer posted 4 years ago

Question 37

Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Answer posted 4 years ago

Question 38

The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Answer posted 4 years ago

Question 39

High load switch requires three wires? View answer

Asked 4 ´years ago

Question 40

Vesternet zigbee switch/dimmer - Compatibility with hue bulbs? View answer

Asked 4 ´years ago | Vesternet Zigbee Switch

Question 41

Staircase Switches View answer

Asked 4 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Two Load

Question 42

confusion regarding model View answer

Asked 4 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 43

Is this available with a UK plug? The pictures show European power pins. View answer

Answer posted 4 years ago | Aeotec Zigbee Range Extender Zi

Question 44

Which Version are you selling, I see you list 3 Spec for different regions but which one am i ordering? View answer

Answer posted 4 years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 45

Is this available in EU frequency? Shows US on the back of the box. Are the relays good for 240V AC? View answer

Answer posted 4 years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 46

Is this available in EU frequency? Shows US on the back of the box.Are the relays good for 240V AC? View answer

Answer posted 4 years ago | Z-Wave Plus Zooz Universal Relay

Question 47

hi, will the Aeotec Smart Home work when there is no broadband connection?I am concerned that I will not be able to control things at my home when the internet is down. View answers

Answer posted 4 years ago | Aeotec Smart Home Hub

Question 48

hi, will the Aeotec Smart Home work when there is no broadband connection? I am concerned that I will not be able to control things at my home when the internet is down. View answers

Answer posted 4 years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 49

Do these strips actually have a z-wave controller as the category description states, or are they just dumb LED strips that need a z-wave controller and a power supply?Thanks View answer

Answer posted 4 years ago | All > LED Light Strip Warm White - 2700 Kelvin

Question 50

Hi,I wonder if I can connect this strip directly to the wire?I don't see in the advertisement any explanation how can I connect this strip.I would also like to make sure this strip can work directly with Smartthings and will not require additional hub.Regards,Gal View answer

Answer posted 4 years ago | Zigbee Aduro Led Strip 3 Meters

Browse by Topic

Tools