Is it compatible with Nanoleaf smart light bulbs? View answer
Answer posted 9 years ago | Z-Wave Philio Smart Colour Button Gen5
Does this use the European or USA Z-wave frequency? View answer
Answer posted 9 years ago | Z-Wave Plus Secure Wall Switch
QNAP, OpenHAB + Aeon Labs Z-Stick USB, possible? I'm guessing this is possible, there is a package for OpenHab that will install on QNAP, so if I stick this USB stick into the back of the QNAP box will I be good to go? View answer
Answer posted 9 years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)
I want to use a Fibaro relay to swicth an immersion heater on and off. The load is switched using a double pole relay. Can I simply connect the Fibaro output across the relay energising contacts, or will you need a resistor in series to reduce the current? View answer
Answer posted 9 years ago | Z-Wave Fibaro Double Switch 2
Could you fit this into a upvc door? And does it work with vera? View answers
Answer posted 9 years ago | Z-Wave Plus Aeotec Recessed Door Sensor
Multiple questions --> What is the difference between the bi-stable and the contactor switch ? I need to switch a load of ~ 4k W (electrical water heater) which uses a double switch (live+neutral), which one suits better ? Do u have any feedback from Vera users that have managed to add them in their network (smart meter, contactor, bi-stable) ? View answer
Answer posted 9 years ago | Qubino 32A Bistable Switch for Smart Meter
Can this be used in a bathroom? View answers
Answer posted 9 years ago | Aeotec Recessor (for MultiSensors & TriSensors)
There are plenty of versions for this device. which version are you selling? View answers
Answer posted 10 years ago | Z-Wave Remotec AC IR extender
Can this device with Fibaro Home Centre 2? View answers
Answer posted 10 years ago | Z-Wave Qubino Flush Shutter DC
I look at the instruction manual for the wiring diagrams. I have two wires coming from the wall and it has no wall switch. When I moved in, it had a cheap strip light with shaver socket and its own onboard switch. I have removed this old fitting. I am planning to install an LED strip light running off 12V. I wish to use the Fibaro Dimmer 2 with bypass 2. When I look at the wiring diagram for a 2 wire setup, it assumes I will have a Wall Switch. This makes the diagram useless to me. Can anybody help with an adjusted diagram please? View answer
Answer posted 10 years ago | Z-Wave Fibaro Universal Dimmer 2
I currently have have 1x SRT321 thermostat and 1x SSR303 actuator and ordered a bunch of LC-13 TRV's - however I would need to be able to trigger the boiler if the temperature drops in a room other than where the main SRT321 is located. If I understood the manuals correctly, I shouldn't send the trigger command from my Vera because the SSR303 will go into fail-safe mode if the trigger isn't re-sent within the next hour. So I guess ideally one (or more) SRT321 should be managing the SSR303? So my question is: can multiple SRT321 thermostats be paired with a single SSR303 actuator? View answer
Answer posted 10 years ago | Z-Wave Plus Secure Wall Thermostat with LCD display
Will it work with Mydlink hub GCH-G020 ? ( Z-wave secure wall switch) View answer
Answer posted 10 years ago | Z-Wave Plus Secure Wall Switch
Has anyone figured out how to set the light and humidity thresholds? The manual gives parameter values, sizes and hex/decimal descriptions but setting them don't match and the default values don't match the ones in the manuals, they aren't even close. Trying to set values gives me "Failed to set user settings" in my Vera Edge. View answers
Answer posted 10 years ago | Z-Wave Plus Aeotec MultiSensor 6
Has anyone managed to make this work reliably with Samsung SmartThings? View answer
Answer posted 10 years ago | Z-Wave Qubino Flush Shutter DC
Does this work with Samsung smart things without the fibaro controller? View answers
Answer posted 10 years ago | Z-Wave Fibaro Universal Dimmer 2
Is it working with HC2? I have some issues with it. View answers
Answer posted 10 years ago | Z-Wave Qubino Smart Meter ZMNHTD1 Plus
Can this unit be used to trigger events in a controller (in my case the Homeseer Hometroller Zee S2) rather than being paired with a boiler receiver? I have two electric radiators in a room, and want to turn them on and off based on the thermostat reading. So I would create the various events to change the set point in the Homeseer, but also want the thermostat to trigger the events which turn the radiators on and off. Would that work, or should I be looking at something else? View answers
Answer posted 10 years ago | Z-Wave Plus Secure Wall Thermostat with LCD display
Does this stick battery prevent it from forgetting the network routing? I bought the UZB and whenever i unplug it from the pc or just reboot the pc, all routing is reset and it starts all over again resulting many times in dead nodes.. Is this the correct behaviour? Dow the Aeon stick do the same? View answers
Answer posted 10 years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)
The Fibaro Double Switch 2 Gen5 will work with vera plus? View answers
Answer posted 10 years ago | Z-Wave Fibaro Double Switch 2
How do these cope installed in metal back boxes in a brick wall? I was considering installing these in the ceiling with the light fitting, but with some of the wire configurations i have here, i will need to install deeper metallic back boxes and install behind the switches. View answer
Answer posted 10 years ago | Z-Wave Fibaro Universal Dimmer 2
Can you link sensors together so that if one goes off the others will also trigger? View answers
Answer posted 10 years ago | Z-Wave Fibaro Smoke Sensor
Do you sell a similar night latch for outward opening doors? View answers
Answer posted 10 years ago | Yale Smart Living Y3 Contemporary Nightlatch
When will the UK plug type be available for this product? View answers
Answer posted 10 years ago | Z-Wave Plus Aeotec Smart Switch 6 - Schuko
When will support for the Button be available in Vera Home Control ? View answers
Answer posted 10 years ago
When will support for the Button be available in Vera Home Control ? View answers
Answer posted 10 years ago
Hi all. I have a garden office heated by an electric oil filled radiator which I control with a ZWave socket. I use the temperature sensor in a movement sensor, and I link the two with a software thermostat on a Vera Lite. It works, but I'd prefer to have something where I can physically override the temperature and visually see what the current setting is. This unit looks ideal, but can it be made to switch my simple on/off ZWave socket? And can I set a schedule by simply getting my Vera to set the temperature according to my schedule, rather than using the unit's built in timer? Thanks in advance, Andrew. View answer
Answer posted 10 years ago | Z-Wave Plus Secure 7 Day Programmable Room Thermostat
Will this be usable as a on/off toggle for Fluorescent tube lights? View answer
Answer posted 10 years ago | Z-Wave Fibaro Universal Dimmer 2
Normally when I think about DIN rails, I think about the 2 pole fuse/breakers in my house consumer unit. Where do these fit in ? Do they go in the same unit, next to the breaker for say the lighting ring/circuit I want to control/dim? Or do you recommend they go into a different unit - away from the main breakers etc? View answer
Answer posted 10 years ago | Z-Wave Qubino Din Dimmer Gen5
Do you stock these in polished brass as well as the satin chrome? View answers
Answer posted 10 years ago | Z-Wave Vision Door Lock without Handle
Can you wire this between an LED strip and a 12v transformer? View answer
Answer posted 10 years ago | Z-Wave Qubino Flush Dimmer 0-10V Plus
