Summer Sale 2025 Q&A

Question 1

They were £24.99 before now £34 I'd call that a big difference.

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 2

Why has the prices gone up so much for what is just a rebrand. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 3

Is it resistant to condensation/waterproof? What is the operating humidity range? View answer

Asked 4 ´years ago | Z-Wave Fibaro Multi Sensor

Question 4

When will this item be in stock? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 5

When will this items be on stock :AEOTEC Smartthings motion sensor,door sensor, button ,etc. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 6

How long is the mains cable please? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 7

Is the Aeotec motion sensor the same as the Samsung in terms of range and sleep time after detecting motion? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 8

When will smart buttons will be in stock I have one on order about 8 weeks approx and want to order more items all out of stock In antisipation Harvey View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Button

Question 9

Hi, do I need the switches (as shown in the video) ? Or can I just set up some scenes in my homecentre? View answer

Asked 4 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 10

Hi, Would anyone have any schematic diagrams to show how to install this device to arm a hardwired and non-smart alarm system? Thanks View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 11

Just wondering if you shipp to Cyprus,and also would I need a Samsung Smartthings account on a UK address (region) as I saw many comments that this hubs are theoretically for US/UK market ,will it function normally with an European account via the Samsung app? Feedback much appreciated . Thanks View answer

Asked 4 ´years ago | Aeotec SmartThings Hub (V3)

Question 12

Dear Vesternet, Works Heatit z-smoke correct with fibaro HC3? Thanks. Enrico Kersten View answer

Asked 4 ´years ago | Z-Wave Heatit Z-dym detektor - 230V

Question 13

Is the logo on the front removable ? View answer

Asked 4 ´years ago | Z-Wave Plus MCO Home Glass Touch Dimmer UK

Question 14

Hello, I'm looking to update my secure 321 Thermostat with something that looks a bit more modern but it needs to be battery driven do you have anything that will work with the secure 2 channel receiver I just purchased from you, thanks View answer

Asked 4 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 2 Pipe - Black

Question 15

Hi I would like to install this into a air conditioning/ heating system would you be able to offer me some assistance if I was to supply you with the make and model no of the Ac/ Heating unit ? View answers

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 16

Is the relay single pole or double pole (ie does it switch only the live connection or both L and N connections)? View answer

Asked 4 ´years ago | Z-Wave Heatit Z-Relay - 25A

Question 17

I'm looking for a standalone DC power supply to go with this unit. Does anyone here have any recommendations? View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 18

I have a Vera Plus at the moment and am looking to move to the HC3. I use the dataMine2 plugin on Vera for getting graphs of data over time. Does the HC3 have similar functionality? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 19

Would you have the UK version (3 pin) version ? Thanks Alan. View answer

Asked 5 ´years ago | Aeotec Range Extender 7 - EU Socket

Question 20

Hi Just a follow-up question about import/export power. Is this able to monitor flow direction from one clamp -> i.e. whether my solar system is exporting or not to the grid? Mitul View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 21

Hi All After years of trying to find a good zwave remote control I think I might have hit on a good (crazy) idea. Would this module work behind a light switch if there was no output load to control ? My plan is to use something like this https://www.ukelectricalsupplies.com/retrotouch-07100-simplicity-white-2-gang-retractive-light-switch.htm, so i should get the ability to control four scenes, using s1 and s2 Would I be correct that it will work with out a light to control. Thanks Rob View answer

Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 22

Hi Are there for 2 or 3 wire systems? Does it need a neutral cable? Kind Regards Juan View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Module

Question 23

What is the power consumption in watts? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 24

I can see the 2 and 3 way wiring diagrams without a neutral. Do you have a 2 and 3 way wiring diagram with a neutral? Thanks. View answer

Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 25

The manual says the max cable length is 2m. Is this the length of cable from the unit to Led strip or the Led drip itself? View answer

Asked 5 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 26

Has anyone managed to get these working with HomeSeer v3? I am having difficulties getting all four switches to function in HS3. All four Lights function, but my use case needs the binary switches, not the lights. Every time I exclude and include it's a different combination of Switches that don't work. The lights have worked every time so far. View answer

Asked 5 ´years ago | Z-Wave Inoltre Aeotec WallMote Quad

Question 27

Have these yet been proven to work with Vera Edge or Vera Plus? I have installed one and whilst, after hours working on-line (computer and telephone) with a Micaverde technician (or two), the binary function works, we can get no sensible response from the 2 x DS18B20 connected. View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 28

We are rewiring the house and as part of this will have a neutral at each switch. Two questions I have are 1) for loads less than 50W is a bypass still required even in a 3 wire setup? 2) is there a cheaper alternative to the fibaro which still offers smooth LED dimming? Thanks. View answer

Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 29

does this price include VAT View answer

Asked 5 ´years ago | Z-Wave Fibaro CO Sensor

Question 30

Has anyone got a preview of the UI (user interface) yet. Also, will the new ui use https rather than http? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 31

Can the 3 phase clamp measure the current direction (negative current)? For example, when power is provided to the grid (by a solar system) when self consumption is low. View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec klämkraftmätare - Tre klämmor (60a)

Question 32

Is this item in stock?

Asked 5 ´years ago | Fibaro Home Center 3

Question 33

When will you start shipping the HC3?

Asked 5 ´years ago | Fibaro Home Center 3

Question 34

On Fibaro's website for this product it shows it being able to be installed in audio equipment but there are no references to that type of setup in the manual or instructions. Has anyone tried to use the implant in any appliance to make it smart? If so I assume the compatibility will be based on the appliance and the internal wiring if it can be done. View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 35

Is this product compatible with the New z wave plus V2 , 700 series protocol ? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 36

Does this definitely support frequencies and protocols other than Z-Wave and WiFi? There’s no mention of any others on the Fibaro website. View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 37

What is the difference between Fibaro's HC2 and new HC3? How long will Fibaro support HC2? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 38

Hi, Will you be able to transfer existing devices, scenes etc from HH2 to the HH3 or will everything have to be done from scratch again? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 39

Aside from the upgraded chip, how does this differ from the standard the original RGBW Controller? Are there any benefits worth upgrading for? View answer

Asked 5 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 40

Does this come with a UK plug socket or a European plug socket? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 41

is it compatible with HS3 View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec klämkraftmätare - Tre klämmor (60a)

Question 42

Hi Does this come with a UK standard 3 point plug? I'm trying to create a set up where I have a magnetic strip sensor on a door that will chime once opened and also send an alert to my phone. Do you know if this could be achieved, using this in conjunction with a smart things hub? Thanks View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 43

I bought one of these earlier in the year, am hoping to use to add functionality to an automatic gate opener. I've struggled to get it added into Homeseer correctly, only Output 1 has shown up. Have any Homeseer users had any success getting both outputs to add correctly? If so, any tips? View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 44

Hello Could I use this connected to the 12v bell output (I.e. the +and- terminals) in my house intruder alarm to tell my Samsung SmartThings box that the siren is ringing? This would be a remote alert as lightening frazzled the built-in comms dialler! It’s not clear to me from the manual that I could put the 12v through to say “it’s ringing” and “stopped ringing” when it’s 0v. I am also not clear on whether I will be able to configure it with ST (I don’t have the Fibaro control system), or not. Thank you in advance. Neil

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 45

Is the usb power on permanently or does it switch on and off with the main unit? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 46

Is this model come with a UK plug ?

Asked 6 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 47

I bought two of these to replace the previous generation ones. however, I'm unable to control these lights remotely on my Vera unit from other devices. Aeotec 4 button remote. I've seen other people who can't now remotely control these. Any ideas?

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 48

I will be building a new house starting in a few months time and I want to implant temperature sensors in the concrete slab. I have 2 questions; firstly in the manual it says this can be burried concrete with the right protection, what would that protection be please?? Secondly, what would you recommend for protecting the string of temp tensors so they can be safely buried in the concrete and what cable would you connect them with ?? Thanks Chris

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 49

Does this support pulse counting at hardware level ? I'm looking for something to interface to water flow meters with a pulsed output. It would obviously need to store number of pulses received over a certain time period.

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 50

This appears to be a re-incarnation of the Fibaro Universal Binary Sensor which will not now recognise DS18B20 inputs although it used to do so. Is this unit any the more reliable?

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Summer Sale 2025 Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools