Your 10% offer: eligible devices Q&A

Question 1

Does it work with ds18b20? And compatible with home assistant View answer

Asked 3 ´years ago | Z-Wave Heatit Z-Din 616

Question 2

Does this unit take power factor in to account? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 3

are these ok for dimmable led lamps? if so can it dim a load of 20w led? View answer

Asked 3 ´years ago | Z-Wave Plus MCO Home Glass Touch Dimmer

Question 4

Is it compatible with Vera plus hub View answer

Asked 3 ´years ago | Zigbee Frient Smart Plug Mini - UK

Question 5

I have this linked to a HC3 but always states 'not configured' no matter how many times I try - not compatible? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 6

what temp/temp difference would trigger it? If my elektric bathroom heater blows on it? View answer

Asked 3 ´years ago | Zigbee Frient Intelligent Heat Alarm

Question 7

Would this work as a an entrance keypad to arm/disarm a smart things based security system? View answer

Asked 3 ´years ago | Zigbee Frient Keypad

Question 8

Once the probe is installed into the base, can the actual main device still detect water or just the probe now? View answer

Asked 3 ´years ago | Zigbee Frient Water Leak Detector Probe

Question 9

Will this fit in uk back box View answer

Asked 3 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 10

Is there a way to adjust the sensitivity on the motion sensor or through smart things? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 11

are they hard wire? (120v with battery backup) and do they have an interconnect wire? View answer

Asked 3 ´years ago | Z-Wave Popp 10Years Smoke Detector without separated Siren Function

Question 12

Can the sensor submerge in the water, is it water proof ? View answer

Asked 3 ´years ago | Zigbee Frient Water Leak Detector Probe

Question 13

How long does it take for the proble to dry ? Is the proble plastic or cloth/fabric etc ? View answer

Asked 3 ´years ago | Zigbee Frient Water Leak Detector Probe

Question 14

Does it work with Schlage Connect smart deadbolt? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Button

Question 15

Does the smoke alarm still work if the z wave controller is off-line? View answer

Asked 3 ´years ago | Z-Wave Popp 10Years Smoke Detector without separated Siren Function

Question 16

How long does the battery last? View answer

Asked 3 ´years ago | Z-Wave Popp 10Years Smoke Detector without separated Siren Function

Question 17

Does this work with homeassistant arm/disarm? View answer

Asked 3 ´years ago | Zigbee Frient Keypad

Question 18

Hi, does this work with HC3? Lots of confusing information regarding this particular model... View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 19

will this work without wires using a Samsung Smarthiung V3 hub View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 20

will this work without a fibaro hub using e.g. homeassistant and z-stick 700? View answer

Asked 3 ´years ago | Z-Wave Fibaro CO Sensor

Question 21

Is this zigbee, Z-wave, or both? View answer

Asked 3 ´years ago | Zigbee Frient Water Leak Detector Probe

Question 22

Does this work with the 4th gen alexa with built in zigbee, or do i still need a smarthings hub? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Button

Question 23

Can this button be setup through Google Home so you don't need the Hub? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Button

Question 24

does this button work with the Alexa echo 4? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Button

Question 25

Will this work with a hubitat? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Button

Question 26

Do you save your devices, scenes, automation programming to your cloud in case something happens and you need to s View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 27

Is this a cloud-dependent? or local-dependent? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 28

Does this require subscription? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 29

Does this have the new z wave gen 700 series chip in it? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 30

Will it work with Hubitat alone or do you still need zigbee hub? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 31

Does this work with Smartthings? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 32

Is there a mains powered version of this? Or an alternative smart heat alarm (not smoke) that is mains powered? View answer

Asked 4 ´years ago | Zigbee Frient Intelligent Heat Alarm

Question 33

Works with any bulbs? View answer

Asked 4 ´years ago | Z-Wave Plus MCO Touch Panel Switch - One Load

Question 34

Z-Wave Popp 10Years Smoke Detector without separated Siren Function View answer

Asked 4 ´years ago | Z-Wave Popp 10Years Smoke Detector without separated Siren Function

Question 35

Problems with Fibaro rgbw controller, drivers constantly powered View answer

Asked 4 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 36

Does this work with an existing Hive installation? Thx! View answer

Asked 4 ´years ago | NodOn Zigbee 1-Channel 16A Switch

Question 37

Is the Z-Wave Plus Philio Outdoor Siren compatible with 2nd gen ring alarm system? View answer

Asked 4 ´years ago | Z-Wave Plus Philio Outdoor Siren

Question 38

If powered by USB, can the batteries be left in to cover a power failure? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 39

Staircase Switches View answer

Asked 4 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Two Load

Question 40

Is this available with a UK plug? The pictures show European power pins. View answer

Asked 4 ´years ago | Aeotec Zigbee Range Extender Zi

Question 41

could you use this with an existing wired door bell to replace the sounder? View answer

Asked 4 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 42

I have a small, simple propane fireplace with a 2 wire connection (heat only) that needs to be controlled by a battery powered thermostat. Would this work? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 43

Is there a Device Handler so that this works with smartthings? Although Frient is listed as a partner when adding a device, the keypad is not listed 🙁 Alternatively, maybe another keypad so I can use it with a konnected alarm panel for deactivation by guests. View answer

Asked 4 ´years ago | Zigbee Frient Keypad

Question 44

Would this be suitable to independently control multiple infrared panel heaters?I have a fibaro HC3 and would use Aeotec multi sensors to monitor temperatures. View answer

Asked 4 ´years ago | Z-Wave Heatit Z-Din 616

Question 45

What Z-wave frequencies does the model you are selling work on ?I'm after one that will work in Aus (919.8 MHz, 921.4 MHz) View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 46

Hellow, is this product will work in israel with existing modules? where the zwave frequancy is 916? View answer

Asked 4 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 47

Can't add this to Homeseer - just errors on Addnode.Also, previously with version 6 I have a poe splitter to power it.With this version it doesn't seem to work and a USB to micro usb is supplied. Presumably I need to poe split differently??? ( not entirely sure why it doesn't power ) View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 48

The marketing and product box for this item promotes that you can plug it in and power it from a nearby socket. They show this in the manual for the US 110v version , but for the UK/EU 230v version it suggests it has to be hard wired into the main consumer unit ?As I have a socket right next to the consumer unit? Please could someone explain why I can’t connect the power cable to a UK plug and power it, rather than pay for an electrician to hardwire it? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 49

Sensor 6 has several flaws. Reset button link via a piece of dodgy plastic, poor light level reading, poor UV reading.Apart from these, it was very good. Have they been addressed in Sensor 7? E.G. What range is read for the light level?Can I trust the reset mechanism? Can I assume it will work well with RaZberry? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 50

Zigbee Frient Motion Sensor Hi does the light sensor function work with SmartThings?Thanks View answer

Asked 5 ´years ago | Zigbee Frient Motion Sensor Pro

Your 10% offer: eligible devices Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools