Zigbee Q&A

Question 1

Will this work with a hubitat? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Button

Question 2

Do you save your devices, scenes, automation programming to your cloud in case something happens and you need to s View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 3

Is this a cloud-dependent? or local-dependent? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 4

Does this require subscription? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 5

Does this work with Phillips Hue bulbs? And if so, how does it work with the Philips Hue hub? View answer

Asked 2 ´years ago | Vesternet Zigbee Dimmer

Question 6

Does this work with Flic ? View answer

Asked 2 ´years ago | Aeotec SmartThings Hub (V3)

Question 7

Aeotec Smart Home vestanet Modules View answer

Asked 2 ´years ago | Aeotec SmartThings Hub (V3)

Question 8

Does this have the new z wave gen 700 series chip in it? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 9

Will it work with Hubitat alone or do you still need zigbee hub? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 10

Does this work with Smartthings? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 11

So if I use this instead of an Apple device hub will I still be able to allow and access iCloud recordings and view View answer

Asked 2 ´years ago | Aqara Hub M2

Question 12

I have a 3 wire dimmer, can i use the bypass to stop flicker? View answer

Asked 2 ´years ago | Vesternet Bypass

Question 13

Does this only work with the Aqara Hub? Or will it work with any Zigbee Hub? I'm running HomeSeer. View answer

Asked 2 ´years ago | Aqara Termostat til radiator E1

Question 14

Is there a mains powered version of this? Or an alternative smart heat alarm (not smoke) that is mains powered? View answer

Asked 2 ´years ago | Zigbee Frient Intelligent Heat Alarm

Question 15

Touchlink (bind) to multiple devices? View answer

Asked 2 ´years ago | Vesternet Zigbee Wall Controller - 4 Button

Question 16

Can add this in line near the extractor fan unit rather than at the fused spur switch as there is no room? View answer

Asked 2 ´years ago | Vesternet Zigbee High Load Switch

Question 17

Vesternet zigbee motor controller positioning. View answers

Asked 2 ´years ago | Vesternet Zigbee Motor Controller

Question 18

Modbus View answer

Asked 2 ´years ago | Hubitat Elevation Model C-7 Hub

Question 19

Does the Aqara single switch module with neutral work with an Aqara E1 hub View answer

Asked 2 ´years ago | Aqara Single Switch Module T1 (With Neutral)

Question 20

Does this support MQTT ? View answer

Asked 2 ´years ago | Hubitat Elevation Model C-7 Hub

Question 21

Does this work with an existing Hive installation? Thx! View answer

Asked 2 ´years ago | NodOn Zigbee 1-Kanal-16A-Relaisschalter SIN-4-1-20

Question 22

Vesternet zigbee switch/dimmer - Compatibility with hue bulbs? View answer

Asked 2 ´years ago | Vesternet Zigbee Schalter

Question 23

Is this available with a UK plug? The pictures show European power pins. View answer

Asked 2 ´years ago | Aeotec Zigbee Range Extender Zi

Question 24

hi, will the Aeotec Smart Home work when there is no broadband connection?I am concerned that I will not be able to control things at my home when the internet is down. View answers

Asked 3 ´years ago | Aeotec SmartThings Hub (V3)

Question 25

Is there a Device Handler so that this works with smartthings? Although Frient is listed as a partner when adding a device, the keypad is not listed 🙁 Alternatively, maybe another keypad so I can use it with a konnected alarm panel for deactivation by guests. View answer

Asked 3 ´years ago | Zigbee Frient Keypad

Question 26

Zigbee Frient Motion Sensor Hi does the light sensor function work with SmartThings?Thanks View answer

Asked 3 ´years ago | Zigbee Frient Motion Sensor Pro

Question 27

Will this work with lights and smart plugs connected via a Hue gateway? More specifically, I am using Home Assistant with a Hue gateway controlling a mix of Ikea Tradfri and other brands of bulbs/smart plugs. I am looking for a wall-mounted controller that Home Assistant can see and that ideally can control lights directly in case the hub loses connectivity. View answer

Asked 3 ´years ago | Vesternet Zigbee Wand-Controller - 8 Tasten

Question 28

Does this work with Home Assistant? View answer

Asked 3 ´years ago | Vesternet Zigbee Dimmer

Question 29

Can you please confirm which version of ZigBee this interface uses? Is it Hue ort SmartThings compatible? The photo doesn't show a ZigBee logo and suggests that it is 2.4GHz RF only control? View answer

Asked 3 ´years ago | Zigbee Controller For RGB And CCT LED Strip

Question 30

what is the size of the motion sensor? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 31

Does this 'smart cable' have a physical power switch, similar to the discontinued Swwidinter zwave cord switches, or is it remote control only.

Asked 4 ´years ago | Zigbee Frient Smart Cable

Question 32

What’s the rated inductive load in amps for this? Many thanks. View answer

Asked 4 ´years ago | Zigbee Frient Smart Cable

Question 33

Does this integrate into smasung smartthings like the fire detector? View answer

Asked 4 ´years ago | Zigbee Frient Intelligent Heat Alarm

Question 34

Hi. Would I be able to use this at the same time as a Razzberry board or do they both require the same part of the gpio header (Pi3)? View answer

Asked 4 ´years ago | Zigbee Popp ZB-Shield

Question 35

Is there a battery included, just so I know if i need to order a seperate one or not, Thanks. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 36

Hi, I'm assuming I'll be able to control the Zigbee Popp Smart Thermostat via my Homey Hub. Can you confirm please? Many thanks David View answer

Asked 4 ´years ago | Zigbee Popp Smart Thermostat

Question 37

They were £24.99 before now £34 I'd call that a big difference.

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 38

Why has the prices gone up so much for what is just a rebrand. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 39

When will this item be in stock? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 40

When will this items be on stock :AEOTEC Smartthings motion sensor,door sensor, button ,etc. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 41

Is the Aeotec motion sensor the same as the Samsung in terms of range and sleep time after detecting motion? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 42

When will smart buttons will be in stock I have one on order about 8 weeks approx and want to order more items all out of stock In antisipation Harvey View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Button

Question 43

Just wondering if you shipp to Cyprus,and also would I need a Samsung Smartthings account on a UK address (region) as I saw many comments that this hubs are theoretically for US/UK market ,will it function normally with an European account via the Samsung app? Feedback much appreciated . Thanks View answer

Asked 4 ´years ago | Aeotec SmartThings Hub (V3)

Question 44

Do you know when the Hubitat Elevation Model C-7 Hub will be back in stock? View answer

Asked 4 ´years ago | Hubitat Elevation Model C-7 Hub

Question 45

Do you have any info when Aeotec's 700 series Zwave Controller (that they acquired from Popp) is expected to appear. Trying to make an intelligent choice to replace aging Vera unit and leaning towards the Hubitat, mostly because it's the only one available! View answer

Asked 5 ´years ago | Hubitat Elevation Model C-7 Hub

Question 46

Will it be the new c-7 in stock late July ? Do you ship to Sweden? /Mattias View answer

Asked 5 ´years ago | Hubitat Elevation Model C-7 Hub

Question 47

I have a Vera Plus at the moment and am looking to move to the HC3. I use the dataMine2 plugin on Vera for getting graphs of data over time. Does the HC3 have similar functionality? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 48

What model is this? is it the C5 Version? View answer

Asked 5 ´years ago | Hubitat Elevation Model C-7 Hub

Question 49

Hi, Is this the hubitat elevation c5 version? /L-O View answer

Asked 5 ´years ago | Hubitat Elevation Model C-7 Hub

Question 50

What is the power consumption in watts? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Zigbee Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools