Eutonomy Adapter DIN for Fibaro Dimmer FGD-212 with push-buttons is used to install the Fibaro Dimmer FGD-212 module on DIN TH35/TS35 type rail in the electrical switchboard.
DIN for Fibaro Dimmer FGD-212 with push-buttons
Used to install the Fibaro Dimmer FGD-212 module on DIN TH35/TS35 type rail in the electrical switchboard
The euFIX D212 Adapter consists of the case and the base board
The dimensions of the case are appropriate for a standard DIN TH35/TS35 type rail
An optional Fibaro Bypass FGB-002 module (sold separately) can also be connected to the adapter's screw terminals
Micro-push-buttons S1 & S2 used for control, inclusion of the module within the Z-Wave system or to remove it from the system without opening the adapter's case
Available in simplified D212NP version without push buttons
euFIX. DIN TH35 rail adapters for Fibaro modules
Eutonomy euFIX are adapters for Fibaro modules which help you to install and maintain system which require mounting Fibaro modules inside electric rack.
Eutonomy euFIX are available for the following Fibaro modules: FGD-212, FGR-222, FGS-212, FGS-213, FGS-222 and FGS-223. All euFIX adapters are available in 2 versions: with or without buttons.
euFIX D212
The Eutonomy euFIX D212 Adapter is used to install the Fibaro Dimmer FGD-212 module (sold separately) on DIN TH35/TS35 type rail in the electrical switchboard.
The euFIX D212 Adapter consists of the case and the base board, where the FGD-212 module is mounted. The dimensions of the case are appropriate for a standard DIN TH35/TS35 type rail. The base board contains a set of screw terminals, where all the wires (power supply, input and output signals, control pushbuttons) can be safely connected.
An optional Fibaro Bypass FGB-002 module (sold separately) can also be connected to the adapter's screw terminals. The front panel of the case contains two diagnostics micro-push-buttons S1 & S2, which can be used to control the module, to register the module within the Z-Wave system or to remove it from the system without opening the adapter's case.
The simplified D212NP variation (available separately) does not have the micro-pushbuttons.
Front and side view of the euFIX D212 Adapter (dimensions are given in mm):
Technical Details
Supply voltage: 230 V AC +/-10%, 50–60 Hz
Load current: max 250 W
Dimensions: 34.8 x 87.3 x 64.7 mm
Width in TE module units: 2 TE modules
Conductor wires cross section: max. 2.5 mm2
Maximum length of wires connected to Sx, S1, S2 inputs: 20 m
We ship worldwide... simply add products to cart to see real time shipping prices & delivery times based on weight and location.
If you’re not 100% satisfied with your purchase you can return any unused products within 365 days.
If you have problems with a new purchase, our support team will work with you to resolve. And if you still have any concerns you can return it within 14 days for replacement or refund.