Fibaro Dimmer Bypass 2 The Dimmer Bypass enables the Fibaro Dimmer 2 module to control lamps which have a power of less than 50W. It is ideal f...

  Recessor for MultiSensor 6 Z-Wave Aeotec Recessor has been designed to help you install Aeotec Multisensor 6 or Aeotec Trisensor on a ceiling o...

UK adapter enables any EU (Schuko) plug style device to be plugged into a UK wall socket.This adapter is shipped with all device and controllers th...

The Z-Wave wireless protocol is one of today's most widely adopted home automation technologies. Different products from different vendors work tog...

    Bypass for Nano Dimmer. Aeotec Bypass is a capacitive device and can only be used for Aeotec Nano Dimmer (sold separately). When your Nano Di...

Works with Vesternet Modules Z-Wave Dimmer Zigbee Dimmer Z-Wave Switch Zigbee Switch Here’s What’s Included With Every Vest...

UK mains lead with IEC connector - ideal for replacing the EU (Schuko) lead supplied with the Fibaro Home Center 2 (HC2)

Low priced, Receive + transmit function, Standard USB interface, Supports the largest range of sensors and actors, Supported by many Home Automatio...

IDEAL POWER 30W 12V 2.5A AC-DC Interchangeable Power Supply with high reliability comes with 4x Interchangeable AC plugs (Australia, Europe, UK and...

Popp Mains Adapter can be used to power up the Z-Wave Popp Smoke Detector with mains supply. It eliminates the need to insert batteries in your smo...

  The mounting plate is designed to support your installation of the Sensative Strip. If the installation of the sensor is difficult because of th...

Solar Panel The most convenient worry-free charging option for your new iblinds Kit. No tools needed. Simple installation.

  The rectangular magnet from Sensative serves as an accessory for the Sensative STRIP Door/Window Sensor

High reliability 4x Interchangeable AC plugs (Australia, Europe, UK and US) USB Socket connector Built-in over-Voltage, over-current and short c...

Official Raspberry Pi power supply, ideal for use with any Raspberry Pi board. This power supply comes with 1.5m Micro USB lead and changeable head...

Heltun Micro Module Adapter Micro Module Adapter allows installers and electricians to directly connect the relay switches to the electrical pan...

The external power supply enables permanent electricity supply for the Popp Keypad (POPE700045). Thanks to this option it isn't necessary to change...

Meanwell 24V power adapter for LED Strip Controller This 24V power adapter works with the Gledopto LED Strip Controller and LED Strips. The power...

High reliability 4x Interchangeable AC plugs (Australia, Europe, UK and US) USB Socket connector Built-in over-Voltage, over-current and short c...

  The mounting plate is designed to extend the functionality of the Sensative STRIPS Drip. If the sensors of the Sensative STRIPS Drip no longer f...

UK to EU adapter enables any UK appliance to be plugged into any EU (Schuko) plug style device.

FIBARO Switch Button with lightguide for FIBARO Walli Series Devices

  The round magnet from Sensative serves as an accessory for the Sensative STRIP Door/Window Sensor

Accessory part: FIBARO Double cover plate for devices of the FIBARO Walli series.

Z-Wave Plus Remotec ZXT-800 Z-Wave to IR Converter for AC & AV control The Remotec ZXT800 is an Z-Wave to IR AC & AV Converter, useable f...

Fibaro Wall-Mounted Ethernet Non-Smart Outlet (non-smart).

Accessory part: FIBARO Triple cover plate for devices of the FIBARO Walli series.

Sensative +Switch The Sensative +Switch adds a button to the Strips Comfort 700 Z-Wave to control IoT devices and scenarios. By simply sliding th...

Popp 433 Bridge The POPP 433 Bridge enables your POPP Hub to be connected to RF433 MHz devices (fixed code). Therefore you can connect devices li...

Fibaro Nice HubPowerbank The Fibaro Nice HubPowerbank is a mobile 3G/4G (LTE) router with USB power supply. HubPowerbank allows you to connect th...

LINCE CPlus cylinder, 30-30, D cam, Nickel finish, 5 keys The CPlus cylinder is a security cylinder with Euro profile for mounting the Danalock. ...

Fibaro Mounting frame for Walli unit installation with Legrand fronts.

Fibaro Mounting frame for Walli unit installation with Gira fronts GIRA 55.

Fibaro Wall-Mounted Ethernet Non-Smart Outlet (non-smart).

Accessory part: FIBARO Single cover plate for devices of the FIBARO Walli series.

TRULY SMART & INTEGRATED BUILDING With euLINK the FIBARO smart building solution is now able to combine the most important management functio...

The euLINK DALI port is a peripheral module for euLINK and for euLINK Lite gateways that connects them to the DALI bus to issue commands to light...

Popp 433 Bridge The POPP 433 Bridge enables your POPP Hub to be connected to RF433 MHz devices (fixed code). Therefore you can connect devices li...

Eurotronic Design Panel for Spirit Smart Radiator Thermostat - 3 Pack The new Spirit thermostat by EUROtronic has a completely new design. Choose b...

Fibaro Mounting frame for Walli unit installation with Schneider fronts.

Fibaro Wall-Mounted USB Non-Smart Outlet (non-smart).

TRULY SMART & INTEGRATED BUILDING With euLINK the FIBARO smart building solution is now able to combine the most important management functio...