Choosing Smart Home Modules (Zigbee, Z-Wave & WiFi)

 

Vesternet Hardware Devices 

Z-Wave, Zigbee & WiFi Modules are probably the most flexible devices available for your Smart Home as they can be used to control pretty much anything you can think of - lighting, power, pumps, blinds, awnings, heating, cooling, gates... the list is endless. Combine them with other Smart Home devices like sensors and you can have full control of your home.

Manufacturers of Z-Wave, Zigbee & WiFI Modules have different types available designed to do specific roles, this gives you the best product for the job, but can make choosing the right Module a little more difficult. You also have the choice between manufacturers to contend with, where some will offer more advanced capabilities and others will offer simpler functionality, often at a cheaper price. Remember that you can mix and match manufacturers on the same system as they are all compatible - more information can be found in our Understanding Compatibility guide.

Additionally, there are two broad Module styles - Standalone and DIN mounted (or mountable via an adapter). Standalone Modules can be used anywhere, including in light switch and socket pattresses (back-boxes), whereas DIN mounted Modules are designed to be mounted on a DIN rail in a suitable enclosure or consumer unit.

This guide explains the purpose of different Modules, what they are used for and gives extra details to help select between the manufacturers.

Standalone Modules and Types

Firstly, almost all Modules are what we term "actuators" - meaning that they physically control an electrical appliance, circuit or light. To do this they control the power to those circuits, so they do need to be wired into the circuits to be controlled. More information is available in our Getting Started guide, and to help you with the wiring, we have numerous wiring guides available in our Wiring Guides section.

Dimmers - Z-Wave | Zigbee | WiFi

Dimmer Modules, as the name implies, enable you to control the brightness of a light. They are wired into the mains lighting circuit and control the voltage going to the lights on that circuit. The new range of Dimmers all now feature "trailing-edge" Dimmer electronics which are designed to work well with dimmable LED bulbs. Of course, they will also work great with halogen bulbs and old style incandescent bulbs.

Dimmer Modules - things to think about:

  • Neutral - Can the Dimmer work without Neutral? This is important if you plan to install the Module in the light switch as most lighting circuits do not have Neutral available at the light switch (termed a 2-wire circuit).
  • Trailing-Edge - The latest Dimmers feature "trailing-edge" control, which means they work well with dimmable LEDs. Older "leading-edge" Dimmers will not work very well with dimmable LEDs.
  • Physical Installation - Dimmer Modules are small and in fact are getting smaller all the time, but they still need a reasonably deep pattress (back-box) for installation to allow room for heat dissipation and wiring to enter and exit safely. Check our our guide on physical installation of a Module for further information.
  • Information - More information about these issues and other things to consider is available in our Inline Lighting guide.

Dimmer Modules - Z-Wave product choices:

Fibaro Dimmer 2 Qubino Mini Dimmer Aeotec Nano Dimmer Vesternet Dimmer
  • Universal (Trailing-Edge and Leading-Edge)
  • On / Off Mode
  • Power Monitoring
  • Auto-Off Timer
  • Max load 250W / 200VA (Resistive Load)
  • Additional switch input
  • Requires Bypass 2 for loads <50W
  • 230V AC Mains Only
  • Does not need Neutral
  • Dimensions: 43 x 38 x 22mm
  • Device(s):
  • Universal (Trailing-Edge)
  • On / Off Mode
  • Power Monitoring
  • Auto-Off Timer
  • Max load 200W (Resistive Load)
  • 230V AC Mains Only
  • Does not need Neutral
  • Dimensions: 38 x 33 x 15mm
  • Device(s):
  • Universal (Trailing-Edge and Leading-Edge)
  • On / Off Mode
  • Power Monitoring
  • Auto-Off Timer
  • Max load 144W (Resistive Load)
  • Additional switch input
  • Requires Nano Bypass for small loads
  • 230V AC Mains Only
  • Does not need Neutral
  • Dimensions: 42 x 40 x 20mm
  • Device(s):
Vesternet Devices come with lots more, for less price.

They're feature packed, and so we have a dedicated technical comparison guide you can READ HERE.

Dimmer Modules - Zigbee product choices:

Vesternet Dimmer
Vesternet Devices come with lots more, for less price.

They're feature packed, and so we have a dedicated technical comparison guide you can READ HERE.

Dimmer Modules - WiFi product choices:

Shelly Dimmer 2
  • On / Off Mode
  • Power Monitoring
  • Auto-Off Timer
  • Max load 220W (Resistive Load)
  • Additional switch input
  • Requires Bypass for small loads
  • 230V AC Mains Only
  • Does not need Neutral
  • Dimensions: 42 x 36 x 14mm
  • Device(s):

Relays / Switches - Z-Wave | Zigbee | WiFi

Relays are physical switches, they include a set of switch contacts that physically open and close allowing you to control the power supplied to the connected load. Relays are incredibly versatile, they can be used anywhere that you wish to turn an appliance or load on and off - lights, power circuits, pumps, gates, etc.

Relays are also useful for lighting circuits where you wish to control lights that are not suitable for control from a Dimmer such as fluorescent and high power outside lights. However, do note that all Relays need Neutral.

Relay Modules - things to think about:

  • Neutral - All Relay Modules need Neutral. Check that you have Neutral available.
  • Single / Double - Most Relay Modules are available in single or double versions. The Single controls one circuit, the Double will control two separate circuits.
  • Dry Contacts - Most Relays have the supply voltage as the output from the contacts. However, some offer "dry contact" versions - this means the contacts do not have a voltage (sometimes referred to as "volt-free") on them allowing them to be used as pure switches in such things as alarms, or perhaps for controlling a low voltage DC circuit.
  • Physical Installation - Relay Modules are small and in fact are getting smaller all the time, but they still need a reasonably deep pattress (back-box) for installation to allow room for heat dissipation and wiring to enter and exit safely. Check our our guide on physical installation of a Module for further information.
  • Information - More information about these issues and other things to consider is available in our Appliance Control & Power Monitoring guide.

Relay Modules - Z-Wave product choices:

Fibaro Switch 2

Fibaro Smart Module

Qubino Relay Plus

Aeotec Nano Switch

HELTUN

HeatIt

Vesternet Switch, 2 Channel Switch & High Load Switch

  • Single and Double versions available
  • Power Monitoring
  • Auto-Off Timer
  • Max load Single: 8A
  • Max load Double: 6.5A (per channel), 10A total
  • Additional switch input (Single)
  • No dry contact - switch output is AC mains only
  • 230V AC Mains Only
  • Must have Neutral
  • Dimensions: 42 x 38 x 20mm
  • Device(s):
  • Single and Double versions available
  • Auto-Off Timer
  • Max load Single: 6.5A
  • Max load Double: 6A (per channel), 9A total
  • Additional switch input (Single)
  • Dry Contacts
  • NO / NC Configurable Outputs
  • Opposite Output Lock (Double)
  • 230V AC Mains and 24V DC
  • Must have Neutral (230V AC Mains)
  • ·Dimensions: 42 x 38 x 20mm
  • Device(s):
  • Single and Double versions available
  • Power Monitoring
  • Auto-Off Timer
  • Max load Single: 10A
  • Max load Double: 4A (per channel), 8A total
  •  Additional switch inputs (Single)
  • Dry Contact version (1D Relay) available
  • Omron Relays for ultimate reliability
  • Optional Temperature Sensor
  • 230V AC Mains and 24V DC
  • Must have Neutral (230V AC Mains)
  • Dimensions: 42 x 37 x 16mm
  • Device(s):
  • Single (High Load) and Quintuple versions available
  • Power Monitoring
  • ·Auto-Off Timer
  • Max load Single: 16A
  • ·Max load Quintuple: 5A (per channel)
  • Optional NTC Temperature Sensor Input (High Load Switch)
  • Dry Contacts (Quintuple)
  • 230V AC Mains or 24 - 48VDC
  • Optional DIN Mount Available
  • Must have Neutral (230V AC Mains)
  • Dimensions: 50 x 50 x 26mm
  • Device(s):
  • HELTUN High Load Switch
  • HELTUN Relay Switch Quinto
  • HELTUN Micro Module Adapter
  • Single (High Load) Output
  • Power Monitoring
  • Auto-Off Timer
  • Max load: 16A
  • Additional switch input
  • 230V AC Mains
  • Must have Neutral (230V AC Mains)
  • Dimensions: 46 x 45 x 25mm

·         Device(s):

Vesternet Devices come with lots more, for less price.

They're feature packed, and so we have a dedicated technical comparison guide you can READ HERE.

 








 



Relay Modules - Zigbee product choices:

Vesternet Switch, 2 Channel Switch & High Load Switch
Vesternet Devices come with lots more, for less price.

They're feature packed, and so we have a dedicated technical comparison guide you can READ HERE.

Relay Modules - WiFi product choices:

Shelly Plus 1 Shelly Plus 1PM Shelly 2.5 Shelly Plus 2PM
  • Single Output
  • Auto-Off Timer
  • Max load: 16A
  • 230V AC Mains
  • Must have Neutral (230V AC Mains)
  • Dimensions: 37 x 42 x 16mm
  • Device(s):
  • Single Output
  • Power Monitoring
  • Auto-Off Timer
  • Max load: 16A
  • 230V AC Mains
  • Must have Neutral (230V AC Mains)
  • Dimensions: 37 x 42 x 16mm
  • Device(s):
  • Dual Outputs
  • Power Monitoring
  • Auto-Off Timer
  • Max load: 10A (per channel), 20A total
  • 230V AC Mains
  • Must have Neutral (230V AC Mains)
  • Dimensions: 36 x 39 x 17mm
  • Device(s):
  • Dual Outputs
  • Power Monitoring
  • Auto-Off Timer
  • Max load: 10A (per channel), 16A total
  • 230V AC Mains
  • Must have Neutral (230V AC Mains)
  • Dimensions: 42 x 28 x 16mm
  • Device(s):

Blinds, Curtains & Shutters - Z-Wave | Zigbee | WiFi

Motor Modules are similar to Relays as they have switch contacts, but have been designed specifically to control motors in things like blinds, curtains and shutters. They allow the Module to be calibrated so that it knows the position of the motor, or rather, what it is controlling - so it can know if a blind is open, closed, 50% open etc, allowing you to have it open or close to preset positions.

Blind / Curtain / Shutter Modules - things to think about:

  • AC Motors - Most Motor Modules are designed to control AC mains (230V AC) motors.
  • Neutral - Like Relays, AC Motor Modules also need Neutral. Check that you have Neutral available.
  • DC Motors - Motors using a DC supply often use a different method to reverse the motor's direction, called "Polarity Reversal" and these need a special Motor Module that is specifically designed for this type of cointrol.
  • Physical Installation - While Motor Modules are small and in fact are getting smaller all the time, they still need a reasonably deep pattress (back-box) for installation to allow room for heat dissipation and wiring to enter and exit safely. Check our our guide on physical installation of a Module for further information.
  • Information - More information about these issues and other things to consider is available in our Climate & Comfort guide.

Blind / Curtain / Shutter Modules - Z-Wave product choices:

Fibaro Roller Shutter 3

Qubino Shutter Plus

Qubino Shutter DC

Aeotec Nano Shutter

HELTUN

Vesternet Motor Controller

  • Control of AC motors
  • Control roller & venetian blinds, shutters, awnings and gates
  • Power Monitoring
  • Auto-Calibration
  • Max load 4.2A per channel (Resistive Loads)
  • 230V AC Mains Only
  • Must have Neutral
  • Dimensions: 42 x 38 x 20mm
  • Device(s):
  • Control of AC motors
  • Control roller & venetian blinds, shutters, awnings and gates
  • Power Monitoring
  • Auto-Calibration
  • Omron Relays for ultimate reliability
  • Optional Temperature Sensor
  • Max load 4.0A per channel (Resistive Loads)
  • 230V AC Mains Only
  • Must have Neutral
  • Dimensions: 42 x 37 x 17mm
  • Device(s):
  • Control of DC motors
  • Control roller & venetian blinds, shutters, awnings and gates using "polarity reversal"
  • Power Monitoring
  • Auto-Calibration
  • Omron Relays for ultimate reliability
  • Optional Temperature Sensor
  • Max load 2.0A per channel (Resistive Loads)
  • 12V or 24V DC Only
  • Dimensions: 42 x 37 x 17mm
  • Device(s):
  • Control of AC motors
  • Control roller & venetian blinds, shutters, awnings and gates
  • Power Monitoring
  • Auto-Calibration
  • Max load 2.5A per channel (Resistive Loads)
  • 230V AC Mains Only
  • Must have Neutral
  • Dimensions: 43 x 40 x 20mm
  • Device(s):
  • Control of AC or DC motors
  • Control one or two motors from a single module
  • Control roller & venetian blinds, shutters, awnings and gates
  • Power Monitoring
  • Auto-Calibration
  • Max load 5A per channel (Resistive Loads)
  • Dry Contacts
  • 230V AC Mains or 24 - 48VDC
  • Optional DIN Mount Available
  • Must have Neutral (230V AC Mains)
  • Dimensions: 50 x 50 x 26mm
  • Device(s):

Vesternet Devices come with lots more, for less price.

They're feature packed, and so we have a dedicated technical comparison guide you can READ HERE.

 










Blind / Curtain / Shutter Modules - Zigbee product choices:

Vesternet Motor Controller
Vesternet Devices come with lots more, for less price.

They're feature packed, and so we have a dedicated technical comparison guide you can READ HERE.

RGB / RGBW Dimmers - Z-Wave | Zigbee | WiFi

These are special Modules that allow you to control the brightness and colour of LED strips. The Modules can control either three (RGB) or four (RGBW) channels, allowing them to control the LED strip's different colour channels (Red, Green, Blue for RGB and Red, Green, Blue and White for RGBW). They can also be used to drive separate channels of single colour LED strips, or even low voltage DC LED / Halogen Bulbs.

RGB / RGBW Modules - things to think about:

  • DC only - Do not confuse these with normal AC mains Dimmers (shown above). RGB / RGBW Dimmers must be installed in the low-voltage (DC) circuit supplying the LED strips (or low voltage DC Bulbs). You use the DC power supply that comes with your LED strips (or low voltage DC Bulbs) to supply power to the Module, which in turn powers the LED strips (or low voltage DC Bulbs).
  • Physical Installation - While these are technically Modules, due to the fact that they need to be powered by a DC power supply they are not typically installed in the same way as a normal Module would be (for example behind an existing light switch). This should be considered when planning your installation, because you will also need to install the AC to DC Power Supply somewhere!

RGB / RGBW Modules - Z-Wave product choices:

Fibaro RGBW Controller 2 Qubino RGBW Dimmer Plus
  • Control of DC LEDs
  • Four Output channels
  • Four external switch / sensor inputs
  • Power Monitoring
  • Max load 12A (6A max for single channel)
  • 12V or 24V DC Only
  • Must be installed in the low voltage circuit
  • Dimensions: 42 x 38 x 18mm
  • Device(s):
  • Control of DC LEDs
  • Four Output channels
  • Four external switch / sensor inputs
  • Max load 13A (8A max for single channel)
  • 12V or 24V DC Only
  • Must be installed in the low voltage circuit
  • Dimensions: 41 x 32 x 15mm
  • Device(s):

RGB / RGBW Modules - WiFi product choices:

Shelly RGBW 2
  • Control of DC LEDs
  • Four Output channels
  • One switch inputs
  • Power Monitoring
  • Max load 12VDC 144W (45W max for single channel)
  • Max load 24VDC 288W (90W max for single channel)
  • 12V or 24V DC Only
  • Must be installed in the low voltage circuit
  • Dimensions: 43mm x 38mm x 14mm
  • Device(s):

Thermostats - Z-Wave | Zigbee | WiFi

Thermostat Modules are similar to Relays as they have switch contacts to control a load - in this case heating of some sort, whether it be a direct electrical wall heater, UFH electrical mat heating or even as a trigger input into a convential water based boiler heating system.

Thermostat Modules - things to think about:

  • Neutral - All Z-Wave Thermostats Modules need Neutral. Check that you have Neutral available.
  • Control Method - Different control methods are available, for example PID, PWM, Hysterisis, etc - make sure to choose a product that will work with your heating sytem!
  • Physical Installation - Thermostat Modules are small and in fact are getting smaller all the time, but they still need a reasonably deep pattress (back-box) for installation to allow room for heat dissipation and wiring to enter and exit safely. Check our our guide on physical installation of a Module for further information.
  • Information - More information about these issues and other things to consider is available in our Heating guide.

Thermostat Modules - Z-Wave product choices:

Qubino Flush On / Off Thermostat 2 HELTUN
  • Control of single output on / off
  • Power Monitoring
  • Hysteresis Control
  • 230V AC Mains or 24V DC
  • Max load 10A
  • Comes with Temperature Sensor
  • Dimensions: 42 x 37 x 17mm
  • Device(s):
  • Control of single output on / off
  • Power Monitoring
  • Hysteresis Control
  • Max load 16A
  • Optional NTC Temperature Sensor Input
  • 230V AC Mains or 24 - 48VDC
  • Optional DIN Mount Available
  • Dimensions: 50 x 50 x 26mm
  • Device(s):

DIN Mounted Modules

DIN mounted Modules have the same functions as the standalone Modules, but are designed to be mounted on a DIN rail. This allows a number of Modules to be installed together in a single enclosure, making the overall installation tidier and easier to maintain.

There are generatlly two DIN mounted Module solutions available - complete DIN Modules ready to fit and a selection of DIN "adapters" that have been designed specifically to house standard Modules allowing them to be fitted to a DIN rail.

DIN Modules - Z-Wave | Zigbee | WiFi

DIN Modules are ready to fit to a DIN rail and are available in various types including Dimmers and Switches.

DIN Modules - Z-Wave product choices:

Qubino DIN Dimmer

Qubino DIN Smart Meter

Qubino DIN 3-Phase Smart Meter

Qubino DIN Contactor (switch)

Qubino DIN Bistable Switch

Heatit Z-Water

Heatit Z-Din 616

• Trailing-Edge
• On / Off Mode
• Power Monitoring
• Auto-Off Timer
• Max load 1A
• Optional Temperature Sensor
• 230V AC Mains and 24V DC
• Must have Neutral (230V AC Mains)
• Dimensions: 18 x 93 x 58mm
• Device(s):
o Qubino DIN Dimmer Plus
o Qubino Temperature Sensor

• Monitors Power Consumption
• Switching (with other Modules)
• Max Current: 65A (230V)
• 230V AC Mains Only
Must have Neutral
• Dimensions: 36 x 90 x 64mm
• Device(s):
o Qubino DIN Smart Meter

• Monitors Power Consumption (3-Phase)
• Switching (with other Modules)
• Max Current: 80A Total, 65A per Phase (230V)
• 230V AC Mains Only
Must have Neutral
• Dimensions: 36 x 90 x 64mm
• Device(s):
o Qubino DIN 3-Phase Smart Meter

• On / Off Switching
• 2-Pole Switch
• Max Current: 32A
Requires Qubino DIN Smart Meter or Qubino DIN 3-Phase Smart Meter
• 230V AC Mains Only
Must have Neutral
• Dimensions: 18 x 85 x 60mm
• Device(s):
o Qubino DIN Contactor

• On / Off Switching
• Bistable Switching
• 4 sets of contacts
• Max Current: 32A
• IR Controlled
• Requires Qubino DIN Smart Meter or Qubino DIN 3-Phase Smart Meter
• 230V AC Mains Only
Must have Neutral
• Dimensions: 36 x 90 x 60mm
• Device(s):
o Qubino DIN Bistable Switch

• On / Off Switching
• Dry-Contact Outputs
• 10 Output Channels
• NO or NC Contacts
• Max Current: 5A per channel
• 4 Analog NTC Temperature Sensor Inputs
• Stepdown transformer for 24DC output built in
• 230V AC Mains Only
Must have Neutral
• Dimensions: 160 x 86 x 58mm
• Device(s):
o Heatit Z-Water

• On / Off Switching
• Dry-Contact Outputs
• 6 Output Channels
• NO or NC Contacts
• Max Current: 16A per channel
• Dry-Contact Sensor Inputs
• 6 Input Channels
• 24V AC or DC Power
• Dimensions: 105 x 85 x 60mm
• Device(s):
o Heatit Z-Din 616

 



DIN Modules - WiFi product choices:


Shelly Pro 1

Shelly Pro 1PM

Shelly Pro 2

Shelly Pro 2PM

Shelly Pro 3

Shelly Pro 4PM

• One Channel
• Two Inputs
• Max load 16A
• WiFi & Ethernet
• 230V AC Mains
Must have Neutral (230V AC Mains)
• Dimensions: 94 x 19 x 69mm
• Device(s):
o Shelly Pro 1

• One Channel
• Two Inputs
• Power Monitoring
• Max load 16A
• WiFi & Ethernet
• 230V AC Mains
Must have Neutral (230V AC Mains)
• Dimensions: 94 x 19 x 69mm
• Device(s):
o Shelly Pro 1PM

• Two Channels
• Two Inputs
• Max load 16A per channel, 25A total
• WiFi & Ethernet
• 230V AC Mains
Must have Neutral (230V AC Mains)
• Dimensions: 94 x 19 x 69mm
• Device(s):
o Shelly Pro 2

• Two Channels
• Two Inputs
• Power Monitoring
• Max load 16A per channel, 25A total
• WiFi & Ethernet
• 230V AC Mains
Must have Neutral (230V AC Mains)
• Dimensions: 94 x 19 x 69mm
• Device(s):
o Shelly Pro 2PM

• Three Channels
• Three Inputs
• Max load 16A per channel, 48A total
• WiFi & Ethernet
• 230V AC Mains
Must have Neutral (230V AC Mains)
• Dimensions: 96 x 53 x 59mm
• Device(s):
o Shelly Pro 3

• Four Channels
• Four Inputs
• Power Monitoring
• Max load 16A per channel, 40A total
• WiFi & Ethernet
• 230V AC Mains
Must have Neutral (230V AC Mains)
• Dimensions: 96 x 53 x 59mm
• Device(s):
o Shelly Pro 4PM


 


DIN Adapters - euFIX for Fibaro | HELTUN

DIN adapters are designed specifically for a particular manufacturers Modules, allowing them to fit into DIN rail enclosures. At this time we're only aware of two manufacturers that make these - Eutonomy, with their euFIX range for Fibaro Z-Wave Modules and HELTUN, who make a single DIN adapter that supports their own High Load Switch and Relay Switch

There are a variety of euFIX DIN adapters available to support Fibaro Z-Wave Modules. Each DIN adapter is available with and without push-buttons - the push-buttons make it simple to Include the Module in the Z-Wave network and to test the Module outputs.

Importantly, the euFIX adapters make ALL of the Fibaro Module's connections accessible - so you keep all the Module's features and functionality, just wrapped up in a DIN housing.

For more information about the euFIX adapters take a look at our blog article - Eutonomy euFIX Fibaro DIN Adapters.

DIN Adapters - product choices:

euFIX Dimmer 2 Adapter euFIX Single Smart Module Adapter euFIX Double Smart Module Adapter euFIX Single Switch 2 Adapter euFIX Double Switch 2 Adapter euFIX Roller Shutter 3 Adapter HELTUN
• Suitable for Fibaro FGD-212 Dimmer
• Push-Button Option
Requires Fibaro Dimmer 2 Module (FGD-212)
• Dimensions: 35 x 88 x 65mm
euFIX Dimmer Adapter (With buttons)
euFIX Dimmer Adapter (Without buttons)
• Suitable for Fibaro Single Smart Module FGS-214
• Push-Button Option
Requires Fibaro Single Smart Module (FGS-214)
• Dimensions: 35 x 88 x 65mm
• Device(s):
• euFIX FGS-214 Adapter (With buttons)
euFIX FGS-214 Adapter (Without buttons)
• Suitable for Fibaro Double Smart Module FGS-224
• Push-Button Option
Requires Fibaro Double Smart Module (FGS-224)
• Dimensions: 35 x 88 x 65mm
• Device(s):
• euFIX FGS-224 Adapter (With buttons)
• euFIX FGS-224 Adapter (Without buttons)
• Suitable for Fibaro Single Switch 2 FGS-213
• Push-Button Option
Requires Fibaro Single Switch 2 Module (FGS-213)
• Dimensions: 35 x 88 x 65mm
• Device(s):
• euFIX FGS-213 Adapter (With buttons)
• euFIX FGS-213 Adapter (Without buttons)
• Suitable for Fibaro Double Switch 2 FGS-223
• Push-Button Option
Requires Fibaro Double Switch 2 Module (FGS-223)
• Dimensions: 35 x 88 x 65mm
• Device(s):
• euFIX FGS-223 Adapter (With buttons)
•  euFIX FGS-223 Adapter (Without buttons)
• Suitable for Fibaro Roller Shutter 3 FGR-223
• Push-Button Option
Requires Fibaro Roller Shutter 3 Module (FGR-223)
• Dimensions: 35 x 88 x 65mm
• Device(s):
• euFIX Roller Shutter 3 Adapter (With buttons)
euFIX Roller Shutter 3 Adapter (Without buttons)
• Suitable for HELTUN High Load Switch & Relay Switch
Requires HELTUN High Load Switch or Relay Switch Module (HE-HLS01 or HE-RS01)
• Dimensions: 87 x 27 x 58mm
• Device(s):
• Heltun Micro Module Adapter

 

Getting Help and Advice

Hopefully this guide has helped clarify what options are available, what the different Z-Wave, Zigbee & WiFi Modules do, and shown the comparison between manufacturers. If you need any further help or advice, contact Vesternet and we will do our best to answer all your questions.