Skip to content
US Express $10 Delivery. Shipping Zigbee & Z-Wave (US 908.42)

Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

by Heltun
Original price $117.41 - Original price $117.41
Original price
$117.41 - $117.41
Current price $117.41

In stock iconIn Stock

Z-Wave Touch Panel Switch, 4 channels.

  • On wall thickness of only 9 mm
  • Six models: solo, duo, trio, quarto, quinto, sexto
  • 30 design combinations: five frames and six glass colours
  • Five highly sensitive touch buttons with 2-color LED backlight for each button
  • Buttons brightness manual and auto control depending on room illumination
  • Ambient temperature, humidity and light sensors
  • Software energy consumption meter
  • 5 dry contact channels with max load of 5A per channel
  • Outputs controls by internal scenarios using sensors, schedules and timers
  • Advanced zero-cross technology
  • Works both with VAC 85-265 and VDC 24-48
  • 20 association groups to control switches, dimmers and motorized shades
  • Latest Z-Wave 700 platform with S2 security and SmartStart
  • First multi frequency Z-Wave device
  • Z-Wave Plus V2 and CE certified

Choosing Z-Wave Wall Switches & Dimmers

Take Control

The HE-TPS04 Advanced Programmable Touch Panel Switch Four Buttons brings ‘Impossibly Smart’ capabilities to your home lighting or motorized blinds, door locks, gates, and valves. It replaces an existing in-wall switch and brings over-the-Internet monitoring, control, and advanced programmability to five connected devices. Quinto is ‘Impossibly Thin’ on the wall yet packed with features to provide the ultimate in control and convenience.

Up to four channel relays with dry contacts & 5 Amp load each. HELTUN Advanced Zero-Cross Technology delivers greatly increased longevity & reliability of the system.

Impossibly Thin

Six Ways To Play

The HELTUN Touch Panel Switch comes in six different configurations to fit any need. Whether one switch or five, the HELTUN Touch Panel Switch is still "Impossibly Thin" and "Impossibly Smart".

Internal Sensors

HELTUN Touch Panel Switches include sensors to monitor temperature, humidity, and ambient light which can be accessed by a Z-Wave controller and used to trigger home automation scenes.The frequency (reporting time) of data updates from sensors can be individually adjusted to meet the needs of your smart home system.

Inputs & Outputs

The main power input can be either 85-265VAC or 12-48VDC. There are five relay outputs each with a maximum 5 Amp load. There are also two independent inputs for relay channels which allow control of systems with different power sources, or to use outputs as dry contacts: e.g. to switch On/Off 220VAC lights and control motorized valves with 24VDC power. Input 1 with the required power source is for relay channels 1, 2 and 3, which can carry a maximum 15 Amp load. Input 2 with the required power source is for relay channels 4 and 5, which can carry a maximum 10 Amp load. Each relay channel uses HELTUN Advanced Zero-Cross Technology to deliver greatly increased longevity & reliability of your system.

Know How Much Energy You Use

The HELTUN built-in Power Consumption System precisely monitors how much energy you used during any particular day, week, or month. Do your current light switches do that? Just specify the consumption of the load in watts for each relay channel and the Relay Switch quinto logic will calculate total consumption relative to the time since the output was in the ‘ON’ state. We have also designed the circuitry so it draws almost zero watts to power itself when in standby mode. This saves you energy and money especially if your home is equipped with many HELTUN products.

Touch Control

The panel has five touch-sensitive control ‘buttons’ that react to even the lightest touch. Each button has a two-colour backlight, red or blue, to indicate its state. 15 different brightness levels can be manually configured for each button backlight by setting the value in the parameter settings, or in automatic mode. In auto mode, an internal ambient light sensor adjusts button backlight brightness automatically to room lighting conditions. This makes each control state easy to see even on bright sunny days, plus it will prevent your eyes from being overpowered at night.

Powerfully Customizable

1) Each of the five buttons can control any relay output. Also, the output of 1-5 relays can be controlled by each button. 2) There are five modes that can be configured for each button: Invert State - when button is touched: turn ON if OFF, or turn OFF if ON. Momentary - switch ON when button is touched, switch OFF when released. Momentary Reversed - switch OFF when touched, switch ON when released. Switch ON Only - when touched. Switch OFF Only - when touched.3) Relay outputs can be controlled by a timer. For example, pressing a button can switch a relay ON, and after a specified time it can automatically be switched OFF (or vice-versa: OFF, then ON). This function can be used to open or close garage doors, gates, blinds, curtains, locks, etc., and then return them to their previous state with no additional input.4) Each touch-sensitive ‘button’, its backlight, and associated relay output, can be independently managed by a Z-Wave controller or associated device - and can run scenes with the backlight indicating scene state or device status.

Motorized Device Controls

The HELTUN Touch Panel Switch does a lot more than just control house lights. You can use it to control motorized blinds, curtains, garage doors, driveway gates, and electric locks. You have full control over programming different buttons for specific functions. For example, you can designate the top left button to raise the living room blinds, and the bottom left button to lower them. In this mode, if the blinds are rising and you then touch the down button, the system will automatically cancel the UP command and initiate a DOWN command, or vice-versa. The system also calculates the position of the blinds when fully opened or closed and automatically stops the motor when it reaches the UP or DOWN limit. If you have installed a door sensor - as on a garage door - you can associate that sensor with the button backlight to indicate the actual UP or DOWN state of the door.

Schedules & Scenarios

Using the internal timekeeping of the HELTUN Touch Panel Switch, you can create schedules for some devices. For example: Open the blinds at 7:00AM and close them at 10:00PM. Switch on the porch light at 7:00PM and turn it off at 1:00AM. Scenarios can also be created that allow connected devices to be triggered by a sensor. For example: If the ambient light sensor detects less then 200 lux, connected house lights would switch to ON. If the internal temperature sensor measured less than 23°C, the connected heating system could be switched on. The possibilities for adding convenience and comfort are endless and limited only by the creativity of the owner or installer of the HELTUN Touch Panel Switch.

Control Up to 100 Z-Wave Devices

The HELTUN Touch Panel Switch quinto has 20 association groups, with 5 controlled devices for each group. “Basic Set Devices” (On/Off), or “Multilevel Set Devices” (Variable Position), can be associated to each group. This enables it to operate within the most demanding smart home systems.

Easy Installation

HELTUN Touch Panel Switches can be easily installed into any standard electrical junction box (square or round). Installation must only be performed by someone trained in handling high voltage electrical systems.

Technical Details

  • Front frame dimensions: 89x89x9mm
  • Back dimensions: 53x53x28mm
  • Material: Flame retardant plastic, tempered glass
  • 4 frame colors: Silver, Chrome, Black, White
  • 6 glass colors: White, Black, Yellow, Green, Red, Blue
  • 5 sensitive capacitive touch buttons
  • Red and Blue color LED back light for each button
  • 3 levels adjustable brightness for back light
  • Operating temperature: -10°C – +60°C
  • Power supply: 100VAC – 250VAC, 50Hz/60Hz
  • Power consumption: 1.5W
  • 5 relays with resistive load up to 5A each
  • 2 independent relays input, dry contact type
  • Relay life time: 100.000 switches
  • Internal ambient brightness sensor
  • Internal temperature sensor
  • Measurement range: -40°C to +125°C
  • Accuracy: ±0.5°C
  • Internal humidity sensor
  • Measurement range: 0 – 80%RH
  • Accuracy: ±3.0%RH
  • IP class: IP21
  • Z-Wave Frequency: All countries
  • Z-Wave SDK: V7.11.1
  • Z-Wave Plus module: ZGM130S
Included in this product:
  • Z-Wave Plus
Learn more:
We ship worldwide... simply add products to cart to see real time shipping prices & delivery times based on weight and location.

If you’re not 100% satisfied with your purchase you can return any unused products within 365 days.

If you have problems with a new purchase, our support team will work with you to resolve. And if you still have any concerns you can return it within 14 days for replacement or refund.