5 Star Service
Eutonomy Adapter DIN for Fibaro Single Switch 2 FGS-213 with push-buttons is used to install the Fibaro Single Switch 2 FGS-213 module on DIN TH35/TS35 type rail in the electrical switchboard.
euFIX. DIN TH35 rail adapters for Fibaro modules
Eutonomy euFIX are adapters for Fibaro modules which help you to install and maintain system which require mounting Fibaro modules inside electric rack.
Eutonomy euFIX are available for the following Fibaro modules: FGD-212, FGR-222, FGS-212, FGS-213, FGS-222 and FGS-223. All euFIX adapters are available in 2 versions: with or without buttons.
The Eutonomy euFIX S213 Adapter is used to install the Fibaro Single Switch 2 FGS-213 module (sold separately) on DIN TH35/TS35 type rail in the electrical switchboard.
The euFIX S213 Adapter consists of the case and the base board, where the FGS-213 module is mounted. The dimensions of the case are appropriate for a standard DIN TH35/TS35 type rail.
The base board contains a set of screw terminals, where all the wires (power supply, input and output signals, control push-buttons) can be safely connected. The front panel of the case contains two diagnostics micro-push-buttons S1 & S2, which can be used to control the module, to register the module within the Z-Wave system or to remove it from the system without opening the adapter's case.
The simplified S213NP variation (available separately) does not have the micro-push-buttons.