{"title":"Brands - Ecolink","description":"\u003cp\u003eEcolink is a US maker of security and home automation sensors. Its Z-Wave range includes door and window sensors, motion sensors, flood and freeze sensors, switch actuators, a siren and a garage door controller.\u003c\/p\u003e\n\u003cp\u003eThe Ecolink products here are US versions. They use the US Z-Wave frequency (908.42 MHz), so they suit US homes and US Z-Wave controllers.\u003c\/p\u003e","products":[{"product_id":"ecolink-smart-thermostat-z-wave-plus-tbz500-us","title":"Ecolink Smart Thermostat, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink TBZ500 is a programmable Z-Wave Plus thermostat for standard US low-voltage (24 V AC) heating and cooling systems, including heat pumps. Set it at the wall, or let your Z-Wave hub or alarm panel change modes and set points as part of schedules and scenes.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with conventional gas or electric systems (up to 2 stages of heat and 2 of cooling) and heat pumps (up to 3 stages of heat and 2 of cooling)\u003c\/li\u003e\n\u003cli\u003eRuns on 4 x AA batteries, so no C wire is needed; can be hardwired to 24 V AC where R and C wires are available\u003c\/li\u003e\n\u003cli\u003eBacklit LCD with a short text message bar and four touch keys\u003c\/li\u003e\n\u003cli\u003eModes: Off, Auto, Heat and Cool; fan On or Auto; display in °F or °C\u003c\/li\u003e\n\u003cli\u003eHeat pump support with O or B reversing valve output and selectable emergency heat\u003c\/li\u003e\n\u003cli\u003eAdjustable compressor short-cycle protection (5 minutes by default)\u003c\/li\u003e\n\u003cli\u003eS2 security and firmware updates over Z-Wave\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: TBZ500 (white)\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz, S2 security\u003c\/li\u003e\n\u003cli\u003ePower: 4 x AA batteries (included), Ecolink quotes around 24 months; or 24 V AC with R and C wires\u003c\/li\u003e\n\u003cli\u003eTerminals: C, RC, RH, W1, W2\/O, Y1, Y2, G\u003c\/li\u003e\n\u003cli\u003eFor 12 V or 24 V AC low-voltage HVAC systems only; not for line-voltage (120 V or 240 V) heating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately. Ecolink also lists it as tested with several US alarm panels with Z-Wave thermostat control, such as Qolsys IQ and 2GIG panels.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eThermostat, wall plate, 2 screws and anchors, 4 x AA batteries, DSK label and installation manual.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"White","offer_id":67255639703667,"sku":"US-ECTBZ500W","price":113.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECTBZ500x_media-White-010.jpg?v=1795056996"},{"product_id":"ecolink-switch-actuator-double-rocker-z-wave-plus-ddls2-us","title":"Ecolink Smart Switch Actuator, Double Rocker, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink DDLS2 is a battery-powered Z-Wave Plus switch actuator that fits over an existing US rocker light switch. A small motor moves the switch itself, so there is no mains wiring to touch: take off the wall plate, screw the unit over the switch and add it to your Z-Wave hub. The light can still be switched by hand.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits over a standard double (two-gang) rocker switch using the existing wall plate screws\u003c\/li\u003e\n\u003cli\u003eNo electrician or neutral wire needed; the original switch stays in place\u003c\/li\u003e\n\u003cli\u003eSwitch by hand, from your Z-Wave hub, or in schedules and scenes\u003c\/li\u003e\n\u003cli\u003e4 x AA batteries (included), Ecolink quotes around 1 year of battery life\u003c\/li\u003e\n\u003cli\u003eReports on\/off state to your hub and supports Z-Wave associations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: DDLS2-ZWAVE5\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eFor lighting circuits up to 120 V switched by a standard rocker switch\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 49°C (32°F to 120°F), 5% to 95% humidity non-condensing\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eSwitch actuator, 4 x AA batteries and manual.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255640948851,"sku":"US-ECDDLS2ZWAVE5","price":88.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECDDLS2ZWAVE5_media-001.jpg?v=1795057015"},{"product_id":"ecolink-chime-siren-z-wave-plus-700-iszw7-us","title":"Ecolink Chime and Siren, Z-Wave Plus 700 Series","description":"\u003cp\u003eThe Ecolink ISZW7-ECO is a plug-in indoor siren and chime for US Z-Wave systems. Your hub can sound a loud alarm when a sensor is triggered, or play a gentler chime when a door opens or someone rings the bell.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLoud 105 dB siren for alarms\u003c\/li\u003e\n\u003cli\u003eBuilt-in chime and alarm sounds, plus your own sounds loaded from a micro SD card (mono .wav files, card not included)\u003c\/li\u003e\n\u003cli\u003eAdjustable volume for chimes; emergency sounds always play at full volume\u003c\/li\u003e\n\u003cli\u003ePlugs into a standard US outlet, with a built-in rechargeable battery that keeps it working for up to 24 hours in a power cut\u003c\/li\u003e\n\u003cli\u003eGreen and red status LEDs and a test button\u003c\/li\u003e\n\u003cli\u003eS2 security and SmartStart for quick, secure set-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: ISZW7-ECO\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus V2 (700 series), US frequency 908.42 MHz, S2 security, SmartStart\u003c\/li\u003e\n\u003cli\u003ePower: 120 V AC 60 Hz plug-in; internal lithium-ion backup battery (not user-replaceable), up to 24 hours\u003c\/li\u003e\n\u003cli\u003eSound level: 105 dB\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 49°C (32°F to 120°F)\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eChime and siren, installation guide and accessory pack.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz) and 120 V AC 60 Hz mains. It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255641538675,"sku":"US-ECISZW7ECO","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECISZW7ECO_media-001_eea33b47-f8a0-4320-8fb6-059e327d00dc.jpg?v=1795057033"},{"product_id":"ecolink-pet-immune-motion-sensor-z-wave-plus-pirzwave25-us","title":"Ecolink Pet-Immune Motion Sensor, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink PIRZWAVE2.5-ECO is a battery-powered passive infrared motion sensor for US Z-Wave systems. It tells your hub when someone moves through a room, so you can switch on lights, send an alert or trigger your alarm, while ignoring pets up to about 25 kg (55 lb) in pet-immune mode.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWide-angle coverage of roughly 9 m deep by 15 m wide (30 x 50 ft)\u003c\/li\u003e\n\u003cli\u003eSelectable pet immunity for animals up to about 25 kg (55 lb), or maximum sensitivity\u003c\/li\u003e\n\u003cli\u003eBattery powered, no wiring; Ecolink quotes up to 5 years battery life\u003c\/li\u003e\n\u003cli\u003eCorner or flat wall mounting with the bracket, screws or adhesive pads supplied\u003c\/li\u003e\n\u003cli\u003eTamper alert if the cover is removed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PIRZWAVE2.5-ECO\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003ePower: 1 x CR123A lithium battery (included)\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eMotion sensor, mounting bracket, 4 screws, 2 jumpers, battery and 3 adhesive pads.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255642095731,"sku":"US-ECPIRZWAVE25ECO","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECPIRZWAVE25ECO_media-001_5916cf3e-b65b-41d3-bbbc-30214be3d27f.jpg?v=1795057050"},{"product_id":"ecolink-switch-actuator-single-toggle-z-wave-plus-stls2-us","title":"Ecolink Smart Switch Actuator, Single Toggle, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink STLS2 is a battery-powered Z-Wave Plus switch actuator that fits over an existing US toggle light switch. A small motor moves the switch itself, so there is no mains wiring to touch: take off the wall plate, screw the unit over the switch and add it to your Z-Wave hub. The light can still be switched by hand.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits over a standard single-gang toggle switch using the existing wall plate screws\u003c\/li\u003e\n\u003cli\u003eNo electrician or neutral wire needed; the original switch stays in place\u003c\/li\u003e\n\u003cli\u003eSwitch by hand, from your Z-Wave hub, or in schedules and scenes\u003c\/li\u003e\n\u003cli\u003e2 x AA batteries (included), Ecolink quotes around 1 year of battery life\u003c\/li\u003e\n\u003cli\u003eReports on\/off state to your hub and supports Z-Wave associations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: STLS2-ZWAVE5\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eFor lighting circuits up to 120 V switched by a standard toggle switch\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 49°C (32°F to 120°F), 5% to 95% humidity non-condensing\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eSwitch actuator, installation hardware, 2 x AA batteries and manual.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255642751091,"sku":"US-ECSTLS2ZWAVE5","price":45.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/Toggle-Switch.jpg?v=1795057071"},{"product_id":"ecolink-switch-actuator-single-rocker-z-wave-plus-sdls2-us","title":"Ecolink Smart Switch Actuator, Single Rocker, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink SDLS2 is a battery-powered Z-Wave Plus switch actuator that fits over an existing US rocker light switch. A small motor moves the switch itself, so there is no mains wiring to touch: take off the wall plate, screw the unit over the switch and add it to your Z-Wave hub. The light can still be switched by hand.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits over a standard single-gang rocker switch using the existing wall plate screws\u003c\/li\u003e\n\u003cli\u003eNo electrician or neutral wire needed; the original switch stays in place\u003c\/li\u003e\n\u003cli\u003eSwitch by hand, from your Z-Wave hub, or in schedules and scenes\u003c\/li\u003e\n\u003cli\u003e2 x AA batteries (included), Ecolink quotes around 1 year of battery life\u003c\/li\u003e\n\u003cli\u003eReports on\/off state to your hub and supports Z-Wave associations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: SDLS2-ZWAVE5\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eFor lighting circuits up to 120 V switched by a standard rocker switch\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 49°C (32°F to 120°F), 5% to 95% humidity non-condensing\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eSwitch actuator, 2 x AA batteries and manual.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255643439219,"sku":"US-ECSDLS2ZWAVE5","price":45.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/Ecolink_Switch_Decora-_Single-1.jpg?v=1795057087"},{"product_id":"ecolink-switch-actuator-double-toggle-z-wave-plus-dtls2-us","title":"Ecolink Smart Switch Actuator, Double Toggle, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink DTLS2 is a battery-powered Z-Wave Plus switch actuator that fits over an existing US toggle light switch. A small motor moves the switch itself, so there is no mains wiring to touch: take off the wall plate, screw the unit over the switch and add it to your Z-Wave hub. The light can still be switched by hand.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits over a standard double (two-gang) toggle switch using the existing wall plate screws\u003c\/li\u003e\n\u003cli\u003eNo electrician or neutral wire needed; the original switch stays in place\u003c\/li\u003e\n\u003cli\u003eSwitch by hand, from your Z-Wave hub, or in schedules and scenes\u003c\/li\u003e\n\u003cli\u003e4 x AA batteries (included), Ecolink quotes around 1 year of battery life\u003c\/li\u003e\n\u003cli\u003eReports on\/off state to your hub and supports Z-Wave associations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: DTLS2-ZWAVE5\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eFor lighting circuits up to 120 V switched by a standard toggle switch\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 49°C (32°F to 120°F), 5% to 95% humidity non-condensing\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eSwitch actuator, installation hardware, 4 x AA batteries and manual.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255644913779,"sku":"US-ECDTLS2ZWAVE5","price":88.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECDTLS2ZWAVE5_media-001_c21f3584-8ea3-480c-94d6-5337080c0c20.jpg?v=1795057104"},{"product_id":"ecolink-garage-door-tilt-sensor-z-wave-plus-tilt-zwave5-us","title":"Ecolink Garage Door Tilt Sensor, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink tilt sensor fixes to the top panel of a sectional garage door and reports to your Z-Wave hub whether the door is open or closed. Use it to get an alert when the door is left open, close it at night with a garage door controller, or check it from your phone.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDetects the door tilting as it opens, so there is no magnet to align\u003c\/li\u003e\n\u003cli\u003eFixes with the double-sided tape supplied; can be mounted either way up\u003c\/li\u003e\n\u003cli\u003eTamper alert if the cover is removed\u003c\/li\u003e\n\u003cli\u003eBattery powered, no wiring; Ecolink quotes around 5 years from one CR123A\u003c\/li\u003e\n\u003cli\u003eS2 security\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: TILT-ZWAVE5\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz, S2 security\u003c\/li\u003e\n\u003cli\u003ePower: 1 x CR123A lithium battery (included)\u003c\/li\u003e\n\u003cli\u003eRange: up to 30 m (100 ft) line of sight\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 49°C (32°F to 120°F), 5% to 95% humidity non-condensing\u003c\/li\u003e\n\u003cli\u003eIndoor use only (inside the garage)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately. Ring Alarm users need a Ring Alarm Base Station.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eTilt sensor, CR123A battery, installation guide and accessory pack.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255645438067,"sku":"US-ECTILTZWAVE5ECO","price":42.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECTILTZWAVE25ECO_media-001_3c0d5ba2-a964-48c6-a821-e6f1df4dbea1.jpg?v=1795057121"},{"product_id":"ecolink-flood-freeze-sensor-probe-z-wave-plus-flf-zwave5-us","title":"Ecolink Flood and Freeze Sensor with Probe, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink FLF-ZWAVE5 warns your Z-Wave hub about two of the costliest problems in a home: water on the floor and pipes at risk of freezing. Place the probe where a leak would show first, such as beside a water heater, washing machine or sump pump, and get an alert within seconds.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReports a leak within about 2 seconds of water reaching the probe\u003c\/li\u003e\n\u003cli\u003eFreeze warning when the temperature falls to about 5°C (41°F)\u003c\/li\u003e\n\u003cli\u003eExternal probe on a lead (about 90 cm \/ 36 in) for tight spots behind appliances\u003c\/li\u003e\n\u003cli\u003eTamper alert if the cover is removed\u003c\/li\u003e\n\u003cli\u003eBattery powered; Ecolink quotes about 5 years from one CR123A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: FLF-ZWAVE5\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003ePower: 1 x CR123A lithium battery (included)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 49°C (32°F to 120°F), 5% to 95% humidity non-condensing\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately. Pair it with a Z-Wave water valve if you want the hub to shut off the supply automatically.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eFlood and freeze sensor with probe, CR123A battery, installation guide and accessory pack.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255646519411,"sku":"US-ECFLFZWAVE5ECO","price":40.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECFLFZWAVE5ECO_media-001_39dd0c2e-d86b-43b6-a21f-7365f9c76c12.jpg?v=1795057146"},{"product_id":"ecolink-firefighter-smoke-co-alarm-listener-z-wave-plus-ff-zwave5-us","title":"Ecolink FireFighter Smoke and CO Alarm Listener, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink FireFighter adds your existing smoke and carbon monoxide alarms to your Z-Wave system without replacing them. Mounted next to an alarm, it listens for the standard US alarm patterns and tells your hub when the alarm sounds, so you can get a notification when you are away.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRecognises the Temporal 3 smoke alarm pattern and the Temporal 4 CO alarm pattern used by UL-listed alarms\u003c\/li\u003e\n\u003cli\u003eReports separate smoke and CO events, and when the alarm stops\u003c\/li\u003e\n\u003cli\u003eNo wiring and nothing to change on the existing alarm\u003c\/li\u003e\n\u003cli\u003eTamper alert if the cover is removed\u003c\/li\u003e\n\u003cli\u003eBattery powered; Ecolink quotes about 5 years from one CR123A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant\u003c\/h2\u003e\n\u003cp\u003eThe FireFighter does not detect smoke, heat or CO itself. It relies on hearing a working UL-listed alarm mounted within 15 cm (6 in), with its microphone facing the alarm. Keep your smoke and CO alarms tested and maintained. Ecolink notes that CO detection is not guaranteed in the default mode; an enhanced CO mode is available at the cost of shorter battery life.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: FF-ZWAVE5-ECO\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003ePower: 1 x 3 V CR123A lithium battery (included)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 49°C (32°F to 120°F), 5% to 95% humidity non-condensing\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eFireFighter sensor, CR123A battery, installation guide and accessory pack.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255647076467,"sku":"US-ECFFZWAVE5ECO","price":48.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECFFZWAVE5ECO_media-001_f9d22f55-1d20-4986-aa0c-4c9a84412126.jpg?v=1795057165"},{"product_id":"ecolink-door-window-sensor-z-wave-plus-dwzwave25-us","title":"Ecolink Door\/Window Sensor, Z-Wave Plus","description":"\u003cp\u003eThe Ecolink DWZWAVE2.5-ECO is a compact magnetic contact sensor that tells your Z-Wave hub when a door or window opens or closes. Use it for security alerts, to turn on a light when you walk in, or to check that everything is shut before bed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRare-earth magnet works across a gap of up to 16 mm (5\/8 in)\u003c\/li\u003e\n\u003cli\u003eWhite and brown covers supplied to suit the frame\u003c\/li\u003e\n\u003cli\u003eScrew or adhesive fixing with the bracket provided\u003c\/li\u003e\n\u003cli\u003eBattery powered, no wiring; Ecolink quotes about 3 years battery life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: DWZWAVE2.5-ECO\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003ePower: 1 x 3 V CR123A lithium battery\u003c\/li\u003e\n\u003cli\u003eRange: up to 30 m (100 ft) line of sight\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 49°C (32°F to 120°F)\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eSensor, white and brown covers, mounting bracket with 2 screws, adhesive tape, and magnet with 2 screws.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255648485491,"sku":"US-ECDWZWAVE25ECO","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECDWZWAVE25ECO_media-001_15308535-d5d5-43e9-b7eb-694f3d3fb899.jpg?v=1795057182"},{"product_id":"ecolink-garage-door-controller-z-wave-gdzw7-us","title":"Ecolink Z-Wave Garage Door Controller","description":"\u003cp\u003eThe Ecolink GDZW7 lets your Z-Wave hub or alarm panel open and close an existing garage door opener and report whether the door is open or closed. It comes with a wireless door sensor, so you always see the real position of the door, not just the last command sent.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConnects to the push-button terminals of most garage door openers, or pairs wirelessly with Chamberlain Security+ and Security+ 2.0 openers\u003c\/li\u003e\n\u003cli\u003eWireless tilt sensor included (runs on a CR123A battery)\u003c\/li\u003e\n\u003cli\u003eWarning light flashes and a beeper sounds while the door is closed from the hub\u003c\/li\u003e\n\u003cli\u003eSmartStart for quick set-up by scanning the QR code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: GDZW7 (newer version that replaces the GDZW7-ECO)\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus, US frequency 908.42 MHz, SmartStart\u003c\/li\u003e\n\u003cli\u003eOther radio frequencies: 310, 315, 345 and 390 MHz (opener remotes and tilt sensor)\u003c\/li\u003e\n\u003cli\u003ePower: 12 V DC 1 A plug-in adapter (included)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20°C to 60°C (-4°F to 140°F)\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately. Remote closing should only be used on openers with working safety sensors (photo eyes).\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eGarage door controller, wireless tilt sensor, AC\/DC power adapter, mounting bracket, screws, bolts and wall anchors, double-sided tape and quick start guide.\u003c\/p\u003e\n\u003cp\u003eThis is the US version, made for the US Z-Wave frequency (908.42 MHz) and 120 V AC 60 Hz mains. It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Ecolink","offers":[{"title":"Default Title","offer_id":67255649599603,"sku":"US-ECGDZW7LR","price":114.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/ECGDZW7LR_media-001.jpg?v=1795057200"}],"url":"https:\/\/www.vesternet.com\/fr\/collections\/brands-ecolink.oembed","provider":"Vesternet","version":"1.0","type":"link"}