Are there any DIN Rail Mountable Z-Wave devices available?


Are there any DIN Rail Mountable Z-Wave devices available?


Unfortunately this appears to be an area that is lacking with available Z-Wave devices. This is mainly because the devices are really designed to be installed "at the location" where they are required, as opposed to "home-run" back to an equipment enclosure.

Note: Qubino has now released the first DIN mountable Z-Wave devices:


As usual with most things Home Automation related, somebody somewhere has already thought about and solved the problem!

A CamdenBoss CMEB Module Box is just wide enough to hold a Fibaro Relay Insert 1 * 3 KW, a Fibaro Relay Insert 2 * 1.5 KW, or a Fibaro Universal Dimmer 500W

Note however that the plastic cover does not fit though as the Fibaro modules are a few mm wider than the module box itself (this does not effect the module box mounting in the DIN Rail mount next to another one).

An extension piece is also available that clips to the module box and with this fitted two Fibaro modules will fit side by side and the cover on the extension piece will fit correctly, enclosing both Fibaro modules.

Z-Wave DIN Rail Mount


This KB article was inspired by a post from the Domitica Europe Forum.

Updated: 18/03/2016