Z-Wave Popp Flood / Water Leakage Sensor

by Popp
  |  
Check compatibility
£40.00
SKU POPE700052

In Stock

The Popp Flood Sensor is a universal Z-Wave compatible flood sensor indicating water leakage in Smart Homes.

  • In case of a water leackage LED starts blinking and the device will send an alarm message to a central Z-Wave controller
  • Receive a message on your smartphone in case of water leackage
  • Act immediately and prevent damages caused by water even when you are not at home
  • Group it with other smart devices like POPP Flow Stop Controller trough Z-Wave controller and turn off the water automatically
  • Battery powered (1 x CR14250)
  • Easy Installation
  • IP44 protected - suitable for outdoor usage
  • Z-Wave Plus Certified

A broken hose at the washing machine or a leaking pipe at the water tap. Even if there is only a small leackage it can cause a big damage. The POPP Water Leackage Sensor protects you from all these scenarios. As soon as the device detects water at his probes an acoustic alarm is triggered. Additionally, the LED starts blinking and the alarm signal is sent to the Z-Wave gateway. Because of that, you receive a message on your smartphone and you can act immediately even when you are not at home. Therefore you can prevent high damages caused by water.

Connected to other smart devices like the POPP Flow Stop you can even turn off the water automatically, if there is a leakage in a water pipe.

Installation

The POPP Water Leakage Sensor can be placed underneath a washing machine or a sink. If there is not enough space for the main device you can use the included sensor cable with extra wall mounting plate. The sensor is water resistant and floats (protection class IP44). Thus, it is also suitable for outdoor use.

The recommended way to install the device is to mount the mounting base on the lower part of the wall closed to the point of water leakage control. When mounted on a wall the device can be attached using the double sides tape on the backside of the device. However it is recommended to screw the device holder to the wall.

Features:

  • Sensor alerts in case of a water leakage
  • Acoustic and optical alarm through a LED
  • Probes in the bottom of the device and on the probe extension cable
  • Waterproof (IP44)
  • Power supply: Battery (CR2-3V)
  • Z-Wave Plus
  • Dimensions: 66 x 66 x 23 mm

Z-Wave Plus

The Z-Wave POPP Flood / Water Leakage Sensor is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information