{"title":"Brands - Jasco","description":"\u003cp\u003eJasco is a US maker of smart lighting controls. Its Z-Wave range, including the JascoPro line for installers, covers in-wall switches, dimmers, plug-in switches and sensors.\u003c\/p\u003e\n\u003cp\u003eThe Jasco products here are US versions. They use the US Z-Wave frequency (908.42 MHz) and, where wired, 120 V AC 60 Hz mains, so they suit US homes and US Z-Wave controllers.\u003c\/p\u003e","products":[{"product_id":"jasco-in-wall-smart-toggle-switch-z-wave-plus-46563-us","title":"Jasco In-Wall Smart Toggle Switch, Z-Wave Plus","description":"\u003cp\u003eThe Jasco 46563 is a Z-Wave Plus on\/off toggle switch that replaces a standard US single-pole light switch. Flip the toggle to switch the light by hand, or control it from your Z-Wave hub with schedules, scenes and automations.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSwitches LED, CFL, halogen and incandescent lighting, plus small motors and fans\u003c\/li\u003e\n\u003cli\u003eQuickFit housing is shallower than older Jasco switches, leaving more room in the wall box\u003c\/li\u003e\n\u003cli\u003eSimpleWire terminals: line and load can be connected either way round\u003c\/li\u003e\n\u003cli\u003eBlue LED locator light on the toggle\u003c\/li\u003e\n\u003cli\u003eWorks with up to four Jasco or Enbrighten add-on switches for 3-way to 6-way control (add-ons sold separately)\u003c\/li\u003e\n\u003cli\u003eMains powered, so it also repeats Z-Wave signals to strengthen your mesh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 46563 (ZW4009)\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus (500 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eSupply: 120 V AC, 60 Hz; neutral wire required\u003c\/li\u003e\n\u003cli\u003eMaximum load: 960 W incandescent, 1\/2 HP motor or 1800 W (15 A) resistive\u003c\/li\u003e\n\u003cli\u003eRange: up to 150 ft (45 m) line of sight to the nearest Z-Wave device\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003cp\u003eInstallation must be carried out by a qualified electrician in line with local wiring codes. Wallplate not included; it takes a standard single-gang toggle wallplate.\u003c\/p\u003e\n\u003cp\u003eThis is the US version for the US Z-Wave frequency (908.42 MHz) and 120 V AC 60 Hz mains. It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Jasco","offers":[{"title":"Default Title","offer_id":67252591427699,"sku":"US-JA46563","price":48.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/JA46563_media-001_5d26d9e0-c2b2-4802-b274-e460e7e43352.jpg?v=1795047001"},{"product_id":"jasco-slim-door-window-sensor-z-wave-plus-700-52249-us","title":"Jasco Slim Smart Door\/Window Sensor, Z-Wave Plus 700 Series","description":"\u003cp\u003eThe Jasco 52249 is a slim, battery-powered contact sensor for doors and windows. When the magnet moves away from the sensor body it reports open or closed to your Z-Wave hub, so you can get an alert, turn on a light or arm a scene.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLow-profile body that fits narrow frames and sliding windows\u003c\/li\u003e\n\u003cli\u003eTwo internal reed contacts, so the magnet can sit beside or above the sensor\u003c\/li\u003e\n\u003cli\u003eTwo magnet sizes supplied for different gaps\u003c\/li\u003e\n\u003cli\u003eBuilt-in tamper switch\u003c\/li\u003e\n\u003cli\u003ePaintable top cover\u003c\/li\u003e\n\u003cli\u003eFixes with the double-sided tape provided, no drilling needed\u003c\/li\u003e\n\u003cli\u003eS2 security and SmartStart for quick, secure inclusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 52249 (ZW6308)\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus V2 (700 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 x CR2450 (included)\u003c\/li\u003e\n\u003cli\u003eRange: up to 150 ft (45 m) line of sight to the nearest Z-Wave device\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 40°C\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eSensor, two magnets, CR2450 battery and mounting tape.\u003c\/p\u003e\n\u003cp\u003eThis is the US version for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Jasco","offers":[{"title":"Default Title","offer_id":67252592115827,"sku":"US-JA52249","price":42.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/JA52249_media-001.jpg?v=1795047048"},{"product_id":"jascopro-in-wall-smart-toggle-switch-z-wave-800-76598-us","title":"JascoPro In-Wall Smart Toggle Switch, Z-Wave Plus 800 Series","description":"\u003cp\u003eThe JascoPro 76598 is an 800 series Z-Wave on\/off toggle switch for US single-gang boxes. Use the toggle by hand as normal, or control the light from your Z-Wave hub with schedules, scenes and automations.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e800 series Z-Wave chip with S2 security and SmartStart\u003c\/li\u003e\n\u003cli\u003eSwitches LED, CFL, halogen and incandescent lighting, plus small motors\u003c\/li\u003e\n\u003cli\u003eQuickFit housing, about 20% smaller than standard, with no break-off tabs\u003c\/li\u003e\n\u003cli\u003eSimpleWire terminals: line and load can be connected either way round, with an offset dual ground terminal\u003c\/li\u003e\n\u003cli\u003eBlue LED backlight on the toggle\u003c\/li\u003e\n\u003cli\u003eWorks with up to four JascoPro add-on switches for 3-way to 6-way control (sold separately)\u003c\/li\u003e\n\u003cli\u003eMains powered, so it also repeats Z-Wave signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 76598 (ZWN4016)\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave 800 series, US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eSupply: 120 V AC, 60 Hz; neutral wire required\u003c\/li\u003e\n\u003cli\u003eMaximum load: 960 W incandescent, 1\/2 HP motor or 1800 W (15 A) resistive\u003c\/li\u003e\n\u003cli\u003eRange: up to 150 ft (45 m) line of sight to the nearest Z-Wave device\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 40°C\u003c\/li\u003e\n\u003cli\u003eDimensions: 105mm x 67mm x 44mm (4.13 x 2.63 x 1.75 in)\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited (Jasco)\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003cp\u003eInstallation must be carried out by a qualified electrician in line with local wiring codes. Wallplate not included; it takes a standard single-gang toggle wallplate.\u003c\/p\u003e\n\u003cp\u003eThis is the US version for the US Z-Wave frequency (908.42 MHz) and 120 V AC 60 Hz mains. It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Jasco Pro","offers":[{"title":"Default Title","offer_id":67252592148595,"sku":"US-JA76598","price":45.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/JA76598_media-001_17adbf63-0e27-4df8-b17b-54bae7fd9970.jpg?v=1795047049"},{"product_id":"jascopro-in-wall-smart-toggle-dimmer-z-wave-700-59384-us","title":"JascoPro In-Wall Smart Toggle Dimmer, Z-Wave Plus 700 Series","description":"\u003cp\u003eThe JascoPro 59384 is a 700 series Z-Wave toggle dimmer for US single-gang boxes. Tap the toggle up or down to dim by hand, or set levels from your Z-Wave hub with schedules, scenes and automations.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZ-Wave Plus V2 (700 series) with S2 security and SmartStart\u003c\/li\u003e\n\u003cli\u003eDims dimmable LED, CFL, halogen and incandescent lighting\u003c\/li\u003e\n\u003cli\u003eMulti-colour LED indicator on the toggle\u003c\/li\u003e\n\u003cli\u003eQuickFit housing, about 20% smaller than standard\u003c\/li\u003e\n\u003cli\u003eSimpleWire terminals: line and load can be connected either way round\u003c\/li\u003e\n\u003cli\u003eWorks with up to four JascoPro add-on switches for 3-way to 6-way control (sold separately)\u003c\/li\u003e\n\u003cli\u003eMains powered, so it also repeats Z-Wave signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 59384\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus V2 (700 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eSupply: 120 V AC, 60 Hz; neutral wire required\u003c\/li\u003e\n\u003cli\u003eIncandescent: 600 W single gang, 500 W 2-gang, 400 W 3-gang\u003c\/li\u003e\n\u003cli\u003eDimmable LED\/CFL: 360 W (3 A)\u003c\/li\u003e\n\u003cli\u003eRange: up to 150 ft (45 m) line of sight to the nearest Z-Wave device\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 40°C\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited (Jasco)\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003cp\u003eInstallation must be carried out by a qualified electrician in line with local wiring codes. Wallplate not included; it takes a standard single-gang toggle wallplate.\u003c\/p\u003e\n\u003cp\u003eThis is the US version for the US Z-Wave frequency (908.42 MHz) and 120 V AC 60 Hz mains. It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Jasco Pro","offers":[{"title":"Default Title","offer_id":67252592902259,"sku":"US-JA59384","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/JA59384_media-001_269f9605-709b-4fee-972d-b4bad83af1c9.jpg?v=1795047104"},{"product_id":"jascopro-in-wall-smart-paddle-switch-z-wave-800-76596-us","title":"JascoPro In-Wall Smart Paddle Switch, Z-Wave Plus 800 Series","description":"\u003cp\u003eThe JascoPro 76596 is an 800 series Z-Wave on\/off paddle (rocker) switch for US single-gang boxes. Press the paddle to switch the light by hand, or control it from your Z-Wave hub with schedules, scenes and automations.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e800 series Z-Wave chip with S2 security and SmartStart\u003c\/li\u003e\n\u003cli\u003eSwitches LED, CFL, halogen and incandescent lighting, plus small motors\u003c\/li\u003e\n\u003cli\u003eWhite and light almond paddles included\u003c\/li\u003e\n\u003cli\u003eQuickFit housing, about 20% smaller than standard\u003c\/li\u003e\n\u003cli\u003eSimpleWire terminals: line and load can be connected either way round, with an offset dual ground terminal\u003c\/li\u003e\n\u003cli\u003eWorks with JascoPro add-on switches for multi-way control (sold separately)\u003c\/li\u003e\n\u003cli\u003eMains powered, so it also repeats Z-Wave signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 76596 (ZWN4015)\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave 800 series, US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eSupply: 125 V AC, 60 Hz; neutral wire required\u003c\/li\u003e\n\u003cli\u003eMaximum load: 1250 W incandescent, 1\/2 HP motor or 1875 W (15 A) resistive\u003c\/li\u003e\n\u003cli\u003eRange: up to 150 ft (45 m) line of sight to the nearest Z-Wave device\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 40°C\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited (Jasco)\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003cp\u003eInstallation must be carried out by a qualified electrician in line with local wiring codes. Wallplate not included; it takes a standard single-gang Decora-style plate.\u003c\/p\u003e\n\u003cp\u003eThis is the US version for the US Z-Wave frequency (908.42 MHz) and 120 V AC 60 Hz mains. It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Jasco Pro","offers":[{"title":"Default Title","offer_id":67252592935027,"sku":"US-JA76596","price":53.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/JA76596_media-001_d0257005-cac6-4857-8971-ab68d76c4728.jpg?v=1795047104"},{"product_id":"jascopro-in-wall-smart-paddle-dimmer-z-wave-700-59383-us","title":"JascoPro In-Wall Smart Paddle Dimmer, Z-Wave Plus 700 Series","description":"\u003cp\u003eThe JascoPro 59383 is a 700 series Z-Wave paddle dimmer for US single-gang boxes. Press and hold the paddle to dim by hand, or set levels from your Z-Wave hub with schedules, scenes and automations.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZ-Wave Plus V2 (700 series) with S2 security and SmartStart\u003c\/li\u003e\n\u003cli\u003eDims dimmable LED, CFL, halogen and incandescent lighting\u003c\/li\u003e\n\u003cli\u003eMulti-colour LED indicator\u003c\/li\u003e\n\u003cli\u003eWhite and light almond paddles included\u003c\/li\u003e\n\u003cli\u003eQuickFit housing and SimpleWire terminals for an easier install\u003c\/li\u003e\n\u003cli\u003eWorks with up to four JascoPro add-on switches for multi-way control (sold separately)\u003c\/li\u003e\n\u003cli\u003eMains powered, so it also repeats Z-Wave signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 59383\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave Plus V2 (700 series), US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eSupply: 120 V AC, 60 Hz; neutral wire required\u003c\/li\u003e\n\u003cli\u003eIncandescent: 600 W single gang, 500 W 2-gang, 400 W 3-gang\u003c\/li\u003e\n\u003cli\u003eDimmable LED\/CFL: 360 W (3 A)\u003c\/li\u003e\n\u003cli\u003eRange: up to 150 ft (45 m) line of sight to the nearest Z-Wave device\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 40°C\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited (Jasco)\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003cp\u003eInstallation must be carried out by a qualified electrician in line with local wiring codes. Wallplate not included; it takes a standard single-gang Decora-style plate.\u003c\/p\u003e\n\u003cp\u003eThis is the US version for the US Z-Wave frequency (908.42 MHz) and 120 V AC 60 Hz mains. It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Jasco Pro","offers":[{"title":"Default Title","offer_id":67252592967795,"sku":"US-JA59383","price":55.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/JA59383_media-002_38f9b451-ed29-402f-9147-99359f5b5296.jpg?v=1795047106"},{"product_id":"jascopro-in-wall-add-on-toggle-switch-59380-us","title":"JascoPro In-Wall Add-On Toggle Switch for Multi-Way Control","description":"\u003cp\u003eThe JascoPro 59380 is a wired add-on (auxiliary) toggle switch. It lets you control a light from a second, third or further location when the light is already wired to a JascoPro Series smart switch or dimmer. It has no radio of its own: it talks to the primary switch over the traveller wire.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdds 3-way to 6-way control to a compatible JascoPro Series smart switch or dimmer\u003c\/li\u003e\n\u003cli\u003eUp to four add-on switches per primary switch\u003c\/li\u003e\n\u003cli\u003eQuickFit housing, about 20% smaller than standard\u003c\/li\u003e\n\u003cli\u003eOffset dual ground terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 59380\u003c\/li\u003e\n\u003cli\u003eTerminals: neutral, ground and traveller\u003c\/li\u003e\n\u003cli\u003eEach add-on within 200 ft of the primary switch, add-ons within 75 ft of each other, total traveller run no more than 300 ft\u003c\/li\u003e\n\u003cli\u003eNo Z-Wave radio; not added to your hub\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA compatible JascoPro Series in-wall smart switch or dimmer (sold separately) wired as the primary switch, plus a neutral and traveller wire at each add-on location.\u003c\/p\u003e\n\u003cp\u003eInstallation must be carried out by a qualified electrician in line with local wiring codes. Wallplate not included; it takes a standard single-gang toggle wallplate.\u003c\/p\u003e\n\u003cp\u003eFor US 120 V AC 60 Hz wiring.\u003c\/p\u003e","brand":"Jasco Pro","offers":[{"title":"Default Title","offer_id":67252593918067,"sku":"US-JA59380","price":22.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/JA59380_media-001.jpg?v=1795047150"},{"product_id":"jascopro-plug-in-smart-switch-z-wave-800-79244-us","title":"JascoPro Plug-In Smart Switch, Z-Wave Plus 800 Series","description":"\u003cp\u003eThe JascoPro 79244 is a compact 800 series Z-Wave plug-in switch. Plug it into a standard US wall outlet, plug in a lamp or small appliance, and switch it from your Z-Wave hub with schedules, scenes and automations. No wiring is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e800 series Z-Wave chip\u003c\/li\u003e\n\u003cli\u003eSingle Z-Wave controlled outlet\u003c\/li\u003e\n\u003cli\u003eMains powered, so it also repeats Z-Wave signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 79244\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave 800 series, US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eSupply: 120 V AC, 60 Hz; US Type B plug and outlet\u003c\/li\u003e\n\u003cli\u003eRange: up to 150 ft (45 m) to the nearest Z-Wave device\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003ePlug-in smart switch and manual.\u003c\/p\u003e\n\u003cp\u003eThis is the US version for the US Z-Wave frequency (908.42 MHz) and 120 V AC 60 Hz mains. It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Jasco Pro","offers":[{"title":"Default Title","offer_id":67252593950835,"sku":"US-JA79244","price":43.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/JA79244_media-001_fcd1353a-a600-45bf-86e9-5d3f8e549dda.jpg?v=1795047151"},{"product_id":"jascopro-water-leak-sensor-z-wave-800-81018-us","title":"JascoPro Water Leak Sensor, Z-Wave Plus 800 Series","description":"\u003cp\u003eThe JascoPro 81018 is a battery-powered 800 series Z-Wave water leak sensor. When water touches the contacts under the base or on the detachable probe, it sounds its own alarm and tells your Z-Wave hub, so you can get an alert or close a Z-Wave water valve.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e800 series Z-Wave chip with SmartStart and S2 security\u003c\/li\u003e\n\u003cli\u003eDetects water at the three pins under the base or at the detachable probe\u003c\/li\u003e\n\u003cli\u003eBuilt-in audible alarm as well as hub notifications\u003c\/li\u003e\n\u003cli\u003eRGB status LED\u003c\/li\u003e\n\u003cli\u003eSits on the floor, or fixes to a wall or cabinet with tape or the screw and anchor provided\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 81018 (ZWN6310)\u003c\/li\u003e\n\u003cli\u003eRadio: Z-Wave 800 series, US frequency 908.42 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 x CR2 (included)\u003c\/li\u003e\n\u003cli\u003eRange: up to 150 ft (45 m) line of sight to the nearest Z-Wave device\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 40°C\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need\u003c\/h2\u003e\n\u003cp\u003eA US-frequency (908.42 MHz) Z-Wave controller, sold separately.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003eSensor base, detachable probe, CR2 battery, screw and anchor, adhesive tape and manual.\u003c\/p\u003e\n\u003cp\u003eThis is the US version for the US Z-Wave frequency (908.42 MHz). It will not join a UK or European Z-Wave network.\u003c\/p\u003e","brand":"Jasco Pro","offers":[{"title":"Default Title","offer_id":67252594016371,"sku":"US-JA81018","price":47.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0066\/8149\/3559\/files\/JA81018_media-001.jpg?v=1795047152"}],"url":"https:\/\/www.vesternet.com\/pt\/collections\/brands-jasco.oembed","provider":"Vesternet","version":"1.0","type":"link"}