Humidity Sensors

Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5

• Integrated Flood Sensor, Humidity Sensor and Temperature Sensor
• Extremely low power consumption
• Higher output power to enhance the communication range
• Slim, small and elegant
• Very easy to install
• Z-Wave Plus Certified

Z-Wave Secure SES303 Temperature & Humidity Sensor Gen5

• Precise and continuous measuring of temperature and humidity
• Supports configurable data reporting
• Supports either one thermistor prob SES 001 or up to four external digital pipe/tank temperature sensors SES 002 / SES 003
• Fixing compatible to British standard single gang wall box
• Battery-operated (two-year life)
• Quick and easy to install and setup
• Z-Wave Plus Certified

The MH7H-EH V2 thermostat is a device for room temperature control, equipped with Z-Wave wireless technology used to control electrical heating systems.

• Capacitive touch buttons
• Tempered glass panel, PC alloy enclosure
• Precise temperature calibration function
• Clear display, easy to operate
• Humidity Sensor included
• Programmable schedule: 4 events each day of 7 days 5+2; 5+1+1
• Operation: Manual, Auto (Time periods), Holiday (Energy saving)
• Z-Wave Plus Certified

MCOHome PM2.5 Monitor is an air quality controller which is compatible with the Z-Wave technology. It is mainly used to monitor PM2.5 concentration but also monitors the indoor temperature and humidity

• Monitor PM2.5 value in the air with high accuracy
• Power supply: 230V
• PM2.5 detection range: 0-999.9 ug/m3
• Temperature range: -9.0~50 °C; Humidity range: 0%~99%RH
• Z-Wave Plus Certified

MCOHome PM2.5 Monitor is an air quality controller which compatible with Z-Wave technology, it is mainly used to monitor PM2.5 concentration but also monitoring the indoor temperature and humidity

• Monitor PM2.5 value in the air with high accuracy
• Power supply: 12VDC
• PM2.5 detection range: 0-999.9 ug/m3
• Temperature range: -9.0~50 °C; Humidity range: 0%~99%RH
• Z-Wave Plus Certified

MCOHome CO2 Monitor is an air quality detector which is compatible with Z-Wave technology

• Monitor CO2 concentration in air with high accuracy
• Monitors indoor temperature, humidity and VOC (optional)
• Power supply: 230VAC
• CO2 range: 0-2000ppm, default alarm threshold: 1000ppm (adjustable)
• Temperature range: -9.0～50 ℃; Humidity range: 0%～99%RH
• Z-Wave Plus Certified

MCOHome CO2 Monitor is an air quality detector which is compatible with Z-Wave technology

• Monitor CO2 concentration in air with high accuracy
• Monitors indoor temperature, humidity and VOC (optional)
• Power supply: 12VDC
• CO2 range: 0-2000ppm, default alarm threshold: 1000ppm (adjustable)
• Temperature range: -9.0～50 ℃; Humidity range: 0%～99%RH
• Z-Wave Plus Certified

Monitor your weather & environment, indoor and outdoors

• Measure indoor / outdoor temperature & humidity
• Measure indoor CO² concentration & noise pollution
• Monitor barometric pressure
• Use with the Netamo Connected Weather Station

A sensor that measures both temperature and humidity

• TellStick compatible
• Approved for outdoor use
• Measures temperature & humidity
• Battery operated = Ultra portable

Oregon Scientific THGR122NX Temperature and Humidity Sensor 3 Channels

• Wireless thermo-hygrometer
• Indicates the temperature in °C or °F
• Measurement temperature range: -50° C to + 70° C
• Measuring range humidity: 5% to 95%
• Adjustable to 3 channels
• Low battery indication
• Box for wall mounting or installation on table

Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

• Integrated Humidity and Temperature Sensor
• Extremely low power consumption
• Higher output power to enhance the communication range
• Slim, small and elegant
• Tamper switch included
• Very easy to install
• Z-Wave Plus Certified