Water Leak & Freeze Detectors
Long-lasting water leak detection sensors
Water leak sensor
Easy to place in hard to reach places, such as under a washing machine or sink
Early notification of water leak, preventing damage
Easy set up & installation
Mounting plate included
Suitable for outdoor usage
Convenient up to 10 years long-lasting battery - no charging or changing needed
Certified Z-Wave Plus Go to product page
The ultimate Z-Wave Flood, Temperature and Tilt sensor.
Detects water to alert for floods Unique floating design Tilt and Temperature sensors Integrated siren and RGB LED indicator Battery or VDC powered Certified Z-Wave Plus Go to product page
Z-Wave Plus Aeotec Water Sensor 6 contains 4 sensing points, which detect the presence and absence of water or detect whether there is a water leak in particular areas of your home.
Monitor and protect against leaks and floods in real-time
Super accurate water sensor that can detect as little as 0.03% of an inch of water
Use with temperature control and floor heating systems; inbuilt temperature sensor can monitor between -20ºC and 100ºC
Battery powered (battery included) and waterproof
Built-in 60 decibel siren to notify you when the leak occurs
Certified. Z-Wave Plus Go to product page
The Popp Flood Sensor is a universal Z-Wave compatible flood sensor indicating water leakage in Smart Homes.
In case of a water leackage LED starts blinking and the device will send an alarm message to a central Z-Wave controller Receive a message on your smartphone in case of water leackage Act immediately and prevent damages caused by water even when you are not at home Group it with other smart devices like POPP Flow Stop Controller trough Z-Wave controller and turn off the water automatically Battery powered (1 x CR14250) Easy Installation IP44 protected - suitable for outdoor usage Certified Z-Wave Plus Go to product page
Easily protect your property from floods or water damage.
Works in any Z-Wave network Supports up to four Z-Wave devices Low-battery alarm notification Easy Installation - Requires no extra wiring Go to product page
This battery-powered Z-Wave water sensor by Hank is capable of detecting both the absence and presence of water at measurements as small as 0.03% of an inch.
Flood sensor that accurately detects presence and absence of water
Compact design for easy installation on the floor and at the wall
Included wallmount with sensor probe
Low battery status alerts
Integrated temperature and vibration sensors
Firmware Updates Over The Air (OTA)
Certified Z-Wave Plus Features
S2 security Go to product page
Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5
Integrated Flood Sensor, Humidity Sensor and Temperature Sensor Extremely low power consumption Higher output power to enhance the communication range Slim, small and elegant Very easy to install Certified Z-Wave Plus Go to product page
ZipaBox Flood Multisensor 3 in 1 Z-Wave Gen5
High sensitive linear flood detector Flood, temperature, humidity sensors integrated in one device Slim, elegant design Long communication range Tamper proof protection Extremely low power consumption, 7 years battery lifespan Low power indication Easy installation Certified Z-Wave Plus Go to product page
A sensor from Telldus that is perfect for the fridge or freezer
Perfect for the fridge or freezer Temperature is measured by the probe Approved for indoor and outdoor use Comaptible with TellStick Go to product page
EZVIZ T10 Wireless Water Leak Detector is easy to use Wireless Water Leak Detector with an unique design and high sensibillity water leak detection.
High sensitivity water leak detection High performance RF communication Fashionable appearance, simple design, high reliability Support battery power supply Works with EZVIZ Internet Alarm Hub (sold separately) Go to product page
Adding a water leak detector to your security system or home automation system helps increase your peace of mind and protect your home from burst pipes, leaks, floods and freezing temperatures.