5 Star Service
A British standard four load switch to operate lighting/fans via the Z-Wave Network.
The MCO Home TPS314 Gen5 is a wall switch with 4 integrated switch relays for British standard wall boxes allowing you to control scenes with it. The relays can be controlled both with the touch switches, which are integrated into the glass surface and via Z-Wave commands.
The relays can switch 4 loads with up to 1,100 watts each. Beside local switching, the device can be used to control 4 groups of directly associated devices. A blue LED on every button indicates the switching status. The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relays are located inside a module which is directly connected to the glass touch button.
With the MCO Home wall switch, you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box and is made for British standard wall boxes, therefore it can't be used in German wall boxes.
With the stylish glass wall switches by MCO Home, you can easily integrate your already installed lights into your home automation network. Without installing any new cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation.
The MCO Touch Panel Switch - Four Load is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information