5 Star Service
Control all switchable and non-dimmable electric installations and integrate it into a Z-Wave network with Z-Wave Plus Aeotec Dual Nano Switch with Power Metering
Control any switch and socket wirelessly from anywhere.
Aeotec Dual Nano Switch is a low-cost Z-Wave Switch specifically used to enable Z-Wave command and control (on/off) of any wall switches. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit's operating status.
It can connect to 2 external manual switches to control the load ON/OFF independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Dual Nano Switch. The Dual Nano Switch is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.
Nano Switch offers total control, easily. Incredibly small, each Nano Switch installs invisibly behind any of your home's existing switches or power sockets. Simply unscrew the faceplate, install Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
Install Nano Switch behind your wall's power sockets and you now have wireless control and scheduling of your electronics. With optional power metering, you can reduce how much those electronics are costing you.
If you have lighting that doesn't need dimming, install Nano Switch behind your existing wall switch to convert it to a wireless wall switch. You'll have full wireless switch control, along with intelligent automation and scheduling via Z-Wave.
Once installed behind a switch or socket, Nano Switch offers unparalleled wireless control via Z-Wave Plus. It lets you control, automate and monitor your lights and power sockets from anywhere, anytime. And it does it all through enhancement - with Nano Switch, your sockets and switches don't have to be replaced and they'll continue to offer the same manual control that you're used to.
Nano Switch is a tool that installs in a few minutes. It lets you control, monitor, automate and schedule the electronics in your home. Control the electronics you use every day - your lights, appliances and entertainment systems. There'll also be the electronics that become a part of your smart home as it grows - security and safety devices, electronics indoors and out. If there's a reason to automate it, to monitor it or make it responsive, Nano Switch is the invisible, controlling, and responsive touch.
Safely Small and Controllable from Anywhere
Dual Nano Switch works with your existing switches and sockets and can be easily controlled and scheduled trough the Z-Wave network by a Z-Wave gateway and app. It can also be controlled by other Z-Wave devices such as Aeotec's WallMote.
Beside its small size that allows your Dual Nano Switch to be installed behind your home's switches or sockets, Nano Switch also features with In-built surge protection and AES-128 bit wireless encryption.
Monitor your energy costs
Thanks to Aeotec's super-accurate energy metering technology which records electricity use with 99% accuracy, now you can monitor energy consumption and help you to reduce your future costs.
Safer and easier wiring
Dual Nano Switch only works with switches and outlets that utilise a neutral wire. Thanks to its smaller design, Dual Nano Switch also connects to wires 25% thicker than past models.
Dual Nano Switch allows for firmware updates to be wirelessly installed via Z-Wave Plus and supports Over The Air (OTA) feature for the products firmware upgrade.
Designed to control sockets, switches and non-dimming lights powerfully Dual Nano Switch can control up to 10 amps.
Designed to fit behind a wall switch without compromising on safety, Dual Nano Switch offers twice the control at only 4.4cm x 4cm x 2.5cm.
Low voltage also
Dual Nano Switch is great with high voltage and low voltage. It can be used to control 24VDC electronics such as light strips, alarms, doorbells, and other low-powered devices.
The Z-Wave Aeotec Dual Nano Switch with power metering is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information