Question 1

When is this thermostat going to be available? Also, will it work an electric underfloor heating system?

Asked 5 ´years ago | Brands - Heltun > Z-Wave Plus V2 Heltun Heating Thermostat

Question 2

Hello, I'm looking to update my secure 321 Thermostat with something that looks a bit more modern but it needs to be battery driven do you have anything that will work with the secure 2 channel receiver I just purchased from you, thanks View answer

Asked 5 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 2 Pipe - Black

Question 3

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 4

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 5

Hello I bought one of these from you a few years ago, I dont think it is zwave plus, are these new ones? thanks View answer

Asked 5 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 6

Will this be able to control 2-way lighting circuits? View answer

Asked 5 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 7

Hi, Will this work with Samsung SmartThings, controlling the duo switch independently. If not, can you advise what switches will? Thanks View answer

Asked 5 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Two Buttons - White

Question 8

does this can be use as range extender (mesh). as you know most of z-wave product that work on battery dont transmite to thier Neighbors command but z-wave ac plug product do View answer

Asked 5 ´years ago | Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 9

Could I use this to control a 12.5kw shower View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 10

Is this compatible and will reliably work with Vera Secure? View answer

Asked 5 ´years ago | Z-Wave Plus Popp Flow Stop 2

Question 11

Hi I would like to install this into a air conditioning/ heating system would you be able to offer me some assistance if I was to supply you with the make and model no of the Ac/ Heating unit ? View answers

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 12

I have a Danalock and want to remotely open the lock when away from the house, will this allow me to do this on my phone with 4g or do I require to have wifi signal ? View answer

Asked 5 ´years ago | Danalock Danabridge

Question 13

Hi, Will this switch work with gateway such as Vera and Homey? And when do you plan to have it in stock. Thanks! View answer

Asked 5 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 14

Is the relay single pole or double pole (ie does it switch only the live connection or both L and N connections)? View answer

Asked 5 ´years ago | Z-Wave Heatit Z-Relay - 25A

Question 15

There is no mention about power supply in the spec or how to use. I assume its batteries? Standard 2032s? View answers

Asked 5 ´years ago | Z-Wave Plus Popp Flow Stop 2

Question 16

I have several of these devices and wish to use them with Home Assistant. I have managed to lose the little document that came with them. Can you tell me what values I should use to know when the sensor has detected smoke, please? Many thanks, John Chapman View answer

Asked 5 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 17

Hi do you know if these support Triac dimmable as required by these downlights ? https://www.electrical2go.co.uk/jcc-v50-colour-selectable-fixed-fire-rated-led-downlight-7w-650lm-ip65-white.html Thanks Rob View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 18

Dear Sir i want ask you about the switch in wich frequency do u have it . and do have it in stock . Thanks View answer

Asked 5 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 19

Is this the latest 2020 upgraded model (“Z-Stick Gen5&#43“) that will work with a Raspberry Pi 4 directly without the need for an external USB hub?

Asked 5 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 20

I'm looking for a standalone DC power supply to go with this unit. Does anyone here have any recommendations? View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 21

Could I use this module to control 300w towel radiator View answer

Asked 5 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 22

Is this just a repeater or does it actually boost signal higher and receive with greater sensitivity than other repeaters such as built into the Aeotec Z-Wave Plus Aeotec Smart Switch 6? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Range Extender 6 - UK Socket

Question 23

has anyone tested it with Fibaro Home Center 2? Does it work ok? View answer

Asked 5 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 24

Will I be able to use the RaZberry 2 with it's Z-way software as a secondary controller on my Hubitat to analyse Z Wave Network and remove any ghost nodes and troubleshoot any routing issues. I know this is possible with Silicon labs PC controller and a UZB Stick but I do not own a PC. View answer

Asked 5 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 25

Is there a UK plug version available? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Smart Switch 7

Question 26

How long is the sensor lead? and it be lengthened if needed? View answer

Asked 5 ´years ago | Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5

Question 27

Will this work in the states? View answer

Asked 5 ´years ago | Athom Homey Pro

Question 28

Would this be able to control non dimmable LEDs? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Dual Nano Switch with Power Metering

Question 29

Do you have any info when Aeotec's 700 series Zwave Controller (that they acquired from Popp) is expected to appear. Trying to make an intelligent choice to replace aging Vera unit and leaning towards the Hubitat, mostly because it's the only one available! View answer

Asked 5 ´years ago | Hubitat Elevation Model C-7 Hub (UK version)

Question 30

Will it be the new c-7 in stock late July ? Do you ship to Sweden? /Mattias View answer

Asked 5 ´years ago | Hubitat Elevation Model C-7 Hub (UK version)

Question 31

I have a Vera Plus at the moment and am looking to move to the HC3. I use the dataMine2 plugin on Vera for getting graphs of data over time. Does the HC3 have similar functionality? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 32

Would you have the UK version (3 pin) version ? Thanks Alan. View answer

Asked 5 ´years ago | Aeotec Range Extender 7 - EU Socket

Question 33

Hi Just a follow-up question about import/export power. Is this able to monitor flow direction from one clamp -> i.e. whether my solar system is exporting or not to the grid? Mitul View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 34

Hi All After years of trying to find a good zwave remote control I think I might have hit on a good (crazy) idea. Would this module work behind a light switch if there was no output load to control ? My plan is to use something like this https://www.ukelectricalsupplies.com/retrotouch-07100-simplicity-white-2-gang-retractive-light-switch.htm, so i should get the ability to control four scenes, using s1 and s2 Would I be correct that it will work with out a light to control. Thanks Rob View answer

Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 35

Hi Are there for 2 or 3 wire systems? Does it need a neutral cable? Kind Regards Juan View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Module

Question 36

Does this module work with the Hunter Douglas M25S 24V motor used in Luxaflex Duette blinds? https://motorisation.hde.nl/wired/24V/Motors/M25S/M25S-data-sheet/M25S-data-sheet.pdf On paper it all looks good but I know sometimes that doesn't work out in practice when motors have soft start/stop View answer

Asked 5 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 37

Hi, how well does this work with SmartThings and in particular the energy monitoring? Many thanks Mark View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 38

How well does this device work in Smartthings and in particular will Smartthings report power usage? Many thanks View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 39

Hello! Do you have for RGBW Fibaro module? Thanks. View answer

Asked 6 ´years ago | Eutonomy euFIX Adapter DIN for Fibaro Dimmer 2

Question 40

How well do these sensative drip sensors work in carpetted areas. I have 2 areas of my house where we have experienced leaks and both have carpet. If these are not suitable can you recommend a z-wave sensor that might work? View answer

Asked 6 ´years ago | Z-Wave Sensative Drip - Gen5

Question 41

What model is this? is it the C5 Version? View answer

Asked 6 ´years ago | Hubitat Elevation Model C-7 Hub (UK version)

Question 42

Hi, Is this the hubitat elevation c5 version? /L-O View answer

Asked 6 ´years ago | Hubitat Elevation Model C-7 Hub (UK version)

Question 43

Please can you provide a guide to use the aeotec nano shutter to motorise Venetian blinds for tilt, raise and lower? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Nano Shutter

Question 44

If I put the relay on momentary mode and press the momentary switch once (and release), the light that connect to relay output will stay at ON (toggle) till I press the momentry again, is that correct? If so, does it means that for 2 way implementation I just need 2 momentry switches connect in parallel to the same input at the qubino 2 relay and every press on one of the momentry switch will toggle the light to ON or OFF? I can't find such suggestion in you app notes guides. Thank you! View answer

Asked 6 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 45

What is the power consumption in watts? View answer

Asked 6 ´years ago | Fibaro Home Center 3

Question 46

Why does the Aeotec Multi 6 report a 23 lux when my Philips Hue sensor reports 14606 lux in virtually the same position. I've tried it with 3 Aeotec Multi 6s now with the same sort of difference, I'm concerned because I want to use to switch on lighting when required? They even report 0 lux when there is enough light to read a book! View answers

Asked 6 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 47

I can see the 2 and 3 way wiring diagrams without a neutral. Do you have a 2 and 3 way wiring diagram with a neutral? Thanks. View answer

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 48

The manual says the max cable length is 2m. Is this the length of cable from the unit to Led strip or the Led drip itself? View answer

Asked 6 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 49

will this work with fibaro dimmer 1 ? View answer

Asked 6 ´years ago | Brands - Aeotec > Z-Wave Plus Aeotec Nano Dimmer Bypass

Question 50

Can this Aeotec button connect directly to Smartthings? View answer

Asked 6 ´years ago | Aeotec Button

Browse by Topic

Tools