Question 1

Asked 6 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 2

Is the battery rechargeable or replaceable? View answers

Asked 6 ´years ago | Z-Wave Philio Multisensor - PIR / Light / Temp - Gen5

Question 3

I bought one of these earlier in the year, am hoping to use to add functionality to an automatic gate opener. I've struggled to get it added into Homeseer correctly, only Output 1 has shown up. Have any Homeseer users had any success getting both outputs to add correctly? If so, any tips? View answer

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 4

Does this module work with wood venitian blinds? View answer

Asked 6 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 5

Hi, Can you tell me if the Vision Dimmer Bypass should work with the Fibaro Dimmer 1 module? Thanks View answer

Asked 6 ´years ago | Vision Dimmer Bypass

Question 6

Which z wave stick / hub / device do you recommend for use with Secure Thermostat / Receiver and Homeseer? Please note I am a long time user of Homeseer (early 2000) upgrading from HS1,2 to HS3. For the last 15 years I have used a purpose designed multi (6) zone system controlled by Homeseer running Xap plugin to Phaedrus NETIOM to create heating scenes. I am now moving on to an existing single zone combi boiler dwelling. I have no desire or requirement to rejig the new system to a plumbed multi-zone effort. I see this combination as a first step to migrate to a zwave set up from my X10 devices, curing the heating issue in the process. View answer

Asked 6 ´years ago | Z-Wave Plus Secure Wall Thermostat & Receiver Set - Gen5

Question 7

Does this control both hot water and heating? View answers

Asked 6 ´years ago | Z-Wave Plus Secure Boiler Receiver HRT Gen5

Question 8

Why is there no technical documentation on your site for this device? The description and spec is very poor, as well.

Asked 6 ´years ago | Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 9

Why should i use this product? View answer

Asked 6 ´years ago | Brands - Aeotec > Z-Wave Plus Aeotec Nano Dimmer Bypass

Question 10

Can you clarify what this means, in real terms, "Battery operated possible: 1x PT502035 (400mAh) (only for bridging)"? Can I use it as doorbell with just the batteries or does it have to be plugged in?

Asked 6 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 11

Can these fit into one of the "Aeotec Recessor for MultiSensor 6" per chance, even if they are not designed too? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 12

On what Mhz does it works and does it work on a HC2 from Fibaro View answer

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 13

Can this be mounted outside? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 14

Please advise the lead time for these modules. We need to procure 5 of them as soon as available. Regards, Warwick

Asked 6 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 15

Hello Could I use this connected to the 12v bell output (I.e. the +and- terminals) in my house intruder alarm to tell my Samsung SmartThings box that the siren is ringing? This would be a remote alert as lightening frazzled the built-in comms dialler! It’s not clear to me from the manual that I could put the 12v through to say “it’s ringing” and “stopped ringing” when it’s 0v. I am also not clear on whether I will be able to configure it with ST (I don’t have the Fibaro control system), or not. Thank you in advance. Neil

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 16

Is the usb power on permanently or does it switch on and off with the main unit? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 17

I've tried to standardise with Fibaro kit but their Dimmer 2 doesn't appear to offer 0-10V output like this Qubino Flush Dimmer. Is that right? View answer

Asked 6 ´years ago | Z-Wave Qubino Flush Dimmer 0-10V Plus

Question 18

Is this model come with a UK plug ?

Asked 6 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 19

Hello, I was wondering whether you have this item suitable for an american-style box, at the size of 120mm wide, instead of 86mm? Thanks, Gal.

Asked 6 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Two Load - UK

Question 20

Managed to put in a workaround but I found with a original style lightbulb it would cut out when I turn the brightness above 60% and then start flashing red. I've updated the config so that max power is 60% as this is just the porch light and I don't really need it that bright in there. But I'm concerned what happens if I purchase more.

Asked 6 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 21

I ordered this product before 3 days. Can you tell when the item will be in stock? Thank you.

Asked 6 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 22

I bought two of these to replace the previous generation ones. however, I'm unable to control these lights remotely on my Vera unit from other devices. Aeotec 4 button remote. I've seen other people who can't now remotely control these. Any ideas?

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 23

I have a fibaro lite home center - with sensor strips on windows and doors. Is this compatible? View answer

Asked 6 ´years ago | Z-Wave Popp Solar Outdoor Siren 2

Question 24

I have purchased this and it works fine, but I can't find a way to mount it nicely. UK backboxes and the extension plates for them have recessed mounting tabs. The switch can xxxx on to these with no problem, but it is recessed too far for the front cover to be able to clip onto the main switch housing. Please advise.

Asked 6 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 25

what kind of range should I expect for this? I have a lot of walls between where my vera is and where my 433 device is... View answer

Asked 6 ´years ago | RFXtrx433XL USB 433.92 MHz transceiver with antenna (NEW model)

Question 26

I will be building a new house starting in a few months time and I want to implant temperature sensors in the concrete slab. I have 2 questions; firstly in the manual it says this can be burried concrete with the right protection, what would that protection be please?? Secondly, what would you recommend for protecting the string of temp tensors so they can be safely buried in the concrete and what cable would you connect them with ?? Thanks Chris

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 27

Hi, I'm using Domoticz running on a RPi, does this classify as a 'security Enabled Z-Wave Plus Controller' as specified as a requiremjent to fully utilise the Remotec ZXT-600 Z-Wave+ to IR Extender for AC ? Thanks Steve View answer

Asked 7 ´years ago | Z-Wave Remotec ZXT-600 Z-Wave+ to IR Extender for AC

Question 28

Does this support pulse counting at hardware level ? I'm looking for something to interface to water flow meters with a pulsed output. It would obviously need to store number of pulses received over a certain time period.

Asked 7 ´years ago | Z-Wave Fibaro Smart Implant

Question 29

Will this work with Samsung Smartthings ? View answer

Asked 7 ´years ago | All > Z-Wave Fortrezz Outdoor Siren & Strobe Alarm

Question 30

Will the Z-Wave Qubino Flush Dimmer 0-10V Plus work with Samsung smartthings to control my Ecopac Constant Voltage 0/1-10V Dimmable LED Driver ELED-200-24V 200W 24V

Asked 7 ´years ago | Z-Wave Qubino Flush Dimmer 0-10V Plus

Question 31

When will this product be in stock? View answer

Asked 7 ´years ago | Athom Homey Pro

Question 32

This appears to be a re-incarnation of the Fibaro Universal Binary Sensor which will not now recognise DS18B20 inputs although it used to do so. Is this unit any the more reliable?

Asked 7 ´years ago | Z-Wave Fibaro Smart Implant

Question 33

I wish to use this to wirelessly (zwave) control my Danfoss thermostats (also Zwave). Can you confirm that this devise is able to do so? And, I wonder if the fan-controller can be used to automatically turn on a fan for heat-moving near the fireplace? Say, if it is 23 degree it should automatically turn on the vent. But if it is too noisy or so, I can turn down the speed? Its hard to find the exact details on this product and MCO does not reply on their website... Thanks! View answer

Asked 7 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 4 Pipe

Question 34

Hi, When will the Z-Wave Fibaro Double Switch 2 be available in stock? I have been waiting for the appearance of this device around a week( View answer

Asked 7 ´years ago | Z-Wave Fibaro Double Switch 2

Question 35

Hi. Can I use 3 x 7W led bulbs and 1 x 3W led bulb on the same circuit? Or do all the bulbs need to be the same wattage? Thanks View answer

Asked 7 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 36

Good afternoon- can you confirm that this will only work with Popp ? and is NOT compatible with any Z-Wave hub devices ie Fibaro ? Best regards Chris

Asked 7 ´years ago | Popp 433 Bridge - Black

Question 37

Can this product be used outdoors? View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 38

Can the unit be run from a USB / mains power supply? I don't trust the battery life claims from manufacturers. View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 39

Is this Trisensor replacing the Aeotec Multisensor 6, which has 6 different sensors?

Asked 7 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 40

Do these use the same motion sensor as Aeotec's Multisensor with motion, UV, humidity, vibration, temperature and lux? I'm hoping they don't as the motion sensor in the Aeotec 6-way multisensor is very poor, I have about 5-6 of them and even on the highest setting they often don't detect me even if I walk right up to them and jump around.

Asked 7 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 41

When was this published?

Asked 7 ´years ago | Z-Wave Essentials Book

Question 42

I am using the Fibaro Dimmer 2 to control the main lights in my lounge on S1, and to control the lamps by association in Group 5 which are connected to wall dimmers using S2. I have managed to get it all working, but I would like to connect more than one lamp. I have tried to add a second association but it never seems to stick. I have attempted this with OpenHAB, my main server, and with Domoticz control centre. Can you tell me whether this is possible? From the limited documentation I can find, and my experience with associating other devices, I believe it should be.

Asked 7 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 43

I am looking for a capacitive mono-stable wall switch to be used with a z-wave dimmer module. I'm struggling to find ones which will work as desired as most will not register a long press/hold – instead, they always accept touch as a momentary on/off. What I would like is for it to mimic a mono-stable switch (bell-push) i.e. touch once for on/off and hold for dim up/down, which I know can be set by the Fibaro parameters – but I can't find a capacitive plate wall plate that does this. Note, ideally I'm looking a double switch.

Asked 7 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 44

Hi! This dimmer operate in Europe frequency range? Thanks View answer

Asked 7 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 45

Hi, To control the lights via z-wave do I have to keep this switch always "on"? Or i can control via z-wave regardless of the status of the touch pannel? Thanks, Z View answer

Asked 7 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 46

I currently have a single piece door handle and lock cover on a uPVC door. 1. It looks as though this device only covers the lock - is this assumption right? 2. Does it then need mounting to the door with screws? I'm just a little concerned about more holes in the door... Anyone actually fitted one? A few practical comments would be invaluable. Thanks View answer

Asked 7 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 47

What's the difference between roller shutter 2 & 3? Are there any new features to note?

Asked 7 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 48

So I have this bulb now, it's connected to my vera plus, I can get it to dim and switch on/off. How to i change the color with in vera. Thanks

Asked 7 ´years ago | Z-Wave Plus Aeotec LED Bulb 6 Multi-White (E27)

Question 49

Im attempting to use this with HomeSeer, has anyone else managed to use a backup & restore function with the same set up ?

Asked 7 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 50

How does this differ from Roller Shutter 2? View answer

Asked 7 ´years ago | Z-Wave Fibaro Roller Shutter 3

Browse by Topic

Tools