Question 1

What's the average battery life expectancy?

Asked 8 ´years ago

Question 2

Has anyone got this (Yale Smart Living Z-Wave Module 2) to work with the Zipato Zipabox?

Asked 8 ´years ago

Question 3

Can this control a central heating pump or just resistive load? View answers

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 4

What's the difference between this and the first version? View answers

Asked 8 ´years ago

Question 5

Hello, Can this touch Panel control shutters or blinds? Thank you View answer

Asked 8 ´years ago

Question 6

Hi, Can this switch fix on the UK standard backbox 35mm depth? https://www.screwfix.com/p/appleby-1-gang-35mm-dry-lining-box/44827 If not, what backbox should I use? Also, what is the difference between this Gen5 and the other similar priced non-Gen5 switch? Thank you in advanced. Joe. View answer

Asked 8 ´years ago

Question 7

I'm about to pull the trigger on the Conexis L1 and Z-Wave Module 2 for my Fibaro HC2 but I'm hearing lots of reports of the module draining the 4 AA batteries in the Conexis L1 lock, like Malath A mentioned in the review section of this product on Vesternet Does anyone have more insight into this? Thanks Andy

Asked 8 ´years ago

Question 8

I am currently using these with 240v halogen bulbs and wanted to switch to LED. In some places it will be 3 wired and in others I will add a bypass unit. Is there any particular brands of dimmable 240v LED bulbs that people have had success or problems with? Or am I pretty safe just going with shop own brand? They would be either E27 golfball bulbs or gu10 spots View answer

Asked 8 ´years ago

Question 9

Are they shipping with v1.11 firmware? Short of buying a usb device too there is no way to upgrade via smartthings. View answer

Asked 8 ´years ago

Question 10

Hi, can you use the temperature sensor within the fibaro motion sensor with the trv instead of its dedicated sensor? View answer

Asked 8 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 11

It can be used to turn on/off power for an entire apartment (of course without the hub) if currently I have a 32A common switch? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 12

Does it work with Samsung SmartThings Hub (F-HUB-UK-V2)? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 13

is this Gen5 ? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 14

The description states that this requires a neutral wire, however the single output version of this module does not; so is that correct in the description? View answer

Asked 8 ´years ago

Question 15

How compatible is it with Vera Lite? Is it OK to read its setpoint and to change it how quick is the updates? View answer

Asked 8 ´years ago | Z-Wave Fibaro Heat Controller

Question 16

I'm trying to use this switch to control load by both S1 and S2 (connected to separate switch), but it my case switch connected into S2 has no impact on the load. I had no problem with achieving the same effect with Everspring module AN179, but somehow it does not work with Fibaro. Have anyone has achieved such configuration (controlling load by both S1 & S2)? View answer

Asked 8 ´years ago | Z-Wave Fibaro Single Switch 2

Question 17

How can I configure this device for low water level detection? And how can I disable the optical and acoustical signal? View answer

Asked 8 ´years ago

Question 18

Does this module work with Fibaro? View answers

Asked 8 ´years ago

Question 19

is this z-wave plus ?? View answer

Asked 8 ´years ago

Question 20

I was seriously thinking about buying one of these for a house I am buying off plan but put off by the fact that this cannot be installed in direct sunlight and needs to be protected from rain. How can this be used as an external door entry system if it can’t be used outside? Also, with the camera, can I hook this up to an NVR to record the live stream like a CCTV camera? If the above can be confirmed, that would be great! Thanks, Hal View answer

Asked 8 ´years ago

Question 21

Hi I is it possible to use this module with a 2 way switch? If so how should I connect/configure it? Thanks View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 22

Hi does this product support 2 way switch as well or only 2 single switches? View answer

Asked 8 ´years ago

Question 23

Does this function as a normally open switch or normally closed switch? Is this configurable?

Asked 8 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 24

Can this control module act as a momentary switch? View answer

Asked 8 ´years ago

Question 25

As this can be immersed in water for low water level detection, can it give the temperature of the water. I was thinking of using this in a fish tank for water temp readings. View answer

Asked 8 ´years ago

Question 26

Can it be connected to an IPBX (SIP)?

Asked 8 ´years ago

Question 27

If you were using 3-position (on/off/on) switches would you need 3core+ earth cable running between all switches in a 2-way or multi-way lighting circuit? or could this be achieved with 2 core+earth cable between switches? thanks View answer

Asked 8 ´years ago

Question 28

if You use the Dimmer 2 with toggle switches in a 3-way lighting circuit, would you be able to use all 2-way switches or would you still need to use a intermediate switch in the circuit? View answer

Asked 8 ´years ago

Question 29

When using the Dimmer 2 in a 2-way or multi-way circuit, do the momentary (bell-push) switches need to be 2-way switches or will 1-way switches work? (as the wiring is simplified when using momentary switches). Such as the Varilight 2-Gang 6A 1-Way Push-to-Make Momentary Switch? Thanks View answer

Asked 8 ´years ago

Question 30

I bought this motion sensor and tried without success to include to my new smartthings hub v2 (UK version). Smartthings support advised me to confirm that the motion sensor is also a UK version (not a US one), as apparently the frequencies are different... Can you please confirm that this sensor works with the UK version of smartthings hub? View answers

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 31

Does the secondary switch have to be associated with other devices or can it appear in homeseer as a switch and then used to trigger an event View answer

Asked 8 ´years ago

Question 32

Does this opener it work with NO (normally open) strike locks? View answer

Asked 8 ´years ago

Question 33

Can this be used with an extension lead plugged into it? or would the load be to high with say a TV/Set top box etc all plugged in? View answers

Asked 8 ´years ago

Question 34

Will this control two light circuits? View answer

Asked 8 ´years ago

Question 35

I have a fused Switch controlling a fan and want to use this controller to operate the fan remotely as well as enabling the fused switch to continue controlling the fan at the wall, is there a wiring diagram showing how to achieve this? View answers

Asked 8 ´years ago

Question 36

Hi. Has anyone had a good experience with these? The concept is great, but not if it doesn't work! Is it the firmware that is unstable, or the controller software? Have the Vesternet staff had any experience with them? Also, are they always listening, or do they have a wake up period? Thanks, Ed View answers

Asked 8 ´years ago | Z-Wave Fibaro Heat Controller

Question 37

Is it fully compatible with Vera ? View answer

Asked 8 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 38

Are the actuators (relay wires) really opened for The Bad with crowbar?

Asked 8 ´years ago

Question 39

I have a Homeseer setup and have bought the Fibrao FGS 223. I have managed to include it but want to change the default toggle to momentary switch as that's what I have elsewhere [legacy X10]. I tried Setting Parameter 20 to 0 in homseer z-wave node but it just says error and dosent change. Any help please View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 40

Hi, is this the correct price or a mis-print........this seems a lot of money for a camera View answers

Asked 8 ´years ago

Question 41

Hi There. I'm confused how the heat controller on each Rad will "call" for heat on a standard UK boiler system. Surely there needs to be something on the boiler end to call the heat when the radiator valve asks for it? View answer

Asked 8 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 42

Hi, I want to use this to control a security light which doesn't have a switch. But it needs S1 to be toggled 3 times for inclusion. Is there anyway to include without this e.g. button B? View answers

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 43

Hi Folks. Is it feasible to use this sensor to control your central heating. If I used a fibaro relay to control the boiler could the temperature sensor be used as a thermostat to set or monitor the temperature or would I need to buy a dedicated Zwave thermostat? Any advice would be greatly appreciated. View answer

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 44

If I want to change batteries after installation, the whole housing will shoot up in to the insulation since theres no retention ring holding back the housing when I take the sensor out. It makes it near impossible to change batteries unless I'm able to get to the sensor from the backside. How do I do this?

Asked 8 ´years ago

Question 45

On OSX, are there any economical ways to get IFTTT type behaviour from the Z-stick (eg raising Apple events) - or Indigo the only game in town other than DIY? View answers

Asked 8 ´years ago

Question 46

Does anyone know if this can be installed vertically as the instructions say only horizontally which excludes most UK radiators? View answers

Asked 8 ´years ago | Z-Wave Fibaro Heat Controller

Question 47

Will this work if Vera light, ive seem reports it does not ? View answers

Asked 8 ´years ago

Question 48

How is this powered please? Battery / mains? Thanks View answers

Asked 9 ´years ago

Question 49

Does this report power usage "out of the box" or does it need to be configured to run on Vera Plus? View answers

Asked 9 ´years ago

Question 50

Does it disconnect the neutral line as well ? View answer

Asked 9 ´years ago

Browse by Topic

Tools