Question 1

Does this work with Flic ? View answer

Asked 3 ´years ago | Aeotec Smart Home Hub

Question 2

Does this work with Phillips Hue bulbs? And if so, how does it work with the Philips Hue hub? View answer

Answer posted 3 years ago | Vesternet Zigbee Dimmer

Question 3

Aeotec Smart Home vestanet Modules View answer

Asked 3 ´years ago | Aeotec Smart Home Hub

Question 4

Is this a arduino with a z-wave chip? View answer

Asked 3 ´years ago | Z-Wave.me Z-Uno 2 Board for Arduino - (Z-Wave 700 series)

Question 5

So if I use this instead of an Apple device hub will I still be able to allow and access iCloud recordings and view View answer

Answer posted 3 years ago | Zigbee Aqara Hub M2

Question 6

Will it work with Hubitat alone or do you still need zigbee hub? View answer

Answer posted 3 years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 7

Controller Which one? View answer

Asked 3 ´years ago | Support

Question 8

Aeotec Z-Stick Gen5 vs Aeotec Z-Stick View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Stick 7

Question 9

is it compatible with home assistant ? View answer

Asked 3 ´years ago | Shelly Plus 1

Question 10

Is there a mains powered version of this? Or an alternative smart heat alarm (not smoke) that is mains powered? View answer

Asked 3 ´years ago | Zigbee Frient Intelligent Heat Alarm

Question 11

I have a 3 wire dimmer, can i use the bypass to stop flicker? View answer

Asked 3 ´years ago | Vesternet Bypass

Question 12

Does this switch feature in the Z-Wave JS database https://devices.zwave-js.io/ for Home Assistant users? View answer

Asked 3 ´years ago

Question 13

Problems with Fibaro rgbw controller, drivers constantly powered View answer

Answer posted 3 years ago | Z-Wave Fibaro RGBW Controller 2

Question 14

Is this compatible with HC3? View answer

Asked 3 ´years ago | Z-Wave Donexon Varmo TZ Eco Thermostat

Question 15

Works with any bulbs? View answer

Asked 3 ´years ago | Z-Wave Plus MCO Touch Panel Switch - One Load

Question 16

Touchlink (bind) to multiple devices? View answer

Asked 3 ´years ago | Vesternet Zigbee Wall Controller - 4 Button

Question 17

Does the m1s gen 2 come with english plug View answer

Asked 3 ´years ago | Aqara Hub M1S Gen2

Question 18

Can add this in line near the extractor fan unit rather than at the fused spur switch as there is no room? View answer

Answer posted 3 years ago | Vesternet Zigbee High Load Switch

Question 19

Does this unit work with samsung hub ? How can I integrate ? View answer

Asked 3 ´years ago | RFXtrx433XL USB 433.92 MHz transceiver with antenna (NEW model)

Question 20

Philio PAN03 assiciation question View answer

Asked 3 ´years ago | Z-Wave Philio In Wall Switch

Question 21

Placed my order 2 weeks ago. Have not revived it yet. Will I get the new Homey Pro (announced 12 oct) or the old View answer

Asked 3 ´years ago | Athom Homey Pro

Question 22

Hello, when will the product be available? thank you View answer

Asked 3 ´years ago | Z-Wave Plus V2 Heltun High Load Switch

Question 23

Vesternet zigbee motor controller positioning. View answers

Answer posted 3 years ago | Vesternet Zigbee Motor Controller

Question 24

Joint controll of the receiver? View answer

Asked 3 ´years ago | Z-Wave Plus Secure Wall Thermostat & Receiver Set - Gen5

Question 25

Will this sensor work with a Secure SIR321 switch? My SIR321 only has two terminals for the temperature probe. View answer

Asked 4 ´years ago | Z-Wave Secure Pipe Tank Digital Temperature Sensor - 4m Wire

Question 26

Can the SES003 be used with an SIR321 smart switch? View answer

Asked 4 ´years ago | Z-Wave Secure Pipe Tank Digital Temperature Sensor - 4m Wire

Question 27

Can the SES003 be used with an SIR321 smart switch? View answer

Asked 4 ´years ago | Z-Wave Secure Pipe Tank Digital Temperature Sensor - 4m Wire

Question 28

What chipset does this use? 500 series or 700? Thank you. View answer

Answer posted 4 years ago | Vesternet Z-Wave 2 Channel Switch

Question 29

Does this offer pushed and held options (per button) in smart thing giving 8 options to assign in routines? View answer

Asked 4 ´years ago | Zigbee Aduro Scene Remote

Question 30

Modbus View answer

Asked 4 ´years ago | Hubitat Elevation Model C-7 Hub (UK version)

Question 31

Does this have a uk plug ? View answer

Asked 4 ´years ago | Shelly Gas LPG

Question 32

Can I us to automate plug sockets, not light switches? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Dual Nano Switch with Power Metering

Question 33

Does the Aqara single switch module with neutral work with an Aqara E1 hub View answer

Asked 4 ´years ago | Zigbee Aqara Single Switch Module T1 (With Neutral)

Question 34

Will the Z-Wave Qubino Flush Dimmer 0-10V Plus work with Samsung smartthings to control my Ecopac Constant Voltage 0/1-10V Dimmable LED Driver ELED-200-24V 200W 24V

Asked 4 ´years ago | Z-Wave Qubino Flush Dimmer 0-10V Plus

Question 35

Will the switch send instant status updates back to Vera? To answer the review where this wasn't working I ended up finding the solution here https://community.ezlo.com/t/heltun-he-tps04-and-vera-lite-experience/217229

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 36

Why is there no technical documentation on your site for this device? The description and spec is very poor, as well.

Asked 4 ´years ago | Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 37

They were £24.99 before now £34 I'd call that a big difference.

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 38

Managed to put in a workaround but I found with a original style lightbulb it would cut out when I turn the brightness above 60% and then start flashing red. I've updated the config so that max power is 60% as this is just the porch light and I don't really need it that bright in there. But I'm concerned what happens if I purchase more.

Asked 4 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 39

Is this the latest 2020 upgraded model (“Z-Stick Gen5&#43“) that will work with a Raspberry Pi 4 directly without the need for an external USB hub?

Asked 4 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 40

Is this item in stock?

Asked 4 ´years ago | Fibaro Home Center 3

Question 41

I will be building a new house starting in a few months time and I want to implant temperature sensors in the concrete slab. I have 2 questions; firstly in the manual it says this can be burried concrete with the right protection, what would that protection be please?? Secondly, what would you recommend for protecting the string of temp tensors so they can be safely buried in the concrete and what cable would you connect them with ?? Thanks Chris

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 42

I have a British Gas ES1 (Drayton RTS5) thermostat with up to an hour delay on switch-on that requires a press on the ‘Save’ button to bypass the delay. I now have a Secure SRT321 thermostat with a SSR302 boiler control. Although I have turned the ES1 up to the max, I am now subjected to the delay of the ES1 everytime that the SRT321 switches on the heating throughout the day. I am trying to avoid finding the junction box to bridge out the ES1, so would like to reconfigure/bridge the wiring behind the ES1 to cut-out the delay. Has anybody tried this before, or knows how to do it?

Asked 4 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 43

I am looking for a capacitive mono-stable wall switch to be used with a z-wave dimmer module. I'm struggling to find ones which will work as desired as most will not register a long press/hold – instead, they always accept touch as a momentary on/off. What I would like is for it to mimic a mono-stable switch (bell-push) i.e. touch once for on/off and hold for dim up/down, which I know can be set by the Fibaro parameters – but I can't find a capacitive plate wall plate that does this. Note, ideally I'm looking a double switch.

Asked 4 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 44

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 45

Hello Could I use this connected to the 12v bell output (I.e. the +and- terminals) in my house intruder alarm to tell my Samsung SmartThings box that the siren is ringing? This would be a remote alert as lightening frazzled the built-in comms dialler! It’s not clear to me from the manual that I could put the 12v through to say “it’s ringing” and “stopped ringing” when it’s 0v. I am also not clear on whether I will be able to configure it with ST (I don’t have the Fibaro control system), or not. Thank you in advance. Neil

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 46

Z-Wave Fibaro KeyFob working with the Vera plus ?

Asked 4 ´years ago | Z-Wave Fibaro KeyFob

Question 47

Will this work with the new smart gas meters. (EDF have installed a Flonidan branded Smart Gas Meter but it cannot connect to the mobile telephone network so cant get at the data)

Asked 4 ´years ago | Z-Wave Data Logger for E-Meters

Question 48

Will this work with a PWM Immersion heater (ie. one that can very it's power). Other meters give false readings for me when it's on.

Asked 4 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 49

Will this sensor work with an Aeotec Z-Stick V2 (Version: 1.4-2228-gbce4a88-dirty)?

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 50

Will it work with Fibaro (Home Center 2)?

Asked 4 ´years ago | Z-Wave Plus Secure SES303 Temperature & Humidity Sensor Gen5

Browse by Topic

Tools