Switches Q&A

Question 1

Asked 1 ´year ago | Vesternet Zigbee 2 Channel Switch

Question 2

Does Aqara Single Switch Module T1 have UL certification in the USA? View answer

Asked 2 ´years ago | Aqara Single Switch Module T1 (With Neutral)

Question 3

Could this be used to control a hard wired electric towel rail (on/off - no thermostat) via a SmartThings hub View answer

Asked 2 ´years ago | Aqara Single Switch Module T1 (With Neutral)

Question 4

How do I add this to an existing fused spur? View answer

Asked 2 ´years ago | Vesternet Zigbee High Load Switch

Question 5

Can I connect this to a water heater or an air conditioner unit which is rated as 16A? View answer

Asked 2 ´years ago | Vesternet Zigbee High Load Switch

Question 6

does this module support momentary switches? View answer

Asked 2 ´years ago | Aqara Single Switch Module T1 (With Neutral)

Question 7

Does this show energy monitoring / usage on SmartThings v3 like the Fibaro switches? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 8

In Push LV setup are the switch inputs dry contacts? View answer

Asked 2 ´years ago | Vesternet Z-Wave Switch

Question 9

Zwave high load switch View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 10

Can this be paired directly with hue? View answer

Asked 2 ´years ago | NodOn Zigbee 2-Channel 2*3A Switch

Question 11

Echo Dot compatibility View answer

Asked 2 ´years ago | Vesternet Zigbee 2 Channel Switch

Question 12

Can this be used with a 3kw immersion heater, via Philips Hue hub and controlled via Homekit? View answer

Asked 2 ´years ago | Vesternet Zigbee High Load Switch

Question 13

Are firmware updates available for these vesternet devices and if so how are they provided? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 14

I have a 3 wire dimmer, can i use the bypass to stop flicker? View answer

Asked 2 ´years ago | Vesternet Bypass

Question 15

Does this work with Home Assistant? View answer

Asked 2 ´years ago | Vesternet Z-Wave Switch

Question 16

Does this switch feature in the Z-Wave JS database https://devices.zwave-js.io/ for Home Assistant users? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 17

Can add this in line near the extractor fan unit rather than at the fused spur switch as there is no room? View answer

Asked 2 ´years ago | Vesternet Zigbee High Load Switch

Question 18

What chipset does this use? 500 series or 700? Thank you. View answer

Asked 2 ´years ago | Vesternet Z-Wave Commutateur à 2 canaux

Question 19

Hello, when will the product be available? thank you View answer

Asked 2 ´years ago | Z-Wave Plus V2 Heltun High Load Switch

Question 20

Does the Aqara single switch module with neutral work with an Aqara E1 hub View answer

Asked 2 ´years ago | Aqara Single Switch Module T1 (With Neutral)

Question 21

Does this work with an existing Hive installation? Thx! View answer

Asked 2 ´years ago | NodOn Zigbee 1-Channel 16A Switch

Question 22

What sort of housing would you recommend for this? Would a standard UK single pattress box be suitable? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 23

High load switch requires three wires? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 24

Vesternet zigbee switch/dimmer - Compatibility with hue bulbs? View answer

Asked 2 ´years ago | Vesternet Zigbee Switch

Question 25

My gates have a pair of IR photocells. Could I input this to the implant to get a notification when beam is broken? View answer

Asked 2 ´years ago | Z-Wave Fibaro Smart Implant

Question 26

Hi, Regarding the Z-Wave Plus Aeotec Z-Stick 7, it shows âin stock soonâ, what does this mean, do you happen to have more info (eta) on this? Also, I presume when I buy this product the frequency band will be comply with EU (as I am living in Holland)? Thank you in advance! Kr, Daniel View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 27

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion:https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer

Asked 3 ´years ago | Z-Wave Fibaro Double Smart Module

Question 28

Are the contacts in this model 'dry'? I want to use the module to momentarily connect a separate 12VDC circuit. (Mimicking a make/break switch.)Already have many FGS211/FGS221 modules which are dry. But want to make sure there is no change of internal circuitry for this module. View answer

Asked 3 ´years ago | Z-Wave Fibaro Double Switch 2

Question 29

Hi I am unable to get the Fibaro FGS-224 Double Smart Module to work with Samsung SmartThings Hub v3. I have managed to get it to pair with the v3 hub but only as a generic multifunction device. Only one channel works as a switch. Regards Johan View answer

Asked 3 ´years ago | Z-Wave Fibaro Double Smart Module

Question 30

Manual says "Maximum length of wires: 3 meters". Is that really the case and does it apply for both input and output wiring? Thinking of installing these on the DIN rail with Eutonomy housings, but 3-meter cable restriction would make this impossible. View answer

Asked 4 ´years ago | Z-Wave Fibaro Double Smart Module

Question 31

Does this 'smart cable' have a physical power switch, similar to the discontinued Swwidinter zwave cord switches, or is it remote control only.

Asked 4 ´years ago | Zigbee Frient Smart Cable 2

Question 32

What’s the rated inductive load in amps for this? Many thanks. View answer

Asked 4 ´years ago | Zigbee Frient Smart Cable 2

Question 33

Hi, I was wondering if this would work with Economy 7 electricity, meaning does it have an internal battery to keep it on and connected to the network when economy 7 isn't active? I'm wondering if it is possible to make economy 7 storage heaters smarter. Thanks. View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 34

Hi, Would anyone have any schematic diagrams to show how to install this device to arm a hardwired and non-smart alarm system? Thanks View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 35

Could I use this to control a 12.5kw shower View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 36

Hi I would like to install this into a air conditioning/ heating system would you be able to offer me some assistance if I was to supply you with the make and model no of the Ac/ Heating unit ? View answers

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 37

Is the relay single pole or double pole (ie does it switch only the live connection or both L and N connections)? View answer

Asked 4 ´years ago | Z-Wave Heatit Z-Relay - 16A

Question 38

I'm looking for a standalone DC power supply to go with this unit. Does anyone here have any recommendations? View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 39

Hi Are there for 2 or 3 wire systems? Does it need a neutral cable? Kind Regards Juan View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Module

Question 40

Have these yet been proven to work with Vera Edge or Vera Plus? I have installed one and whilst, after hours working on-line (computer and telephone) with a Micaverde technician (or two), the binary function works, we can get no sensible response from the 2 x DS18B20 connected. View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 41

On Fibaro's website for this product it shows it being able to be installed in audio equipment but there are no references to that type of setup in the manual or instructions. Has anyone tried to use the implant in any appliance to make it smart? If so I assume the compatibility will be based on the appliance and the internal wiring if it can be done. View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 42

I bought one of these earlier in the year, am hoping to use to add functionality to an automatic gate opener. I've struggled to get it added into Homeseer correctly, only Output 1 has shown up. Have any Homeseer users had any success getting both outputs to add correctly? If so, any tips? View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 43

Hello Could I use this connected to the 12v bell output (I.e. the +and- terminals) in my house intruder alarm to tell my Samsung SmartThings box that the siren is ringing? This would be a remote alert as lightening frazzled the built-in comms dialler! It’s not clear to me from the manual that I could put the 12v through to say “it’s ringing” and “stopped ringing” when it’s 0v. I am also not clear on whether I will be able to configure it with ST (I don’t have the Fibaro control system), or not. Thank you in advance. Neil

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 44

I will be building a new house starting in a few months time and I want to implant temperature sensors in the concrete slab. I have 2 questions; firstly in the manual it says this can be burried concrete with the right protection, what would that protection be please?? Secondly, what would you recommend for protecting the string of temp tensors so they can be safely buried in the concrete and what cable would you connect them with ?? Thanks Chris

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 45

Does this support pulse counting at hardware level ? I'm looking for something to interface to water flow meters with a pulsed output. It would obviously need to store number of pulses received over a certain time period.

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 46

This appears to be a re-incarnation of the Fibaro Universal Binary Sensor which will not now recognise DS18B20 inputs although it used to do so. Is this unit any the more reliable?

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 47

Hi, When will the Z-Wave Fibaro Double Switch 2 be available in stock? I have been waiting for the appearance of this device around a week( View answer

Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2

Question 48

Hello, you did not mention the frequency of z-wave signal? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 49

Hi, I've recently purchased one of these devices and installed it on my veraplus. Its created the 'Double Switch 2', Q1 Load, and Q2 Load. On the double switch device, its got the status: Failed at: Setting special association. The 2 load switches appear to work ok. Any ideas how to resolve? Thanks View answer

Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2

Question 50

Would this work locally "out of the box" without connecting to a central z-wave controller? I understand remote commands require a controller but would a hardwired momentary switch be able to turn on the load immediately after wiring as well? View answer

Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2

Switches Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools