Z-Wave Fibaro Double Switch 2 Q&A

Question 1

Does the Double Switch 2 support power and energy usage measurement? View answer

Asked 9 ´months ago

Question 2

The Fibaro Double Switch 2 Gen5 will work with vera plus? View answers

Asked 9 ´years ago

Question 3

Does this work with 3 way switched circuits? Can't find a wiring diagram for even 2way switching in the manual. View answer

Asked 8 ´years ago

Question 4

How do I reset my Fibaro double switch?

Asked 9 ´months ago

Question 5

How is the Double Switch 2 module controlled? View answer

Asked 9 ´months ago

Question 6

What is the size advantage of the Double Switch 2? View answer

Asked 9 ´months ago

Question 7

What type of chip does the Double Switch 2 use? View answer

Asked 9 ´months ago

Question 8

Are the contacts in this model 'dry'? I want to use the module to momentarily connect a separate 12VDC circuit. (Mimicking a make/break switch.)Already have many FGS211/FGS221 modules which are dry. But want to make sure there is no change of internal circuitry for this module. View answer

Asked 4 ´years ago

Question 9

Would this work locally "out of the box" without connecting to a central z-wave controller? I understand remote commands require a controller but would a hardwired momentary switch be able to turn on the load immediately after wiring as well? View answer

Asked 7 ´years ago

Question 10

Just read the English installation instructions for the Fibaro FGS 223. They state "The device is designed for installation in a wall switch box of depth not less than 600mm." I'm not sure you can get a back box of that depth in the UK. Does this mean we can't use the device in a standard UK box? View answer

Asked 7 ´years ago

Question 11

I want to use a Fibaro relay to swicth an immersion heater on and off. The load is switched using a double pole relay. Can I simply connect the Fibaro output across the relay energising contacts, or will you need a resistor in series to reduce the current? View answer

Asked 9 ´years ago

Question 12

I have a Homeseer setup and have bought the Fibrao FGS 223. I have managed to include it but want to change the default toggle to momentary switch as that's what I have elsewhere [legacy X10]. I tried Setting Parameter 20 to 0 in homseer z-wave node but it just says error and dosent change. Any help please View answer

Asked 8 ´years ago

Question 13

Hi, When will the Z-Wave Fibaro Double Switch 2 be available in stock? I have been waiting for the appearance of this device around a week( View answer

Asked 6 ´years ago

Question 14

Hi, Just to be sure, will it work flawlessly if using while connected only to a single switch? View answer

Asked 7 ´years ago

Question 15

Hi, I've recently purchased one of these devices and installed it on my veraplus. Its created the 'Double Switch 2', Q1 Load, and Q2 Load. On the double switch device, its got the status: Failed at: Setting special association. The 2 load switches appear to work ok. Any ideas how to resolve? Thanks View answer

Asked 7 ´years ago

Question 16

Hi I is it possible to use this module with a 2 way switch? If so how should I connect/configure it? Thanks View answer

Asked 7 ´years ago

Question 17

Hi - when wired this into a double switch and then included this with a Vera Plus controller there were 3 devices created - the master and 2x appliance modules. In Vera only using the master switch has an affect and it only controls one of the switches. How do I include this so that both switches are controlled? View answer

Asked 8 ´years ago

Question 18

Has anybody seen an issue where the Q outputs don't follow the S inputs? I have to toggle the state of the input switch a few times to get it to sync up. The input switch is the microswitch on my Heating Control Valve. View answer

Asked 8 ´years ago

Question 19

Does this support lower voltage DC like the earlier versions did, or only mains? View answer

Asked 9 ´years ago

Question 20

Does this module need retractive switches too? I'm guessing yes and it needs 2. View answer

Asked 9 ´years ago

Question 21

Does this device work fully with HomeSeer? View answer

Asked 8 ´years ago

Question 22

Can this module be used behind a standard UK Socket and control/monitor it? View answer

Asked 8 ´years ago

Question 23

What are the key features of the Double Switch 2? View answer

Asked 9 ´months ago

Question 24

What is the load rating per channel for the Double Switch 2? View answer

Asked 9 ´months ago

Question 25

How many channels does the Double Switch 2 support? View answer

Asked 9 ´months ago

Question 26

What types of switches are compatible with the Double Switch 2? View answer

Asked 9 ´months ago

Question 27

What installation requirement does the Double Switch 2 have? View answer

Asked 9 ´months ago

Question 28

Can the Double Switch 2 be controlled remotely from anywhere? View answer

Asked 9 ´months ago

Question 29

Is the Double Switch 2 suitable for parents? View answer

Asked 9 ´months ago

Question 30

Can the Double Switch 2 be controlled from mobile devices? View answer

Asked 9 ´months ago

Question 31

Can the Double Switch 2 measure power usage? View answer

Asked 9 ´months ago

Question 32

What is the automated water flow cut-off feature in the Double Switch 2? View answer

Asked 9 ´months ago

Question 33

How does the Double Switch 2 notify about unused devices? View answer

Asked 9 ´months ago

Question 34

What kind of smart notifications does the Double Switch 2 provide? View answer

Asked 9 ´months ago

Question 35

Can the Double Switch 2 manage scenes? View answer

Asked 9 ´months ago

Question 36

Does the Double Switch 2 have an increased signal range? View answer

Asked 9 ´months ago

Question 37

What is the purpose of the built-in RGB diode in the Double Switch 2? View answer

Asked 9 ´months ago

Question 38

Does the Double Switch 2 support secure mode? View answer

Asked 9 ´months ago

Question 39

Hi all, I have installed a couple of these (fgs223) on a 2 way switch. One is an on off switch and the other is a dimmer. I've put the switches behind the on off switch. That bit works well but now the separate dimmer won't dim it only switches on and off. Any suggestions? View answers

Asked 8 ´years ago

Question 40

Hi, I have box with 3 switches controlling 3 lights (one for each). Is it possible to install this module to control one light with S1 and the other 2 lights with S2? the idea is that the controller will open/close the 2 lights together while manually using the physical switches I will still have separate control. Thanks. View answers

Asked 7 ´years ago

Question 41

How can this be set up for two-way circuits? i.e. two switches controlling one light. I can't see a wiring diagram to support this in the manual. View answers

Asked 8 ´years ago

Question 42

Is this device suitable for switching 230V LED lights, or would it be better to use the double relay switch instead? Since it doesn't have dry contacts, I'm wondering if the LEDs may flicker while switched off (as is the case for the dimmer module). View answers

Asked 9 ´years ago

Question 43

What's the difference between this model (FIBEFGS-223) and the FIBEFGS-222? One is described as a switch and the other as a relay, but otherwise seem identical. Does it make any difference to what it can do? I want to use them behind existing light switches to control lighting circuits - does it make any difference which I use? Thanks! View answers

Asked 8 ´years ago

Question 44

Can this control a central heating pump or just resistive load? View answers

Asked 7 ´years ago

Question 45

Hi, I want to use this to control a security light which doesn't have a switch. But it needs S1 to be toggled 3 times for inclusion. Is there anyway to include without this e.g. button B? View answers

Asked 8 ´years ago

Question 46

As far as I know this model like previous models should have "Manager Power" option, but in your site usage it didn't mention it. it realy does not have this option?! View answer

Asked 9 ´years ago

Z-Wave Fibaro Double Switch 2 Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic

Tools