Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer
Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion: https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429 I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer
Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
Does this work with Samsung Smarthings? View answer
Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
If I put the relay on momentary mode and press the momentary switch once (and release), the light that connect to relay output will stay at ON (toggle) till I press the momentry again, is that correct? If so, does it means that for 2 way implementation I just need 2 momentry switches connect in parallel to the same input at the qubino 2 relay and every press on one of the momentry switch will toggle the light to ON or OFF? I can't find such suggestion in you app notes guides. Thank you! View answer
Asked 5 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
I have a fused Switch controlling a fan and want to use this controller to operate the fan remotely as well as enabling the fused switch to continue controlling the fan at the wall, is there a wiring diagram showing how to achieve this? View answers
Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Switch On/Off Controller
Where is the Aeotec bypass? Aeotec's website still says that it will be available "early 2017", and yet here we are here in September and I cannot see much evidence of its availability. Does anyone have any insights into when it will be available? Thanks. View answer
Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Dimmer
Is this Controller working with vera plus? View answer
Asked 8 ´years ago | Z-Wave Qubino Flush Shutter Plus
Asked 9 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
Normally when I think about DIN rails, I think about the 2 pole fuse/breakers in my house consumer unit. Where do these fit in ? Do they go in the same unit, next to the breaker for say the lighting ring/circuit I want to control/dim? Or do you recommend they go into a different unit - away from the main breakers etc? View answer
Asked 9 ´years ago | Z-Wave Qubino Din Dimmer Gen5
Can the Qubino door sensor be connected into this and does it show as a operate sensor in the Z-wave control panel (Vera in my case)? I'm weighting up all my options for controlling a gate and this seems perfect if it runs from 24v and can have the door sensor connected directly into it as well. Less items to need to wire up View answers
Asked 9 ´years ago | Z-Wave Qubino Flush 1D Relay Plus
