Z-Wave - Modules Q&A

Question 1

What chipset does this use? 500 series or 700? Thank you. View answer

Asked 3 ´years ago | Vesternet Z-Wave 2 Channel Switch

Question 2

Can I us to automate plug sockets, not light switches? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Dual Nano Switch with Power Metering

Question 3

What sort of housing would you recommend for this? Would a standard UK single pattress box be suitable? View answer

Asked 3 ´years ago | Vesternet Z-Wave High Load Switch

Question 4

High load switch requires three wires? View answer

Asked 3 ´years ago | Vesternet Z-Wave High Load Switch

Question 5

Is this available in EU frequency? Shows US on the back of the box.Are the relays good for 240V AC? View answer

Asked 4 ´years ago | Z-Wave Plus Zooz Universal Relay

Question 6

Hello, Will the black version be available to buy in the near future? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 7

Did it include the Rechargeable Lithium Battery in the package? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 8

Hi, anyone using it with Athom Homey ? Does it show correctly both the power and energy ? Non-USB version of the UK plug is not showing the power at all .. View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 9

Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 10

Do the Vesternet 2,4 & 8 button z wave wall controllers work with Vera Edge? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 11

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion: https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429 I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 12

Is there is voltage leakage with 3 wire setup or is it only present in 2 wire setup? View answer

Asked 4 ´years ago | Vesternet Z-Wave Dimmer

Question 13

I have several Qubino Mini Dimmer modules in my current set up - HomeSeer with Aeotec Z-Stick controller. Can I substitute one of these for the Qubino module? View answer

Asked 5 ´years ago | Vesternet Z-Wave Dimmer

Question 14

Hello, I have an issue with Hubitat's z-wave range, does this device also function as a z-wave repeater? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 15

Does this work with Samsung Smarthings? View answer

Asked 5 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 16

Is the relay single pole or double pole (ie does it switch only the live connection or both L and N connections)? View answer

Asked 5 ´years ago | Z-Wave Heatit Z-Relay - 25A

Question 17

Hi do you know if these support Triac dimmable as required by these downlights ? https://www.electrical2go.co.uk/jcc-v50-colour-selectable-fixed-fire-rated-led-downlight-7w-650lm-ip65-white.html Thanks Rob View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 18

Could I use this module to control 300w towel radiator View answer

Asked 5 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 19

has anyone tested it with Fibaro Home Center 2? Does it work ok? View answer

Asked 5 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 20

Would this be able to control non dimmable LEDs? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Dual Nano Switch with Power Metering

Question 21

If I put the relay on momentary mode and press the momentary switch once (and release), the light that connect to relay output will stay at ON (toggle) till I press the momentry again, is that correct? If so, does it means that for 2 way implementation I just need 2 momentry switches connect in parallel to the same input at the qubino 2 relay and every press on one of the momentry switch will toggle the light to ON or OFF? I can't find such suggestion in you app notes guides. Thank you! View answer

Asked 6 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 22

Can you measure the energy through the contractor separately from the smart meter unit View answer

Asked 6 ´years ago | Qubino 32A Contactor for Smart Meter

Question 23

How do you set this to simple on/off rather than dimming. I want to use it in the UK with 2 wire circuit, toggle on off switch connected to S1 and non dimmable CFL or LED bulbs View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 24

Can I connect the module N/L to 230V while Q and I1,2,3 are being used with a 24VDC device? View answers

Asked 7 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 25

The description states that this requires a neutral wire, however the single output version of this module does not; so is that correct in the description? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Dual Nano Switch with Power Metering

Question 26

Hi does this product support 2 way switch as well or only 2 single switches? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Dual Nano Switch with Power Metering

Question 27

I have a fused Switch controlling a fan and want to use this controller to operate the fan remotely as well as enabling the fused switch to continue controlling the fan at the wall, is there a wiring diagram showing how to achieve this? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Switch On/Off Controller

Question 28

Does the Aeotec Nano work with 3-Position Momentary Switch - S1, On and Up - S2 Off and Down View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 29

Where is the Aeotec bypass? Aeotec's website still says that it will be available "early 2017", and yet here we are here in September and I cannot see much evidence of its availability. Does anyone have any insights into when it will be available? Thanks. View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 30

Is it possible to use these to control a 240v relay without chatter? We tried this by altering parameters 11,12 and 15 but were not successful. Any advice appreciated. View answer

Asked 8 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 31

Is the common connection a 3v output like the micro modules?

Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 32

When controlled by the local switch, can the level be controlled e.g. press briefly to turn on/off, press and hold to cycle the brightness? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 33

Is this Controller working with vera plus? View answer

Asked 8 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 34

Why do these show as requiring a fuse whereas other like the Fibaro do not show this as a requirement in the wiring diagrams? View answer

Asked 8 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 35

Can this be connected to two bell-push switches, to activate two lighting scenes? The lights would be powered by other zwave modules (dimmers), so these would purely be used to trigger the scenes. View answer

Asked 9 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 36

how do these perform with metal back boxes? Is there a significant reduction in effectiveness / range? View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 37

Is it possible to change colors of the light bulb using smartthings View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 38

Hi. What wireless switch could I use with this dimmer? And do I need a 3rd party device (e.g. Vera or Smartthings) to configure them to talk to each other? View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 39

Hi, will two of these fit in a two gang wall box? I have both pendant and wall lights in my lounge View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 40

Can you confirm that S2 can control a second lighting circuit alongside one on S1? View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 41

In the US they sell a touch display that plugs directly into this module but its the wrong size for the UK. Does anyone know if they will sell a UK version? View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 42

What does the physical switch attached to this device do? does it activate the dimming or does it just enable/disable the whole device? Forgive the naiivety of the question, I'm still a noob at this View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 43

How is this better than the Fibaro Dimmer 2 (which I just bought)? "outperforms all that has come before it" is quite a grand claim - is it just compatible with a broader selection of LED bulbs? View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 44

Which bypass do you recommend & stock, for use with lighting loads below 4 watts? View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 45

Does this have the possibility of manual override in case Z-wave is down? I don´t see a button View answer

Asked 9 ´years ago | Qubino 32A Contactor for Smart Meter

Question 46

It says "For use with Qubino Smart Energy Meter". Is the Smart Meter a requirement to use this contactor or can it be used without it? View answers

Asked 9 ´years ago | Qubino 32A Contactor for Smart Meter

Question 47

Does anyone know if this unit is stable with HomeSeer? I have a couple of the Fibaro Dual Relay units but their status reporting is flaky at best and I cannot rely on them. - Thanks! View answer

Asked 9 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 48

Can this unit be controlled by other Z-wave controllers? Is the Smart Meter required for it to function?

Asked 9 ´years ago | Qubino 32A Contactor for Smart Meter

Question 49

Can someone explain dry / volrage free contacts? Trying to decide which module to use for controlling some outside lights. View answers

Asked 9 ´years ago | Z-Wave Qubino Flush 1D Relay Plus

Question 50

In the manual it says 'Electrical installation must be protected by directly associated over current protection fuse 4A, gG or Time lag T....'. How can I do this? View answers

Asked 9 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Z-Wave - Modules Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools