Z-Wave - Sensors - Multipurpose, Motion, Light Level / Lux Q&A

Question 1

What is the battery life of the sensor? View answer

Asked 6 ´months ago | Z-Wave Plus Aeotec MultiSensor 7

Question 2

What type of power options does the sensor have? View answer

Asked 6 ´months ago | Z-Wave Plus Aeotec MultiSensor 7

Question 3

What is the operating humidity range for the sensor? View answer

Asked 6 ´months ago | Z-Wave Plus Aeotec MultiSensor 7

Question 4

What are the dimensions of the sensor? View answer

Asked 6 ´months ago | Z-Wave Plus Aeotec MultiSensor 7

Question 5

What is the color of the sensor? View answer

Asked 6 ´months ago | Z-Wave Plus Aeotec MultiSensor 7

Question 6

What settings can optimize battery life for the Aeotec MultiSensor or similar Z-Wave devices? View answer

Asked 6 ´months ago | Z-Wave Plus Aeotec MultiSensor 7

Question 7

How to pair aeotec MultiSensor 7? View answer

Asked 6 ´months ago

Question 8

How do I reset my Z-Wave sensor? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 9

How can I tell if a motion sensor is working? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 10

How do I connect my Fibaro motion sensor? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 11

How do you use motion detection? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 12

How long should a motion sensor last? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 13

Which sensor is best for motion detection? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 14

How to wake up a Fibaro motion sensor? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 15

What is the battery life of the fibaro motion sensor? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 16

How to setup FIBARO? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 17

Can motion sensor sensitivity be adjusted? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 18

Does the sensor support custom scenarios for home automation? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 19

Can you adjust the sensitivity of the motion detection? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 20

Does the sensor have an LED light feature? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 21

Does the sensor notify you about movement when you're away? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 22

Can the sensor be used to count guests? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 23

Can the sensor detect motion? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 24

Does the sensor have a temperature correction feature? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 25

Is the sensor compatible with VERA? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 26

Is the sensor Z-Wave Plus certified? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 27

What are the features of the sensor? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 28

What technology does the sensor use? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 29

What type of power does the sensor use? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 30

What is the color of the sensor? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 31

What is the diameter of the sensor? View answer

Asked 6 ´months ago | Z-Wave Fibaro Multi Sensor

Question 32

what is the operating frequency View answer

Asked 1 ´year ago | Z-Wave Plus Aeotec MultiSensor 7

Question 33

I saw it's supported by Athom Homey. However Homey doesn't have an Zooz app. How should it be connected then? View answer

Asked 2 ´years ago | Z-Wave Plus Zooz Universal Relay

Question 34

If powered by USB, can the batteries be left in to cover a power failure? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 35

My gates have a pair of IR photocells. Could I input this to the implant to get a notification when beam is broken? View answer

Asked 3 ´years ago | Z-Wave Fibaro Smart Implant

Question 36

Is this available in EU frequency? Shows US on the back of the box.Are the relays good for 240V AC? View answer

Asked 3 ´years ago | Z-Wave Plus Zooz Universal Relay

Question 37

Hi, I wonder if I can connect this strip directly to the wire? I don't see in the advertisement any explanation how can I connect this strip. I would also like to make sure this strip can work directly with Smartthings and will not require additional hub. Regards, Gal View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 38

What Z-wave frequencies does the model you are selling work on ?I'm after one that will work in Aus (919.8 MHz, 921.4 MHz) View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 39

Can't add this to Homeseer - just errors on Addnode.Also, previously with version 6 I have a poe splitter to power it.With this version it doesn't seem to work and a USB to micro usb is supplied. Presumably I need to poe split differently??? ( not entirely sure why it doesn't power ) View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 40

Sensor 6 has several flaws. Reset button link via a piece of dodgy plastic, poor light level reading, poor UV reading.Apart from these, it was very good. Have they been addressed in Sensor 7? E.G. What range is read for the light level?Can I trust the reset mechanism? Can I assume it will work well with RaZberry? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 41

Is it support EU frequency (868.42)? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 42

Is it resistant to condensation/waterproof? What is the operating humidity range? View answer

Asked 4 ´years ago | Z-Wave Fibaro Multi Sensor

Question 43

How close does the door open sensor need to be to the main unit? View answer

Asked 4 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 44

As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks! View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 45

Hi, Would anyone have any schematic diagrams to show how to install this device to arm a hardwired and non-smart alarm system? Thanks View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 46

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 47

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 48

Hi I would like to install this into a air conditioning/ heating system would you be able to offer me some assistance if I was to supply you with the make and model no of the Ac/ Heating unit ? View answers

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 49

I'm looking for a standalone DC power supply to go with this unit. Does anyone here have any recommendations? View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 50

Why does the Aeotec Multi 6 report a 23 lux when my Philips Hue sensor reports 14606 lux in virtually the same position. I've tried it with 3 Aeotec Multi 6s now with the same sort of difference, I'm concerned because I want to use to switch on lighting when required? They even report 0 lux when there is enough light to read a book! View answers

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Z-Wave - Sensors - Multipurpose, Motion, Light Level / Lux Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools