The VES-ZB-REM-013 is a Zigbee Remote Control and offers the following features:
- Four buttons labelled 1 - 4 with simple on / off markings
- Two buttons labelled with S1 & S2
- Two buttons with simple on / off markings
- Pushed, held and released events for buttons 1 - 4
- Pushed events for buttons S1 & S2
- Main On / Off buttons sends pushed event for buttons 1 - 4 simultaneously
- Candy-bar shape design
- Indicator LED
- Long life CR2450 Battery
- Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges
A manual for this device can be downloaded here.
Vesternet Zigbee Herdsman Converters
These are officially available via the Zigbee2MQTT codebase, meaning that with a recent Zigbee2MQTT installation Vesternet Zigbee devices should work out-of-the-box in Home Assistant.
Please report any issues with the Vesternet Zigbee Herdsman Converters by submitting a technical request ticket.
This Vesternet Device has the following features when used with our supporting Herdsman Converter in Zigbee2MQTT (tested with Zigbee2MQTT version 1.30.1).
- Supports On, Off, Brightness Move Up, Brightness Move Down and Brightness Stop Events for each Group of buttons 1 | 0.
- Supports Secene Recall 1 and Scene Recall 2 Events for buttons S1 | S2.
- Top master buttons send On and Off Events for all Groups.
- Reports Battery Level Events.