Skip to content
US Express $10 Delivery. Shipping Zigbee & Z-Wave (US 908.42)
Eutonomy euFIX Adapter DIN for Fibaro Smart Module (with Push-Buttons)

Eutonomy euFIX Adapter DIN for Fibaro Smart Module (with Push-Buttons)

by Eutonomy
SKU S214
$30.87 - $30.87
$30.87
$30.87 - $30.87
$30.87

In stock iconIn Stock

Eutonomy Adapter DIN for Fibaro Smart Module FGS-214 with push-buttons is used to install the Fibaro Smart Module FGS-214 module on DIN TH35/TS35 type rail in the electrical switchboard.

  • DIN for Fibaro Smart Module FGS-214 with push-buttons
  • Used to install the Fibaro Smart Module FGS-214 module on DIN TH35/TS35 type rail in the electrical switchboard
  • The euFIX S214 Adapter consists of the case and the base board
  • The dimensions of the case are appropriate for a standard DIN TH35/TS35 type rail
  • Micro-push-buttons S1 & S2 used for control, inclusion of the module within the Z-Wave system or to remove it from the system without opening the adapter's case
  • Available in simplified S214NP version without push buttons

euFIX. DIN TH35 rail adapters for Fibaro modules

Eutonomy euFIX are adapters for Fibaro modules which help you to install and maintain system which require mounting Fibaro modules inside electric rack.

Eutonomy euFIX are available for the following Fibaro modules: FGD-212, FGR-222, FGS-212, FGS-213, FGS-222, FGS-223, FGS-214 and FGS-224. All euFIX adapters are available in 2 versions: with or without buttons.

euFIX S214

The Eutonomy euFIX S214 Adapter is used to install the Fibaro Smart Module FGS-214 module (sold separately) on DIN TH35/TS35 type rail in the electrical switchboard.

The euFIX S214 Adapter consists of the case and the base board, where the FGS-214 module is mounted. The dimensions of the case are appropriate for a standard DIN TH35/TS35 type rail.

The base board contains a set of screw terminals, where all the wires (power supply, input and output signals, control push-buttons) can be safely connected. The front panel of the case contains two diagnostics micro-push-buttons S1 & S2, which can be used to control the module, to register the module within the Z-Wave system or to remove it from the system without opening the adapter's case.

The simplified S214NP variation (available separately) does not have the micro-push-buttons.

 

Front and side view of the euFIX S214 Adapter (dimensions are given in mm):

Technical Details

  • Supply voltage: 230 V AC +/-10%, 50–60 Hz
  • Load current: max 10 A (resistive load)
  • Dimensions: 34.8 x 87.3 x 64.7 mm
  • Width in TE module units: 2 TE modules
  • Conductor wires cross section: max. 2.5 mm2
  • Maximum length of wires connected to Sx, S1, S2 inputs: 20 m
  • Operating temperature: 0°C to +50°C
  • Relative humidity: ≤90%, no condensation
Included in this product:
Learn more:
We ship worldwide... simply add products to cart to see real time shipping prices & delivery times based on weight and location.

If you’re not 100% satisfied with your purchase you can return any unused products within 365 days.

If you have problems with a new purchase, our support team will work with you to resolve. And if you still have any concerns you can return it within 14 days for replacement or refund.