Vesternet Z-Wave Remote Control (12 Button) - Technical Support - Home Assistant - Z-Wave JS

The VES-ZW-REM-010 is a Z-Wave Wall Remote Control and offers the following features:

  • Ten buttons with simple on / off markings
  • Two buttons marked S1 & S2
  • Pushed, held and released events for each button
  • Candy-bar shape design
  • Indicator LED
  • Long life CR2450 Battery
  • Z-Wave Plus with S2 Security

 

A manual for this device can be downloaded here.

Vesternet Z-Wave Device Configuration Files

These are officially available via the are officially available via the Z-Wave JS codebase, meaning that with a recent Z-Wave JS installation Vesternet Z-Wave devices should work out-of-the-box in Home Assistant.

Sometimes changes to the device configuration files can take a while to appear in the official Z-Wave JS codebase, so you can also download them direct from our Github repository

Adding device configuration files manually is possible via Z-Wave JS UI if you have that available, simply navigate to your config location and create a file there, pasting in the code where appropriate.

More information on this is available in the Z-Wave JS UI documentation.

Please report any issues with the Vesternet Z-Wave Device Configuration Files by submitting a technical request ticket.

This Vesternet Device has the following features when used with our supporting Device Configuration File in Z-Wave JS (tested with Z-Wave JS UI / Z-Wave JS version 8.8.6 / 10.10.0).

  • Supports Pushed, Held, and Released Events for all buttons.
  • Reports Battery Level Events.
  • Can be used as a "Trigger" for Pushed, Held, and Released Events in Logic.