Frequently bought together
Z-Wave Popp Smoke detector is the world's first VdS and EN14604 certified smoke sensor that monitors smoke levels and triggers a loud alarm in case of events like fire. The sensor can be used as a part of your Z-Wave security network to trigger pre-configured actions in case of a fire and can even be used as a standalone device.
The Z-Wave smoke detector detects resulting fire and smoke emission reliable. In case of emergency it alarms acoustically and sends alarm signal to Z-Wave network so that all other smoke detectors in range can be alarmed. That ensures that the alert also reaches people in all floors as well as in the night while they are sleeping.
Thanks to Z-Wave wireless technology you can define further actions triggered by the smart home control center in case of an alarm. To enhance safety, escape routes can be highlighted with automated lighting and unlocking or locking of shutters and doors.
In case smoke is detected by the smoke detector the device will sound, the red LED will blink and the wireless module will issue a Z-Wave alarm command to the main controller and other associated devices. A low battery will be indicated on short siren noise plus the Z-Wave controller will be informed using Battery Low warning commands.
The Z-Wave smoke detector can be used as an independent indoor siren which can be integrated into an existing security system. Within your Z-Wave smart home network the smoke detector can be connected to other sensors such as door and window contacts or motion sensors independently from a control center. In case of an alarm the acoustic signal will be different from the signal in case of fire.
Z-Wave Popp Smoke detector is extremely easy-to-install and comes with auto-calibration and auto-testing capabilities, which makes getting started with the device simple, easy, and convenient. It also comes with tamper-proof protection, wherein the device communicates to Z-Wave controller and triggers a loud alarm in case the device is tinkered without notice.
The Z-Wave Popp Smoke detector is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information
- Frequency: 868.42 MHz (SRD Band)
- Wireless Range: Up to 100 m outside, on average up to 20 m inside buildings
- IP Rating: IP 20, VdS-Number: C208090
- CPD Number: 0789-CPD-20474
- Battery Type: 1 * 9 V Block
- Explorer Frame Support: No
- Device Type: Slave with routing capabilities
- Generic Device Class Alarm sensor
- Routing: No
- FLiRS: Yes
- Firmware Version 0.48
Application Notes, Guides and Videos
4 months ago