translation missing: en.general.accessibility.skip_to_content
Access Technical Experts

Access Technical Experts

100's of Free Guides

100's of Free Guides

365 Day Guarantee

365 Day Guarantee

Z-Wave & Zigbee Specialists

Z-Wave & Zigbee Specialists

Vesternet Devices

VES-ZB-SWI-005 2-Wire Capable Switch

Vesternet Hardware Devices offer many advantages over products from other manufacturers, including hassle free returns, 3 year warranty, lifetime controller compatibility, technical support and dedicated user guides.

These devices have been carefully curated and we support them in the Aeotec SmartThings, Athom Homey and Hubitat Elevation Smart Home Controllers.

We've also ensured that all our Hardware Devices are available in both Zigbee and Z-Wave versions, meaning that you can mix-and-match across both technologies while maintaining a consistent hardware style.

Contents

Zigbee Devices

Zigbee is an open standard for a low-cost, low-power, wireless mesh network targeted at the wide development of devices for wireless control and monitoring applications. By building on top of the physical layer and media access control defined in the IEEE standard 8.2.15.4 it natively supports mesh networking as well as offering secure communications by default.

Backed by some of the worlds biggest companies, including Philips, Nest, Samsung, Texas, Siemens & Whirlpool, Zigbee technology is currently being built into millions of Smart Home Devices worldwide. Lights, thermostats, alarms, fridges, doors, appliances, utility meters - all are being Zigbee enabled. Recently the likes of Amazon, Apple and Google have all begun to integrate Zigbee into their Smart Speakers and Smart Screens too!

With Zigbee based devices you get a robust, resilient and self-managing system. Zigbee devices are often much simpler than their Z-Wave counterparts, preferring to focus on specific tasks such as motion sensing or dimming a light, rather than trying to combine lots of different functionality into one device.

More information on Zigbee can be found in our guide here.

At Vesternet we're currently offering three Zigbee Devices in our Hardware range, a 2-Wire Capable Switch, a 2-Wire Capable Dimmer and a 1 Zone Wall Controller.

These have been fully tested and are fully working in the SmartThings, Athom and Hubitat Smart Home Controllers.

SmartThings

The SmartThings Smart Home Controller needs a "Device Handler" for each hardware Zigbee Device that you wish to use so that it functions correctly. A Device Handler is a piece of software / code written in the Groovy programming language and these are created by SmartThings themselves, by manufacturers of Zigbee hardware devices or by the SmartThings Community.

Vesternet Zigbee hardware is no different in this respect, but fortunately for the end user we've created our own Device Handlers for our full range of Zigbee hardware. This means that you don't need to search and scour the web to try and find code and information in getting the Device to work!

While Vesternet Zigbee devices may work with the generic Device Handlers provided, for best compatibility with the SmartThings Smart Home Controller we recommend that you use our supporting Device Handler.

Hubitat

Similar to SmartThings, the Hubitat Smart Home Controller needs "Device Drivers" for each hardware Zigbee Device that you wish to use. These are written by Hubitat themselves, by manufacturers of Zigbee hardware devices, or by Community members. The Groovy programming language is used to write these pieces of software / code.

Vesternet Zigbee hardware is no different in this respect, but fortunately for the end user we've created our own Device Drivers for our full range of Zigbee hardware. This means that you don't need to search and scour the web to try and find code and information in getting the Device to work!

While Vesternet Zigbee devices may work with the generic Device Drivers provided, for best compatibility with the Hubitat Smart Home Controller we recommend that you use our supporting Device Driver.

Athom

Athom takes a slightly different approach with regards to device compatibility where individual Plugins / Apps are installed to handle specific sets of devices - for example to add support for Aqara Zigbee devices you install the Aqara Plugin / App, to add support for Philips Hue Zigbee devices you add the Philips Hue Plugin / App... you get the idea!

This means that compatibility for devices can be added by the official Athom developers or by third party developers (maybe even the device manufacturer themselves), or even by both (competition is never a bad thing). It also means that compatibility is a simple case of a Plugin / App install or a Plugin / App update.

Vesternet Zigbee hardware is no different in this respect, but fortunately for the end user we've created our own Plugin / App for our full range of Zigbee hardware. This means that you don't need to search and scour the web to try and find code and information in getting the Device to work!

For best compatibility with the Athom Smart Home Controller we recommend that you use our supporting Plugin / App.

....back

Vesternet Zigbee 2-Wire Capable Switch (VES-ZB-SWI-005)

Vesternet Zigbee 2-Wire Capable Switch (VES-ZB-SWI-005)

The VES-ZB-SWI-005 is a Zigbee 2-Wire Capable Switch and offers the following features:

  • 2-Wire (without Neutral) or 3-Wire (with Neutral) wiring and optional Bypass for flexible installation possibilities
  • Supports Momentary Switches
  • 4.8A Resistive Load (1.4A Capacitive / Inductive Load)
  • Small Installation Size 45.5 x 45 x 20.3 mm
  • Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges

A manual for this device can be downloaded here.

SmartThings

To ease your journey with Vesternet Zigbee hardware, a full user manual for using this device in the SmartThings Smart Home Controller is available here.

If you're already familiar with SmartThings then you can simply get stuck in using the Device Handler below!

Vesternet Zigbee Device Handlers

Available here.

One file is required for this particular Device:

  • VES-ZB-SWI-005 2-Wire Capable Switch.groovy

This Vesternet Zigbee Device has the following features when used with our supporting Device Handler in the SmartThings Smart Home Controller (tested with SmartThings firmware version 000.032.00012).

  • Supports On and Off Control from the App.
  • Reports On and Off Events when operated from the local switch.
  • Allows assigning of "Actions" for On and Off Control from the Device Details section of the App.
  • Allows adding of "Automations" for On and Off Events from the Automations section of the App.
  • Allows adding of "Automations" for On and Off Control from the Automations section of the App.

Hubitat

If you're already familiar with Hubitat then you can simply get stuck in using the Device Handler below!

Vesternet Zigbee Device Drivers

Available here.

One file is required for this particular Device:

  • VES-ZB-SWI-005 2-Wire Capable Switch.groovy

This Vesternet Zigbee Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports On and Off Control from the Web UI.
  • Reports On and Off Events when operated from the local switch.
  • Can be used as a "Trigger" for On and Off Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Can be used as an "Action" for On and Off Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.

Athom

Vesternet Hardware Devices are supported via the Vesternet App which is installable from the Athom App Store.

Vesternet App

Available here.

Simply click "install" to automatically download and install the App onto your Athom Homey Smart Home Controller!

This Vesternet Zigbee Device has the following features when used with our supporting App in the Athom Homey Smart Home Controller (tested with Athom firmware version 6.0.0-rc.4).

  • Supports On and Off Control from the App.
  • Reports On and Off Events when operated from the local switch.
  • Can be used as a "Trigger" for On and Off Events in Flows.
  • Can be used as an "Action" for On and Off Control in Flows.

....back


Vesternet Zigbee 2-Wire Capable Dimmer (VES-ZB-DIM-004)

Vesternet Zigbee 2-Wire Capable Dimmer (VES-ZB-DIM-004)

The VES-ZB-DIM-004 is a Zigbee 2-Wire Capable Dimmer and offers the following features:

  • 2-Wire (without Neutral) or 3-Wire (with Neutral) wiring and optional Bypass for flexible installation possibilities
  • Supports Momentary Switches
  • 1.8A Resistive Load (0.8A Capacitive / Inductive Load)
  • Small Installation Size 45.5 x 45 x 20.3 mm
  • Trailing Edge Dimming For Good Compatibility with LEDs
  • Power, Energy, Voltage & Current Metering
  • Soft Start
  • Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges

A manual for this device can be downloaded here.

SmartThings

To ease your journey with Vesternet hardware, a full user manual for using this device in the SmartThings Smart Home Controller is available here.

If you're already familiar with SmartThings then you can simply get stuck in using the Device Handler below!

Vesternet Zigbee Device Handlers

Available here.

One file is required for this particular Device:

  • VES-ZB-DIM-004 2-Wire Capable Dimmer.groovy

This Vesternet Device has the following features when used with our supporting Device Handler in the SmartThings Smart Home Controller (tested with SmartThings firmware version 000.032.00012).

  • Supports On, Off and Dimming Control from the App.
  • Reports On, Off and Dimming Events when operated from the local switch.
  • Reports Power, Energy and Voltage Meters (SmartThings doesn't currently support the Current capability).
  • Allows assigning of "Actions" for On and Off Control from the Device Details section of the App.
  • Allows adding of "Automations" for On, Off, Dimming and Meter Events from the Automations section of the App.
  • Allows adding of "Automations" for On, Off and Dimming Control from the Automations section of the App.
  • Has configuration options for Meter reporting.

Hubitat

If you're already familiar with Hubitat then you can simply get stuck in using the Device Handler below!

Vesternet Zigbee Device Drivers

Available here.

One file is required for this particular Device:

  • VES-ZB-DIM-004 2-Wire Capable Dimmer.groovy

This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports On, Off and Dimming Control from the Web UI.
  • Reports On, Off and Dimming Events when operated from the local switch.
  • Reports Power, Energy, Current and Voltage Meters.
  • Can be used as a "Trigger" for On, Off, Dimming and Meter Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Can be used as an "Action" for On and Off and Dimming Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Has configuration options for Meter reporting.

Athom

Vesternet Hardware Devices are supported via the Vesternet App which is installable from the Athom App Store.

Vesternet App

Available here.

Simply click "install" to automatically download and install the App onto your Athom Homey Smart Home Controller!

This Vesternet Zigbee Device has the following features when used with our supporting App in the Athom Homey Smart Home Controller (tested with Athom firmware version 6.0.0-rc.4).

  • Supports On, Off and Dimming Control from the App.
  • Reports On and Off and Dimming Events when operated from the local switch.
  • Can be used as a "Trigger" for On, Off and Dimming Events in Flows.
  • Can be used as an "Action" for On, Off and Dimming Control in Flows.

....back


Vesternet Zigbee 1 Zone Wall Controller (VES-ZB-WAL-006)

Vesternet Zigbee 1 Zone Wall Controller (VES-ZB-WAL-006)

The VES-ZB-WAL-006 is a Zigbee Wall Controller / Remote Control and offers the following features:

  • Two buttons with simple on / off markings
  • Pushed, held and released events for each button
  • Standard 80mm x 80mm form factor with sticky pad or screw mounting
  • Indicator LED
  • Long life CR2450 Battery
  • Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges

A manual for this device can be downloaded here.

SmartThings

To ease your journey with Vesternet hardware, a full user manual for using this device in the SmartThings Smart Home Controller is available here.

If you're already familiar with SmartThings then you can simply get stuck in using the Device Handler below!

Vesternet Zigbee Device Handlers

Available here.

Two files are required for this particular Device:

  • Vesternet VES-ZB-WAL-006 1 Zone Wall Controller.groovy
  • Vesternet VES-ZB-WAL-006 1 Zone Wall Controller Child Button.groovy

This Vesternet Device has the following features when used with our supporting Device Handler in the SmartThings Smart Home Controller (tested with SmartThings firmware version 000.032.00012).

  • Supports Pushed, Held, and Released Events for both buttons (SmartThings doesn't offer an Event for "Released" so our Device Handler utilises the "Double Pushed" Event instead).
  • Reports battery level in the Device Details section of the App
  • Allows assigning of "Actions" for all button Events from the Device Details section of the App.
  • Allows adding of "Automations" for the battery level from the Automations section of the App.

Hubitat

If you're already familiar with Hubitat then you can simply get stuck in using the Device Handler below!

Vesternet Zigbee Device Drivers

Available here.

One file is required for this particular Device:

  • Vesternet VES-ZB-WAL-006 1 Zone Wall Controller.groovy

This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports Pushed, Held, and Released Events for both buttons.
  • Reports Battery Level Events.
  • Can be used as a "Trigger" for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.

Athom

Vesternet Hardware Devices are supported via the Vesternet App which is installable from the Athom App Store.

Vesternet App

Available here.

Simply click "install" to automatically download and install the App onto your Athom Homey Smart Home Controller!

This Vesternet Zigbee Device has the following features when used with our supporting App in the Athom Homey Smart Home Controller (tested with Athom firmware version 6.0.0-rc.4).

  • Supports On, Off, Move Level and Stop Level Events.
  • Reports Battery Level Events.
  • Can be used as a "Trigger" for On, Off, Move Level and Stop Level Events in Flows.

....back


Z-Wave Devices

Z-Wave is a wireless communication technology that uses reliable, low-power radio waves that easily travel through walls, floors and furniture, meaning you don't have to rip-up carpets and floors to add new wiring.

Features such as two-way communication, status updates and mesh networking combine together to ensure reliability and resiliency in your Home Automation system - no more wondering whether the light in your garage really turned off when you closed the door!

Using Z-Wave enables you to easily create a modern smart home, giving you control of your lights, appliances, heating, security and multimedia at the touch of a button.

More information on Z-Wave can be found in our guide here.

At Vesternet we're currently offering three Z-Wave Devices in our Hardware range, a 2-Wire Capable Switch, a 2-Wire Capable Dimmer and a 1 Zone Wall Controller.

These have been fully tested and are fully working in the SmartThings, Athom and Hubitat Smart Home Controllers.

SmartThings

The SmartThings Smart Home Controller needs a "Device Handler" for each hardware Z-Wave Device that you wish to use so that it functions correctly. A Device Handler is a piece of software / code written in the Groovy programming language and these are created by SmartThings themselves, by manufacturers of Z-Wave hardware devices or by the SmartThings Community.

Vesternet Z-Wave hardware is no different in this respect, but fortunately for the end user we've created our own Device Handlers for our full range of Z-Wave hardware. This means that you don't need to search and scour the web to try and find code and information in getting the Device to work!

While Vesternet Z-Wave devices may work with the generic Device Handlers provided, for best compatibility with the SmartThings Smart Home Controller we recommend that you use our supporting Device Handler.

Hubitat

Similar to SmartThings, the Hubitat Smart Home Controller needs "Device Drivers" for each hardware Z-Wave Device that you wish to use. These are written by Hubitat themselves, by manufacturers of Z-Wave hardware devices, or by Community members. The Groovy programming language is used to write these pieces of software / code.

Vesternet Z-Wave hardware is no different in this respect, but fortunately for the end user we've created our own Device Drivers for our full range of Z-Wave hardware. This means that you don't need to search and scour the web to try and find code and information in getting the Device to work!

While Vesternet Z-Wave devices may work with the generic Device Drivers provided, for best compatibility with the Hubitat Smart Home Controller we recommend that you use our supporting Device Driver.

Athom

Athom takes a slightly different approach with regards to device compatibility where individual Plugins / Apps are installed to handle specific sets of devices - for example to add support for Fibaro Z-Wave devices you install the Fibaro Plugin / App, to add support for Aeotec Z-Wave devices you add the Aeotec Plugin / App... you get the idea!

This means that compatibility for devices can be added by the official Athom developers or by third party developers (maybe even the device manufacturer themselves), or even by both (competition is never a bad thing). It also means that compatibility is a simple case of a Plugin / App install or a Plugin / App update.

Vesternet Z-Wave hardware is no different in this respect, but fortunately for the end user we've created our own Plugin / App for our full range of Z-Wave hardware. This means that you don't need to search and scour the web to try and find code and information in getting the Device to work!

For best compatibility with the Athom Smart Home Controller we recommend that you use our supporting Plugin / App.

....back

Vesternet Z-Wave 2-Wire Capable Switch (VES-ZW-SWI-002)

Vesternet Z-Wave 2-Wire Capable Switch (VES-ZW-SWI-002)

The VES-ZW-SWI-002 is a Z-Wave 2-Wire Capable Switch and offers the following features:

  • 2-Wire (without Neutral) or 3-Wire (with Neutral) wiring and optional Bypass for flexible installation possibilities
  • Configurable for Momentary or Toggle Switches
  • 4.8A Resistive Load (1.4A Capacitive / Inductive Load)
  • Small Installation Size 45.5 x 45 x 20.3 mm
  • Temperature Emergency Shutoff Protection
  • Power Failure Load State Remembering
  • Z-Wave Plus with S2 Security

A manual for this device can be downloaded here.

SmartThings

To ease your journey with Vesternet Z-Wave hardware, a full user manual for using this device in the SmartThings Smart Home Controller is available here.

If you're already familiar with SmartThings then you can simply get stuck in using the Device Handler below!

Vesternet Z-Wave Device Handlers

Available here.

One file is required for this particular Device:

  • VES-ZW-SWI-002 2-Wire Capable Switch.groovy

This Vesternet Z-Wave Device has the following features when used with our supporting Device Handler in the SmartThings Smart Home Controller (tested with SmartThings firmware version 000.032.00012).

  • Supports On and Off Control from the App.
  • Reports On and Off Events when operated from the local switch.
  • Allows assigning of "Actions" for On and Off Control from the Device Details section of the App.
  • Allows adding of "Automations" for On and Off Events from the Automations section of the App.
  • Allows adding of "Automations" for On and Off Control from the Automations section of the App.
  • Has configuration options for the default load state after power failure and for the local switch type.

Hubitat

If you're already familiar with Hubitat then you can simply get stuck in using the Device Handler below!

Vesternet Z-Wave Device Drivers

Available here.

One file is required for this particular Device:

  • Vesternet VES-ZW-SWI-002 2-Wire Capable Switch.groovy

This Vesternet Z-Wave Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports On and Off Control from the Web UI.
  • Reports On and Off Events when operated from the local switch.
  • Can be used as a "Trigger" for On and Off Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Can be used as an "Action" for On and Off Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Has configuration options for the default load state after power failure and for the local switch type.

Athom

Vesternet Hardware Devices are supported via the Vesternet App which is installable from the Athom App Store.

Vesternet App

Available here.

Simply click "install" to automatically download and install the App onto your Athom Homey Smart Home Controller!

This Vesternet Z-Wave Device has the following features when used with our supporting App in the Athom Homey Smart Home Controller (tested with Athom firmware version 6.0.0-rc.4).

  • Supports On and Off Control from the App.
  • Reports On and Off Events when operated from the local switch.
  • Can be used as a "Trigger" for On and Off Events in Flows.
  • Can be used as an "Action" for On and Off Control in Flows.

....back


Vesternet Z-Wave 2-Wire Capable Dimmer (VES-ZW-DIM-001)

Vesternet Z-Wave 2-Wire Capable Dimmer (VES-ZW-DIM-001)

The VES-ZW-DIM-001 is a Z-Wave 2-Wire Capable Dimmer and offers the following features:

  • 2-Wire (without Neutral) or 3-Wire (with Neutral) wiring and optional Bypass for flexible installation possibilities
  • Configurable for Momentary or Toggle Switches
  • 1.8A Resistive Load (0.8A Capacitive / Inductive Load)
  • Small Installation Size 45.5 x 45 x 20.3 mm
  • Smart Light Source Detection (Trailing / Leading Edge Dimming)
  • Power, Energy, Voltage & Current Metering
  • Soft Start
  • Temperature Emergency Shutoff Protection
  • Power Failure Load State Remembering
  • Z-Wave Plus with S2 Security

A manual for this device can be downloaded here.

SmartThings

To ease your journey with Vesternet Z-Wave hardware, a full user manual for using this device in the SmartThings Smart Home Controller is available here.

If you're already familiar with SmartThings then you can simply get stuck in using the Device Handler below!

Vesternet Z-Wave Device Handlers

Available here.

Two files are required for this particular Device:

  • VES-ZW-DIM-001 2-Wire Capable Dimmer.groovy
  • VES-ZW-DIM-001 2-Wire Capable Dimmer Child Button.groovy

This Vesternet Z-Wave Device has the following features when used with our supporting Device Handler in the SmartThings Smart Home Controller (tested with SmartThings firmware version 000.032.00012).

  • Supports On, Off and Dimming Control from the App.
  • Reports On, Off and Dimming Events when operated from the local switch.
  • Reports Power, Energy and Voltage Meters (SmartThings doesn't currently support the Current capability).
  • Allows assigning of "Actions" for On and Off Control from the Device Details section of the App.
  • Allows adding of "Automations" for On, Off, Dimming and Meter Events from the Automations section of the App.
  • Allows adding of "Automations" for On, Off and Dimming Control from the Automations section of the App.
  • Has configuration options for the default load state after power failure and for the local switch type.

Hubitat

If you're already familiar with Hubitat then you can simply get stuck in using the Device Handler below!

Vesternet Z-Wave Device Drivers

Available here.

One file is required for this particular Device:

  • Vesternet VES-ZW-DIM-001 2-Wire Capable Dimmer.groovy

This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports On, Off and Dimming Control from the Web UI.
  • Reports On, Off and Dimming Events when operated from the local switch.
  • Reports Power, Energy, Current and Voltage Meters.
  • Can be used as a "Trigger" for On, Off, Dimming and Meter Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Can be used as an "Action" for On and Off and Dimming Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Has configuration options for the default load state after power failure and for the local switch type.

Athom

Vesternet Hardware Devices are supported via the Vesternet App which is installable from the Athom App Store.

Vesternet App

Available here.

Simply click "install" to automatically download and install the App onto your Athom Homey Smart Home Controller!

This Vesternet Z-Wave Device has the following features when used with our supporting App in the Athom Homey Smart Home Controller (tested with Athom firmware version 6.0.0-rc.4).

  • Supports On, Off and Dimming Control from the App.
  • Reports On and Off and Dimming Events when operated from the local switch.
  • Can be used as a "Trigger" for On, Off and Dimming Events in Flows.
  • Can be used as an "Action" for On, Off and Dimming Control in Flows.

....back


Vesternet Z-Wave 1 Zone Wall Controller (VES-ZW-WAL-003)

Vesternet Z-Wave 1 Zone Wall Controller (VES-ZW-WAL-003)

The VES-ZW-WAL-003 is a Z-Wave Wall Controller / Remote Control and offers the following features:

  • Two buttons with simple on / off markings
  • Pushed, held and released events for each button
  • Standard 80mm x 80mm form factor with sticky pad or screw mounting
  • Indicator LED
  • Long life CR2450 Battery
  • Z-Wave Plus with S2 Security

A manual for this device can be downloaded here.

SmartThings

To ease your journey with Vesternet Z-Wave hardware, a full user manual for using this device in the SmartThings Smart Home Controller is available here.

If you're already familiar with SmartThings then you can simply get stuck in using the Device Handler below!

Vesternet Z-Wave Device Handlers

Available here.

Two files are required for this particular Device:

  • Vesternet VES-ZW-WAL-003 1 Zone Wall Controller.groovy
  • Vesternet VES-ZW-WAL-003 1 Zone Wall Controller Child Button.groovy

This Vesternet Z-Wave Device has the following features when used with our supporting Device Handler in the SmartThings Smart Home Controller (tested with SmartThings firmware version 000.032.00012).

  • Supports Pushed, Held, and Released Events for both buttons (SmartThings doesn't offer an Event for "Released" so our Device Handler utilises the "Double Pushed" Event instead).
  • Reports battery level in the Device Details section of the App
  • Allows assigning of "Actions" for all button Events from the Device Details section of the App.
  • Allows adding of "Automations" for the battery level from the Automations section of the App.

Hubitat

If you're already familiar with Hubitat then you can simply get stuck in using the Device Handler below!

Vesternet Z-Wave Device Drivers

Available here.

One file is required for this particular Device:

  • Vesternet VES-ZW-WAL-003 1 Zone Wall Controller.groovy

This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports Pushed, Held, and Released Events for both buttons.
  • Reports Battery Level Events.
  • Can be used as a "Trigger" for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.

Athom

Vesternet Hardware Devices are supported via the Vesternet App which is installable from the Athom App Store.

Vesternet App

Available here.

Simply click "install" to automatically download and install the App onto your Athom Homey Smart Home Controller!

This Vesternet Z-Wave Device has the following features when used with our supporting App in the Athom Homey Smart Home Controller (tested with Athom firmware version 6.0.0-rc.4).

  • Supports Pushed, Held, and Released Events for both buttons.
  • Reports Battery Level Events.
  • Can be used as a "Trigger" for Pushed, Held, and Released Events in Flows.

....back


Getting Help and Support

We hope that you are satisfied with your purchase and don't experience any issues with installing and using your new Vesternet Device. As always, help is at hand should you need it by simply following the links below.

Vesternet Technical Suppport

Vesternet Devices Quick Start

Vesternet Devices

....back


Rated Excellent on Trustpilot logo