Question 1

Hi, Will you be able to transfer existing devices, scenes etc from HH2 to the HH3 or will everything have to be done from scratch again? View answer

Asked 5 ´years ago | Fibaro Home Center 3

Question 2

Do you have the EU version? Z-Wave Fibaro Wall Plug Gen5 I need something The will work with Israeli plugs View answer

Asked 5 ´years ago | Z-Wave Fibaro Wall Plug - Schuko

Question 3

Hi , its z wave 868 hz (eu) ? View answer

Asked 5 ´years ago | Z-Wave Fibaro Walli Outlet - Schuko

Question 4

At description it says: "and can also be operated by third-party controllers which support 'Thermostat Mode SET' commands or 'Binary Switch SET' commands." this is bit confusing, will it work with something like smart things hub or hubitat hub? for same idea, as one person already asked, like zoned heating with smart zwave trv's.? View answer

Asked 5 ´years ago | Z-Wave Plus Secure Boiler Receiver HRT Gen5

Question 5

Aside from the upgraded chip, how does this differ from the standard the original RGBW Controller? Are there any benefits worth upgrading for? View answer

Asked 5 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 6

How does this get physically installed? Does it need a backbox/ pattress box? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 7

Is this work with Samsung Smartthing V3 hub? Can I control the switch using google assistant via Samsung Smartthing Hub v3?

Asked 5 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 8

Is this work with Samsung Smartthing V3 hub? Can I use it to switch on and off the philips Hue smart light with Hue Bridge? View answer

Asked 5 ´years ago | Z-Wave Remotec Scene Master

Question 9

Hi, controlling through a z-wave hub (Fibaro HC2) can this turn on and off other IR controlled devices ie ceiling fans, lights TV etc? View answer

Asked 5 ´years ago | Z-Wave Remotec ZXT-600 Z-Wave+ to IR Extender for AC

Question 10

Is this compatible with Vera Plus?

Asked 5 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 11

Does this come with a UK plug socket or a European plug socket? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 12

Hi does anyone know if this device is supported on the Fibaro Home Centre and if so what does the control panel look like? View answer

Asked 5 ´years ago | Brands - Qubino > Z-Wave Qubino RGBW Dimmer Plus

Question 13

What do I kneed to by to be able for my Fibaro home center 2 to sense my hot water tank temperature will this do it or do I require additional components View answer

Asked 5 ´years ago | Z-Wave Secure Pipe Tank Digital Temperature Sensor - 4m Wire

Question 14

Is Z-Wave Plus Aeotec Smart Boost Timer Switch compatible with Piper. Regards, Ruairi

Asked 5 ´years ago | Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 15

is it compatible with HS3 View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 16

How "tall" is the connector? Will it fit on top of this Raspberry Pi 4 case? https://images-na.ssl-images-amazon.com/images/I/71SXo28eeHL._SL1500_.jpg Thank you. View answers

Asked 5 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 17

you said: Popp Mains Adapter can be used to power up the Z-Wave Popp Smoke Detector with mains supply. It eliminates the need to insert batteries in your smoke detector. after we tried to install it without battery it doesn't work then we contacted aeotec support they said: The smoke detector only works with the battery inserted. The smoke detector standard stipulates this. The 12 V supply serves to support the lifetime of the device by supplying the Z-Wave circuit board with external voltage. This doubles the lifetime of the 9V battery. could you explain please? Ahmad View answer

Asked 5 ´years ago | Z-Wave Popp Mains Adapter

Question 18

Will it work with Fibaro (Home Center 2)?

Asked 5 ´years ago | Z-Wave Plus Secure SES303 Temperature & Humidity Sensor Gen5

Question 19

What Bypass should be used in a 2-Wire installation? The manual says; "When installing the Mini Dimmer, with LED loads, in a 2-wired installation, if the load connected to the output starts flickering, we recommend you use a Bypass." I have installed it in to a 2-wire installation with an LED light and it is flickering. The Aeotech and Fibaro dimmers all say that only their own bypass modules are compatible, is this also the case with the Qubino dimmers? View answer

Asked 5 ´years ago | Z-Wave Plus Qubino Mini Dimmer

Question 20

Can you measure the energy through the contractor separately from the smart meter unit View answer

Asked 5 ´years ago | Qubino 32A Contactor for Smart Meter

Question 21

How do you set this to simple on/off rather than dimming. I want to use it in the UK with 2 wire circuit, toggle on off switch connected to S1 and non dimmable CFL or LED bulbs View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 22

Hi does this support LED bulbs? View answer

Asked 5 ´years ago | Z-Wave Plus Qubino Mini Dimmer

Question 23

Does this come with a Zwave licence or is that an additional cost? View answers

Asked 5 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 24

Will this device work fully with Hc2? Thanks View answer

Asked 5 ´years ago | Z-Wave Plus Qubino Mini Dimmer

Question 25

Hi Does this come with a UK standard 3 point plug? I'm trying to create a set up where I have a magnetic strip sensor on a door that will chime once opened and also send an alert to my phone. Do you know if this could be achieved, using this in conjunction with a smart things hub? Thanks View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 26

I assume that one button is included with the Doorbell? Can you please publish the dimensions of the bell (not given in the specification) and confirm that it can be battery powered. Thanks. View answers

Asked 6 ´years ago | Aeotec Button

Question 27

If the z-wave controller is temporarily offline will the chime still sound when the button is pressed, or is all functionality entirely dependent on the z-wave network?

Asked 6 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 28

Can multiple thermostats be associated to this device? ie. Can mulitple devices call for heat via this switch ? View answer

Asked 6 ´years ago | Z-Wave Plus Secure Boiler Receiver HRT Gen5

Question 29

Does the siren/doorbell unit fit directly into a UK 3-pin socket or does it require a euro-adaptor?

Asked 6 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 30

Can you install your own ringtones?

Asked 6 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 31

Is the battery rechargeable or replaceable? View answers

Asked 6 ´years ago | Z-Wave Philio Multisensor - PIR / Light / Temp - Gen5

Question 32

I bought one of these earlier in the year, am hoping to use to add functionality to an automatic gate opener. I've struggled to get it added into Homeseer correctly, only Output 1 has shown up. Have any Homeseer users had any success getting both outputs to add correctly? If so, any tips? View answer

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 33

Does this module work with wood venitian blinds? View answer

Asked 6 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 34

Hi, Can you tell me if the Vision Dimmer Bypass should work with the Fibaro Dimmer 1 module? Thanks View answer

Asked 6 ´years ago | Vision Dimmer Bypass

Question 35

Which z wave stick / hub / device do you recommend for use with Secure Thermostat / Receiver and Homeseer? Please note I am a long time user of Homeseer (early 2000) upgrading from HS1,2 to HS3. For the last 15 years I have used a purpose designed multi (6) zone system controlled by Homeseer running Xap plugin to Phaedrus NETIOM to create heating scenes. I am now moving on to an existing single zone combi boiler dwelling. I have no desire or requirement to rejig the new system to a plumbed multi-zone effort. I see this combination as a first step to migrate to a zwave set up from my X10 devices, curing the heating issue in the process. View answer

Asked 6 ´years ago | Z-Wave Plus Secure Wall Thermostat & Receiver Set - Gen5

Question 36

Does this control both hot water and heating? View answers

Asked 6 ´years ago | Z-Wave Plus Secure Boiler Receiver HRT Gen5

Question 37

Why is there no technical documentation on your site for this device? The description and spec is very poor, as well.

Asked 6 ´years ago | Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 38

Why should i use this product? View answer

Asked 6 ´years ago | Brands - Aeotec > Z-Wave Plus Aeotec Nano Dimmer Bypass

Question 39

Can you clarify what this means, in real terms, "Battery operated possible: 1x PT502035 (400mAh) (only for bridging)"? Can I use it as doorbell with just the batteries or does it have to be plugged in?

Asked 6 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 40

Can these fit into one of the "Aeotec Recessor for MultiSensor 6" per chance, even if they are not designed too? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 41

On what Mhz does it works and does it work on a HC2 from Fibaro View answer

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 42

Can this be mounted outside? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 43

Please advise the lead time for these modules. We need to procure 5 of them as soon as available. Regards, Warwick

Asked 6 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 44

Hello Could I use this connected to the 12v bell output (I.e. the +and- terminals) in my house intruder alarm to tell my Samsung SmartThings box that the siren is ringing? This would be a remote alert as lightening frazzled the built-in comms dialler! It’s not clear to me from the manual that I could put the 12v through to say “it’s ringing” and “stopped ringing” when it’s 0v. I am also not clear on whether I will be able to configure it with ST (I don’t have the Fibaro control system), or not. Thank you in advance. Neil

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 45

Is the usb power on permanently or does it switch on and off with the main unit? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 46

I've tried to standardise with Fibaro kit but their Dimmer 2 doesn't appear to offer 0-10V output like this Qubino Flush Dimmer. Is that right? View answer

Asked 6 ´years ago | Z-Wave Qubino Flush Dimmer 0-10V Plus

Question 47

Is this model come with a UK plug ?

Asked 6 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 48

Hello, I was wondering whether you have this item suitable for an american-style box, at the size of 120mm wide, instead of 86mm? Thanks, Gal.

Asked 6 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Two Load - UK

Question 49

Managed to put in a workaround but I found with a original style lightbulb it would cut out when I turn the brightness above 60% and then start flashing red. I've updated the config so that max power is 60% as this is just the porch light and I don't really need it that bright in there. But I'm concerned what happens if I purchase more.

Asked 6 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 50

I ordered this product before 3 days. Can you tell when the item will be in stock? Thank you.

Asked 6 ´years ago | Z-Wave Fibaro Walli Dimmer

Browse by Topic

Tools