Brands - Fibaro Q&A

Question 1

Does this module need retractive switches too? I'm guessing yes and it needs 2. View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 2

Is this device suitable for switching 230V LED lights, or would it be better to use the double relay switch instead? Since it doesn't have dry contacts, I'm wondering if the LEDs may flicker while switched off (as is the case for the dimmer module). View answers

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 3

Will this work outside as a motion detection? View answers

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 4

I look at the instruction manual for the wiring diagrams. I have two wires coming from the wall and it has no wall switch. When I moved in, it had a cheap strip light with shaver socket and its own onboard switch. I have removed this old fitting. I am planning to install an LED strip light running off 12V. I wish to use the Fibaro Dimmer 2 with bypass 2. When I look at the wiring diagram for a 2 wire setup, it assumes I will have a Wall Switch. This makes the diagram useless to me. Can anybody help with an adjusted diagram please? View answer

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 5

Can you fit this in the light fitting or does it have to be in the switch socket? I think it probably has to be in the switch but I want to be sure before I start drilling out space behind the switch box. Thanks! View answers

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 6

Which would work better with the Fibaro Dimmer 2? GU5.3 (MR16/12V) LED bulbs or GU10 (240V) LED bulbs? (I'm replacing MR16 halogen bulbs and trying to decide whether to convert to GU10 fittings). View answers

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 7

What is the range at which the gestures will work over? And are there any materials the Swipe will not work behind, e.g. glass?

Asked 8 ´years ago | Z-Wave Fibaro Swipe

Question 8

The Fibaro Double Switch 2 Gen5 will work with vera plus? View answers

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 9

As far as I know this model like previous models should have "Manager Power" option, but in your site usage it didn't mention it. it realy does not have this option?! View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 10

briefly switches on then off when I use the attached physical switch rocker. Have cabled as per diagram for a single switch S1 to switch COM leftmost live to switch Live mains live (old style red) to rightmost live mains neutral (old style black) to N bridged N and Q1. Device is picked up in smartthings though toggle on/off doesn't do anything ... only a brief switch on and off when using attached physical switch rocker. Any ideas? View answers

Asked 8 ´years ago | Z-Wave Fibaro Single Switch 2

Question 11

How many LED GU10 Spotlights can one use with ONE Fibaro Dimmer 2? And are there any recommended LED GU10 Spotlights? View answers

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 12

How does this differ from the fibaro relay module? They seem to do exactly the same job. View answers

Asked 8 ´years ago | Z-Wave Fibaro Single Switch 2

Question 13

Does this support lower voltage DC like the earlier versions did, or only mains? View answer

Asked 9 ´years ago | Z-Wave Fibaro Double Switch 2

Question 14

Is this new Gen5 fuse protected to 8A To use in sockets or do you still require to fit an upstream fuse spur at 8A? Does this report power monitoring? View answer

Asked 9 ´years ago | Z-Wave Fibaro Single Switch 2

Question 15

When will support for the Button be available in Vera Home Control ? View answers

Asked 9 ´years ago | Z-Wave Fibaro Button

Question 16

Is this able to be used outside e.g as a door bell? View answer

Asked 9 ´years ago | Z-Wave Fibaro Button

Question 17

Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Asked 9 ´years ago | Z-Wave Fibaro Button

Question 18

Looking at Fibaro's site, they mention this can be powered by connecting it to VDC source. My current smoke alarms (3 of them) appear to be powered by 240v mains wiring. How can I utilise this with these smoke sensors? View answers

Asked 9 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 19

How do these cope installed in metal back boxes in a brick wall? I was considering installing these in the ceiling with the light fitting, but with some of the wire configurations i have here, i will need to install deeper metallic back boxes and install behind the switches. View answer

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 20

Can you link sensors together so that if one goes off the others will also trigger? View answers

Asked 9 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 21

Will this be usable as a on/off toggle for Fluorescent tube lights? View answer

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 22

Does this work with Vera Plus? or has anyone tried it yet? View answers

Asked 9 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 23

Does this new Z-Wave Fibaro Motion Sensor Gen5 version work with the zipabox? or is it just vera edge having problems? View answers

Asked 9 ´years ago | Z-Wave Fibaro Multi Sensor

Question 24

is this a USA frequency or EU? View answer

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 25

What is the Z-wave frequency for this device? View answers

Asked 9 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 26

Can you use this with LED spotlights that don't dim? I have a set of 6 in the hallway that 'd like to come on if movement is detected. View answers

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 27

Does this work with cats? Pet Friendly? View answer

Asked 9 ´years ago | Z-Wave Fibaro Multi Sensor

Question 28

I have one of these and a Samsung smart hub... hoping use various items from one place. The motion sensor is recognised as a door/window sensor? View answers

Asked 9 ´years ago | Z-Wave Fibaro Multi Sensor

Question 29

Can the earthquake mode be ran concurrently with motion detection? View answer

Asked 9 ´years ago | Z-Wave Fibaro Multi Sensor

Question 30

Do you have a Release date and when will it be available ? View answer

Asked 9 ´years ago | Z-Wave Fibaro Swipe

Question 31

Whats new in this Gen 5 version? View answers

Asked 9 ´years ago | Z-Wave Fibaro Multi Sensor

Question 32

Does this work with both UI5 and UI7? View answers

Asked 9 ´years ago | Z-Wave Fibaro Multi Sensor

Question 33

I'm trying to find a good light switch to connect this. Preferably a glass finish touch pad and will allow physical control of fibaro dimmer setting. Any suggestions? View answers

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 34

Does this work with switches like Schneider Clipsal with a led ambient light? View answers

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 35

Is this zwave-eu freq? Do you have black in stock and how does the configuration works with vera edge or non fibaro controllers View answer

Asked 9 ´years ago | Z-Wave Fibaro Swipe

Question 36

Will this work if retrofitted into a box with a brass plate ? I'm concerned if the antenna will be able to connect to the z-wave network. View answers

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 37

Hi. I'm planning on running 2 separate LED lighting circuits, each circuit will have a separate toggle switch but I was planning on using a double switch box. Can the dimmer 2 be wired into both circuits...or do I need to buy 2 modules? View answers

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 38

Can you use a standard 250W dimmer dial switch to operate dimming on an LED cct? View answer

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 39

Is there a mains powered version of this smoke detector? View answers

Asked 9 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 40

Does this work with Samsung smart things without the fibaro controller? View answers

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 41

Does this work with homeseer hs3? View answers

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 42

What's the minimum size switch box for the Fibaro Universal Dimmer 2 to fit in? I realise 45mm is recommended but will 35mm work? View answers

Asked 9 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Brands - Fibaro Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools