Have these yet been proven to work with Vera Edge or Vera Plus? I have installed one and whilst, after hours working on-line (computer and telephone) with a Micaverde technician (or two), the binary function works, we can get no sensible response from the 2 x DS18B20 connected. View answer
Asked 5 ´years ago | Z-Wave Fibaro Smart Implant
We are rewiring the house and as part of this will have a neutral at each switch. Two questions I have are 1) for loads less than 50W is a bypass still required even in a 3 wire setup? 2) is there a cheaper alternative to the fibaro which still offers smooth LED dimming? Thanks. View answer
Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2
does this price include VAT View answer
Asked 5 ´years ago | Z fali Fibaro CO czujnika
Asked 5 ´years ago | Fibaro Home Center 3
When will you start shipping the HC3?
Asked 5 ´years ago | Fibaro Home Center 3
On Fibaro's website for this product it shows it being able to be installed in audio equipment but there are no references to that type of setup in the manual or instructions. Has anyone tried to use the implant in any appliance to make it smart? If so I assume the compatibility will be based on the appliance and the internal wiring if it can be done. View answer
Asked 5 ´years ago | Z-Wave Fibaro Smart Implant
Hi , its z wave 868 hz (eu) ? View answer
Asked 5 ´years ago | Z-Wave Fibaro Walli Outlet - Schuko
I bought one of these earlier in the year, am hoping to use to add functionality to an automatic gate opener. I've struggled to get it added into Homeseer correctly, only Output 1 has shown up. Have any Homeseer users had any success getting both outputs to add correctly? If so, any tips? View answer
Asked 5 ´years ago | Z-Wave Fibaro Smart Implant
Asked 6 ´years ago | Z-Wave Fibaro Smart Implant
Asked 6 ´years ago | Z-Wave Fibaro Walli Dimmer
Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2
Asked 6 ´years ago | Z-Wave Fibaro Walli Dimmer
Asked 6 ´years ago | Z-Wave Fibaro Smart Implant
Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2
Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2
Hi, I've recently purchased one of these devices and installed it on my veraplus. Its created the 'Double Switch 2', Q1 Load, and Q2 Load. On the double switch device, its got the status: Failed at: Setting special association. The 2 load switches appear to work ok. Any ideas how to resolve? Thanks View answer
Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2
Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2
Would this work locally "out of the box" without connecting to a central z-wave controller? I understand remote commands require a controller but would a hardwired momentary switch be able to turn on the load immediately after wiring as well? View answer
Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2
Just read the English installation instructions for the Fibaro FGS 223. They state "The device is designed for installation in a wall switch box of depth not less than 600mm." I'm not sure you can get a back box of that depth in the UK. Does this mean we can't use the device in a standard UK box? View answer
Asked 7 ´years ago | Z-Wave Fibaro Double Switch 2
Hi, I have box with 3 switches controlling 3 lights (one for each). Is it possible to install this module to control one light with S1 and the other 2 lights with S2? the idea is that the controller will open/close the 2 lights together while manually using the physical switches I will still have separate control. Thanks. View answers
Asked 7 ´years ago | Z-Wave Fibaro Double Switch 2
I have 18 LEDs at 5w and 0.5 power factor. Would I be able to use the Dimmer 2 if were to use alongside the Bypass 2 or is the wattage too high? Based on the technical resources I think it would overload it but I have seen some responses to questions saying this number of bulbs should be fine. View answer
Asked 7 ´years ago | Z-Wave Fibaro Universal Dimmer 2
is this using 868.4Hz frequency? View answer
Asked 7 ´years ago | Z-Wave Fibaro Multi Sensor
I am currently using these with 240v halogen bulbs and wanted to switch to LED. In some places it will be 3 wired and in others I will add a bypass unit. Is there any particular brands of dimmable 240v LED bulbs that people have had success or problems with? Or am I pretty safe just going with shop own brand? They would be either E27 golfball bulbs or gu10 spots View answer
Asked 7 ´years ago | Z-Wave Fibaro Universal Dimmer 2
I'm trying to use this switch to control load by both S1 and S2 (connected to separate switch), but it my case switch connected into S2 has no impact on the load. I had no problem with achieving the same effect with Everspring module AN179, but somehow it does not work with Fibaro. Have anyone has achieved such configuration (controlling load by both S1 & S2)? View answer
Asked 7 ´years ago | Z-Wave Fibaro Single Switch 2
I was seriously thinking about buying one of these for a house I am buying off plan but put off by the fact that this cannot be installed in direct sunlight and needs to be protected from rain. How can this be used as an external door entry system if it can’t be used outside? Also, with the camera, can I hook this up to an NVR to record the live stream like a CCTV camera? If the above can be confirmed, that would be great! Thanks, Hal View answer
Asked 7 ´years ago | Fibaro Intercom
