Brands - Qubino Q&A

Question 1

How do you reset a Qubino flush dimmer? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 2

Is the relay compatible with other Z-Wave Plus devices? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 3

What is the benefit of using Z-Wave Plus technology in the relay? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 4

Is the relay Z-Wave Plus certified? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 5

Can the relay report temperature? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 6

Is the relay capable of power monitoring? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 7

What types of switches is the relay compatible with? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 8

What type of installation does the relay require? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 9

What is the load rating for the relay at 24V DC? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 10

What is the load rating for the relay at 230V AC? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 11

What power supply does the relay work with? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 12

How many channels does the relay support? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 13

What is the maximum load capacity for each channel? View answer

Asked 5 ´months ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 14

SmartThings Aquarium Temperature monitoring View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Module Thermostat Plus

Question 15

What device driver are people using in hubitat for this device? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Module Thermostat Plus

Question 16

how long is the sensor probe cable? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Module Thermostat Plus

Question 17

What is the accuracy of the thermostat? Plus or minus how many degrees? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Module Thermostat Plus

Question 18

Can this control an attic fan? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Module Thermostat Plus

Question 19

Can this be used with a 24 vac system? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Module Thermostat Plus

Question 20

Is the zmnhbd3 z-wave 2 relays suitable for controling ( on/off only) a cailing fan? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 21

Is it absolutely mandatory to use a hub with this device? Would it connect directly to Alexa or my Android phone? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Module Thermostat Plus

Question 22

Does this(zmnhbd3 z-wave 2 relays) work with led lights? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 23

Does this relay work without a neutral wire? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 24

will this handle stove exhaust fan or bathroom exhaust fans? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 25

Did it include the Rechargeable Lithium Battery in the package? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 26

Hi, anyone using it with Athom Homey ? Does it show correctly both the power and energy ? Non-USB version of the UK plug is not showing the power at all .. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 27

Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 28

Do the Vesternet 2,4 & 8 button z wave wall controllers work with Vera Edge? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 29

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion: https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429 I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 30

Does this work with Samsung Smarthings? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 31

Could I use this module to control 300w towel radiator View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 32

If I put the relay on momentary mode and press the momentary switch once (and release), the light that connect to relay output will stay at ON (toggle) till I press the momentry again, is that correct? If so, does it means that for 2 way implementation I just need 2 momentry switches connect in parallel to the same input at the qubino 2 relay and every press on one of the momentry switch will toggle the light to ON or OFF? I can't find such suggestion in you app notes guides. Thank you! View answer

Asked 5 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 33

Hi does anyone know if this device is supported on the Fibaro Home Centre and if so what does the control panel look like? View answer

Asked 5 ´years ago | Brands - Qubino > Z-Wave Qubino RGBW Dimmer Plus

Question 34

Can I connect the module N/L to 230V while Q and I1,2,3 are being used with a 24VDC device? View answers

Asked 7 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 35

Is it possible to use these to control a 240v relay without chatter? We tried this by altering parameters 11,12 and 15 but were not successful. Any advice appreciated. View answer

Asked 8 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 36

Why do these show as requiring a fuse whereas other like the Fibaro do not show this as a requirement in the wiring diagrams? View answer

Asked 8 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 37

I read the following in the manual: Rated output power 8A for single output channel,13A at max.(3,25A for R.G.B.W. single output channel is suggested) I'm planing to control two strips of LED with the RGBW-Dimmer. Using two of the four channels. How much power (current) can each of the two LED-strips have? (I'm using a 24V driver). Maybe 13A/2 = 6.5A per channel? View answer

Asked 8 ´years ago | Brands - Qubino > Z-Wave Qubino RGBW Dimmer Plus

Question 38

Can this be connected to two bell-push switches, to activate two lighting scenes? The lights would be powered by other zwave modules (dimmers), so these would purely be used to trigger the scenes. View answer

Asked 8 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 39

Can this be used as four separate 36w 12v channels? I want to control four sets of 12v led lamps but am not sure if it can only be controlled as if it were colour, so I would have to choose, for instance, yellow, to have two sets on? View answer

Asked 8 ´years ago | Brands - Qubino > Z-Wave Qubino RGBW Dimmer Plus

Question 40

I am looking for a Z-Wave Plus LED controller that has DMX512 output. Does this device or do you know of any others that fit the bill please? View answer

Asked 8 ´years ago | Brands - Qubino > Z-Wave Qubino RGBW Dimmer Plus

Question 41

Does anyone know if this unit is stable with HomeSeer? I have a couple of the Fibaro Dual Relay units but their status reporting is flaky at best and I cannot rely on them. - Thanks! View answer

Asked 8 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 42

Can this unit be controlled from other z-wave controllers? or is the smart meter required? View answer

Asked 8 ´years ago | Brands - Qubino > Z-Wave Qubino Smart Meter ZMNHTD1 Plus

Question 43

Can someone explain dry / volrage free contacts? Trying to decide which module to use for controlling some outside lights. View answers

Asked 8 ´years ago | Z-Wave Qubino Flush 1D Relay Plus

Question 44

Is it working with HC2? I have some issues with it. View answers

Asked 8 ´years ago | Brands - Qubino > Z-Wave Qubino Smart Meter ZMNHTD1 Plus

Question 45

In the manual it says 'Electrical installation must be protected by directly associated over current protection fuse 4A, gG or Time lag T....'. How can I do this? View answers

Asked 9 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 46

is there a video demonstration on how to connect cables? official qubino videos does not show how to connect.. View answers

Asked 9 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 47

Can I turn on/off my lights with the existing switches? or do I need to control with controller application or via external switch? View answer

Asked 9 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 48

I used these in the past with LED power supplies but unfortunately even though the static current was under 1 amp, after a while the power supply inrush current would weld the relay contacts closed. I put a thermistor in-line with the load to limit the inrush and Qubino said they were aware of this and working on a solution. Does anyone know if this problem has been fixed?

Asked 9 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 49

how do you wire this on a 2wire 2switch system do you connect the N with each of the wires going to the lights? View answers

Asked 9 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 50

I bought and installed this. However to get it to act like a momentary push button for my garage door I need to set some parameters. What's the best way to do that? I have a SmartThings hub. Thanks! View answers

Asked 9 ´years ago | Z-Wave Qubino Flush 1D Relay Plus

Brands - Qubino Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools