Hi,Regarding the Z-Wave Plus Aeotec Z-Stick 7, it shows “in stock soon”, what does this mean, do you happen to have more info (eta) on this? Also, I presume when I buy this product the frequency band will be comply with EU (as I am living in Holland)?Thank you in advance!Kr,Daniel View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec Z-Stick 7
Will these dimmers work with Zipato Zipabox 2? View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec Z-Pi 7
Can't add this to Homeseer - just errors on Addnode.Also, previously with version 6 I have a poe splitter to power it.With this version it doesn't seem to work and a USB to micro usb is supplied. Presumably I need to poe split differently??? ( not entirely sure why it doesn't power ) View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 7
Is this supplied with a schuko-to-UK adapter? View answer
Asked 4 ´years ago | Aeotec Range Extender 7 - EU Socket
The marketing and product box for this item promotes that you can plug it in and power it from a nearby socket. They show this in the manual for the US 110v version , but for the UK/EU 230v version it suggests it has to be hard wired into the main consumer unit ?As I have a socket right next to the consumer unit? Please could someone explain why I can’t connect the power cable to a UK plug and power it, rather than pay for an electrician to hardwire it? View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)
Sensor 6 has several flaws. Reset button link via a piece of dodgy plastic, poor light level reading, poor UV reading.Apart from these, it was very good. Have they been addressed in Sensor 7? E.G. What range is read for the light level?Can I trust the reset mechanism? Can I assume it will work well with RaZberry? View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 7
Will this work with lights and smart plugs connected via a Hue gateway? More specifically, I am using Home Assistant with a Hue gateway controlling a mix of Ikea Tradfri and other brands of bulbs/smart plugs. I am looking for a wall-mounted controller that Home Assistant can see and that ideally can control lights directly in case the hub loses connectivity. View answer
Asked 4 ´years ago | Vesternet Zigbee Wall Controller - 8 Button
Does this work with Home Assistant? View answer
Asked 4 ´years ago | Vesternet Zigbee Dimmer
Can this MCO MH7H-EH V2 thermostat be used to control both Electric Under Floor heating and a Towel warmer, but both independantly from each other please?If not, is there an alternative product which can do this ?Many thanks,Richard BlatchBoxford Suffolk View answer
Asked 4 ´years ago | Z-Wave Plus MCO Home Electrical Heating Thermostat with Humidity Sensor - V2
Are the contacts in this model 'dry'? I want to use the module to momentarily connect a separate 12VDC circuit. (Mimicking a make/break switch.)Already have many FGS211/FGS221 modules which are dry. But want to make sure there is no change of internal circuitry for this module. View answer
Asked 4 ´years ago | Z-Wave Fibaro Double Switch 2
what is the size of the motion sensor? View answer
Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor
Is it support EU frequency (868.42)? View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec Trisensor
When will this item be in stock? View answer
Asked 5 ´years ago | Zigbee Aeotec SmartThings Motion Sensor
How long is the mains cable please? View answer
Asked 5 ´years ago | Z-Wave Plus Aeotec Siren 6
Just wondering if you shipp to Cyprus,and also would I need a Samsung Smartthings account on a UK address (region) as I saw many comments that this hubs are theoretically for US/UK market ,will it function normally with an European account via the Samsung app? Feedback much appreciated . Thanks View answer
Asked 5 ´years ago | Aeotec Smart Home Hub
Is the logo on the front removable ? View answer
Asked 5 ´years ago | Z-Wave Plus MCO Home Glass Touch Dimmer UK
Hello, I'm looking to update my secure 321 Thermostat with something that looks a bit more modern but it needs to be battery driven do you have anything that will work with the secure 2 channel receiver I just purchased from you, thanks View answer
Asked 5 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 2 Pipe - Black
Hi All After years of trying to find a good zwave remote control I think I might have hit on a good (crazy) idea. Would this module work behind a light switch if there was no output load to control ? My plan is to use something like this https://www.ukelectricalsupplies.com/retrotouch-07100-simplicity-white-2-gang-retractive-light-switch.htm, so i should get the ability to control four scenes, using s1 and s2 Would I be correct that it will work with out a light to control. Thanks Rob View answer
Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2
What is the power consumption in watts? View answer
Asked 6 ´years ago | Fibaro Home Center 3
Has anyone managed to get these working with HomeSeer v3? I am having difficulties getting all four switches to function in HS3. All four Lights function, but my use case needs the binary switches, not the lights. Every time I exclude and include it's a different combination of Switches that don't work. The lights have worked every time so far. View answer
Asked 6 ´years ago | Z-Wave Plus Aeotec WallMote Quad
