Smart RGBW LED & DC Lighting Controller with Z-Wave 800
Control RGBW LED strips or DC lighting from your Z-Wave controller, compatible with 12–24V DC strips and fixtures, with optional manual control from a standard or momentary wall switch. The 800 Series Z-Wave chip delivers fast, reliable performance. SmartStart and S2 security ensure secure setup, and a multicolour LED indicator allows easy troubleshooting. Optional scene control and a built-in signal repeater enhance your Z-Wave mesh. Z-Wave controller required, sold separately.
RGBW Dimmer Power & Network Setup Guide
You’ll need a 12–24V DC power supply to run both your LED strip and the RGBW dimmer. Use the wiring diagram to connect the dimmer to the power supply, LED strip, and an optional wall switch, using a flathead screwdriver and 16 AWG jumper wires.
Add the dimmer to your Z-Wave network with SmartStart (if supported) by scanning the QR code on the device and entering the SDK code to confirm.
For manual inclusion, set your Z-Wave controller to inclusion mode, then press the Z-Wave button on the dimmer three times quickly to complete setup.
Smart Control for LED Strips and Lighting
Automating your LED strips lets you control brightness and colour easily, setting the perfect mood without manual adjustments. The RGBW dimmer works with 12–24V single- or multi-colour LED strips and up to four Z-Wave channels. It automatically shows red, green, blue, and white controls, which can be renamed for custom setups. Avoid strips with built-in wireless controllers or addressable LEDs.
Use a power supply with the correct voltage and enough wattage for your LEDs. For manual control, connect a momentary switch, or use a scene controller or wireless Z-Wave remote to trigger preset lighting scenes.
Performance-Driven Hardware
This compact device provides flexible control for LED strips with four channels for red, green, blue, and white. It supports single- or dual-colour 12–24 V strips within the maximum wattage.
A built-in button allows direct control and hub pairing or resets. Easy to mount and wire, it includes a multi-colour LED indicator for status, while the Z-Wave 800 series chip ensures reliable performance and extended range.
