Skip to content
US Express $10 Delivery. Shipping Zigbee & Z-Wave (US 908.42)

Vesternet Zigbee Dimmer

Original price $39.89 - Original price $39.89
Original price
$39.89 - $39.89
Current price $39.89

In stock iconIn Stock

  • FREE Bypass (worth £9)
  • FREE UK Delivery
  • 1 Hour Response Technical Support
  • Compatibility Guaranteed with Hubitat, Homey & SmartThings
  • 2-Wire (without Neutral) and 3-Wire (with Neutral)
  • Use with Momentary Switches
  • Supports most bulbs inc. LED's (Trailing Edge)
  • Works with hub or directly to Zigbee remote / wall controller
  • Zigbee 3.0
Compare Vesternet Devices

Works With All Popular Controllers...

Here’s What’s Included With Every Vesternet Device

FREE UK Delivery

Any quantity of any model, ships Free from our UK warehouse stock.

3 Year Extended Warranty

If a fault occurs, we’ve got you covered - we’ll swap it for a new one without question.

Lifetime Controller Compatibility

With self published drivers and native support for the main hubs (updated regularly), the smart home compatibility worry is gone forever with Vesternet devices.

Dedicated User Guides

For the main controllers we publish our own dedicated manuals including step-by-step instructions for setup and usage.

Always Z-Wave and Zigbee Options

Every Vesternet product has both versions available, so you get the same consistent aesthetics in each model if you're running a multi-protocol system. You’re then free to decide which wireless technology is right for you in any scenario.

VIP Technical Support

You’ll receive a dedicated tech support email address with priority response times - any problems or questions about Vesternet devices are answered within the hour.

30 Day Seamless Returns

100% satisfaction guarantee - take it home, try it out and if you’re not happy we’ll take it back and refund, no questions asked.

2-Wire (without Neutral) or 3-Wire (with Neutral)

Supports 2-Wire or 3-Wire wiring scenarios for flexible installation possibilities, also comes with Bypass accessory to stabilise operation when used with low load rating lighting.

Soft start lighting

Rather than turning on instantly at your desired dimming level, the module s-l-o-w-l-y ramps up, much kinder on your eyes in the middle of the night as well as prolonging the life of your lighting.

Trailing Edge Dimming

Supports Trailing Edge dimming to ensure the best compatibility with LED lighting loads.

Power, Energy, Voltage & Current Metering

Save energy and reduce your bills by monitoring how much electricity your lighting uses. By comparing usage at different dimming levels you may find that you can lower light output with minimal effect on the environment but maximum impact on your monthly outgoings!

No Hub Required

Can operate standalone if needed, for example being directly paired to a remote control or wall controller. This means for simple installations you don't even need a hub, but can optionally add a hub at a later date to expand the functionality available.

Zigbee 3.0

Supports the latest Zigbee 3.0 standard which builds on the previous ZHA and ZLL offerings, making it backwards compatible with any hub that supports those.

Frequently Asked Questions

Yes, the module works with both 2-Wire (without Neutral) and 3-Wire (with Neutral) wiring.
Yes, the module works in various wiring scenarios, see the manuals in the links off of our quick-start-guide for further information.
Yes, the module works with Momentary switches.
No, the module only works with Momentary switches.
The Bypass accessory is provided to stabilise the circuit when using 2-Wire (without Neutral) wiring since the module has to leak current through the load in order to power itself.
The module supports most light bulbs, including LEDs which work with Trailing Edge dimming.
Yes, the module supports power, energy, voltage and current readings.
1.8A for Resistive loads and 0.8A for Capacitive / Inductive loads.
Yes, this device works with the Philips Hue Bridge like any other light / switch device.
We provide dedicated support for the SmartThings, Hubitat and Athom Zigbee Hub. For other Zigbee Hubs, this device uses Zigbee 3.0 so you should check with the Zigbee Hub manufacturer to be sure...
No, the module can operate without a Zigbee Hub, for example by being paired directly to a remote control or wall controller.
Visit the “Specifications” tab above.
Visit for our quick-start-guide, which also has links to product manuals.
Yes, OTA firmware updating is supported by these devices but is dependent on the Controller offering that functionality. OTA firmware files are available on request, see the link off of our quick-start-guide for further information
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
365 Day Returns
Free UK Shipping

Technical details:

  • 2-Wire (without Neutral) or 3-Wire (with Neutral)
  • Momentary Switches
  • 1.8A Resistive Load
  • 0.8A Capacitive / Inductive Load
  • 45.5 x 45 x 20.3 mm
  • Trailing Edge Dimming
  • Power, Energy, Voltage & Current Metering
  • Soft Start
  • Configurable Minimum and Startup Brightness
  • Bypass Required for certain load types
  • Supports ZigBee Groups & Scenes
  • Can operate standalone e.g. direct paired to a remote control or wall controller
Included in this product:
  • ZigBee
Learn more:
We ship worldwide... simply add products to cart to see real time shipping prices & delivery times based on weight and location.

If you’re not 100% satisfied with your purchase you can return any unused products within 365 days.

If you have problems with a new purchase, our support team will work with you to resolve. And if you still have any concerns you can return it within 14 days for replacement or refund.