Vesternet Z-Wave 2 Channel Switch - Technical Support - Home Assistant - Z-Wave JS

The VES-ZW-SWI-014 is a Z-Wave 2 Channel Switch and offers the following features:

  • 3-Wire (with Neutral) wiring
  • 2 Output Channels
  • 2 Switch Input Channels
  • Supports Momentary Switches
  • Supports Scene Commands For Switch Inputs
  • 5.1A Resistive Load (1.7A Capacitive / Inductive Load) per channel
  • Power, Energy, Voltage & Current Metering (whole device only)
  • Small Installation Size 45.5 x 45 x 20.3 mm
  • Power Failure Load State Remembering
  • Z-Wave Plus with S2 Security


A manual for this device can be downloaded here.

Vesternet Z-Wave Device Configuration Files

These are officially available via the are officially available via the Z-Wave JS codebase, meaning that with a recent Z-Wave JS installation Vesternet Z-Wave devices should work out-of-the-box in Home Assistant.

Please report any issues with the Vesternet Z-Wave Device Configuration Files by submitting a technical request ticket.

This Vesternet Device has the following features when used with our supporting Device Configuration File in Z-Wave JS (tested with Z-Wave JS UI / Z-Wave JS version 8.8.6 / 10.10.0).

  • Supports On and Off Control of each channel.
  • Reports On and Off Events for each channel when operated from the local switch.
  • Reports Power, Energy, Current and Voltage Meters for the whole device.
  • Has configuration options for all available parameters.