Shelly Qubino Wave Pro 3

Three Independent Channels on One DIN Module

Shelly Qubino Wave Pro 3 is a three-channel Z-Wave 800 relay designed to sit on the DIN rail inside your consumer unit or distribution board. Each of its three potential-free (dry contact) outputs switches up to 16 A, with up to 48 A across the whole module, so one compact device can automate three separate circuits without any extra wiring in the rooms themselves.

Built for the Consumer Unit

At 96 × 53 × 59 mm it clips straight onto a standard DIN rail, keeping all of the smart switching tidy and out of sight. It runs on 110–240 V AC, uses less than 0.3 W itself, and has three switch or push-button inputs so the existing wall switches keep working alongside your Z-Wave controller. It is ideal for new builds, rewires and commercial premises.

Smarter Lighting Control

Put three lighting circuits on schedules, timers and scenes. Switch whole areas off automatically at the end of the day, bring them back only where they are needed in the morning, or link them to motion sensors so lights are never left on in empty rooms. Automatic on and off timers can be set for each channel individually.

Heating, Valves, Pumps and Ventilation

Because the outputs are potential-free, Wave Pro 3 can switch more than just lights. Use it to control motorised valves, underfloor heating zones, towel rails, circulation pumps or extractor fans. Combine it with Z-Wave temperature and humidity sensors for heating and ventilation that responds to the actual conditions in each room.

Cut Wasted Energy

Schedule the power to sockets and non-essential equipment so it is switched off overnight and at weekends, then restored automatically when it is needed. Each channel can also be set to return to its previous state after a power cut, and associations let it control other Z-Wave devices directly, even without going through the controller.

Z-Wave 800 with S2 Security

Wave Pro 3 works with any certified Z-Wave controller, including Home Assistant, Hubitat and Homey Pro. In mesh mode it also acts as a repeater. S2 security, SmartStart inclusion, over-the-air updates and built-in overheating protection come as standard, in a flame-retardant housing.